Wood Epoxies | McMaster-Carr

Filter by

Product Family

Container Type

For Joining

Color

Maximum Temperature

Begins to Harden

Reaches Full Strength

Manufacturer Model Name

Fixmaster Underwater Repair Epoxy

HighHeat

HP 250

MarineWeld

Nordbak Chemical Resistant Coating

Formulation

Performance

Type

Consistency

Manufacturer

Material

Cure Type

Mixing Required

Adhesive Type

Clarity

REACH

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Minimum Temperature

117 Products

About Structural Adhesives

Compare epoxy, acrylic, and urethane adhesive options. Then learn about adhesive performance measures and best practices to create a strong bond.

Quick-Set Epoxy Structural Adhesives


Bottle	Cartridge

Single-Use Packet	Syringe

For quick repairs, these epoxies begin to harden in six minutes or less. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Model Number HY4090—A blend of epoxy and instant-bond adhesive for a balance of strength, cure speed, and temperature resistance.

Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.

Gel—Stick in place and keep their exact shape with no flowing or sagging.

Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.

Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.

		Container				Strength
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, psi	Peel	Mix Ratio	Consistency	Viscosity	Temp. Range, ° F	For Joining	Pkg. Qty.		Pkg.
Loctite®



		HY4090	1.69	Cartridge	3 min.	7 day	2,420	Not Rated	1:1	Thick Liquid	19,000 cP	-65 to 300	Composite, Masonry, Metal, Plastic, Rubber, Wood	1	6430A424	000000


		HY4090	1.69	Cartridge	3 min.	7 day	2,420	Not Rated	1:1	Thick Liquid	19,000 cP	-65 to 300	Composite, Masonry, Metal, Plastic, Rubber, Wood	1	6430A574	00000
		HY4090	13.5	Cartridge	3 min.	7 day	2,420	Not Rated	1:1	Thick Liquid	19,000 cP	-65 to 300	Composite, Masonry, Metal, Plastic, Rubber, Wood	1	6430A52	000000


		J-B Weld







						PlasticWeld

						50132	0.85	Syringe	5 min.	60 min.	2,000	Not Rated	1:1	Thick Liquid	9,000 cP	-20 to 300	Composite, Masonry, Metal, Plastic, Rubber, Wood	1	7605A5	0000


						Gorilla



								—	0.84	Syringe	5 min.	24 hr.	3,300	Not Rated	1:1	Thick Liquid	10,000 cP	-10 to 200	Glass, Metal, Plastic, Rubber, Wood	1	7541A51	0000


								Devcon







												1 Minute Epoxy

												14277	1.69	Cartridge	60 sec.	2 hr.	1,600	2 lbf/in. wd.	1:1	Gel	70,000 cP	-40 to 200	Masonry, Metal, Plastic, Wood	1	66215A32	00000




														5 Minute Epoxy

														14200	15	Bottle	5 min.	12 hr.	1,900	2 lbf/in. wd.	1:1	Thick Liquid	10,000 cP	-40 to 200	Masonry, Metal, Plastic, Wood	1	7524A4	00000


														14240	0.84	Syringe	5 min.	48 hr.	2,500	2 lbf/in. wd.	1:1	Gel	Not Rated	-40 to 200	Masonry, Metal, Plastic, Wood	1	7592A31	00000
														14250	0.84	Syringe	5 min.	12 hr.	1,900	2 lbf/in. wd.	1:1	Thick Liquid	10,000 cP	-40 to 200	Masonry, Metal, Plastic, Wood	1	7541A76	00000
														14265	1.69	Cartridge	5 min.	48 hr.	2,500	2 lbf/in. wd.	1:1	Gel	Not Rated	-40 to 200	Masonry, Metal, Plastic, Wood	1	66215A23	00000
														14270	1.69	Cartridge	5 min.	12 hr.	1,900	2 lbf/in. wd.	1:1	Thick Liquid	10,000 cP	-40 to 200	Masonry, Metal, Plastic, Wood	1	66215A31	00000


														Other Structural Adhesives



																—	—	Single-Use Packet	3 min.	24 hr.	3,710	2 lbf/in. wd.	1:1	Paste	400,000 cP	15 to 180	Masonry, Metal, Wood	10	7538A15	00000

Accessories for Structural Adhesives

		Each
Mixer Nozzle for 1.69 fl. oz. Loctite® Cartridges	74695A221	00000
Mixer Nozzle for 1.69 fl. oz. Loctite® and Devcon Cartridges	74695A12	0000
Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. Cartridges	74695A211	0000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	74695A101	000000
Dispensing Gun for 1.69 fl. oz. Cartridges	74695A71	00000
Dispensing Gun for 13.5 fl. oz. Cartridges	1773A34	000000

Epoxy Structural Adhesives


Can	Cartridge	Stick

Syringe	Tube

Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.

Model Number 305-1/2 and Model Number 310A/B—Do not contain solvents.

Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.

Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.

Putty—Slice off a chunk and mold it into the shape you need.

Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.

		Container				Strength
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength	Shear, psi	Peel	Mix Ratio	Consistency	Viscosity	Temp. Range, ° F	Specifications Met	For Joining		Each
3M







				Scotch-Weld

				1838	57.6	Can	60	7 day	2,000	4 lbf/in. wd.	4:5	Paste	492,500 cP	-65 to 350	ASTM E595, MIL-A-52194	Composite, Glass, Metal, Plastic, Rubber, Wood	75065A71	0000000


				1838L	64	Can	60	7 day	2,000	4 lbf/in. wd.	1:1	Thick Liquid	11,000 cP	-65 to 350	—	Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood	75065A74	000000


				Loctite®



						1C	4	Tube	20	72 hr.	1,500	Not Rated	2.5:1	Paste	350,000 cP	-65 to 300	ASTM E595	Metal, Plastic, Rubber, Wood	1813A221	00000


						J-B Weld







										HighHeat

										8297	—	Stick	60	8 hr.	900	Not Rated	—	Putty	Not Rated	-20 to 450	—	Composite, Masonry, Metal, Plastic, Rubber	7605A3	00000




												PlasticWeld

												8237	—	Stick	20	24 hr.	900	Not Rated	—	Putty	Not Rated	-20 to 300	—	Composite, Masonry, Plastic, Rubber	7605A1	0000


												Devcon







																2 Ton Epoxy

																14260	1.69	Cartridge	8	16 hr.	2,250	2 lbf/in. wd.	1:1	Thick Liquid	8,000 cP	-40 to 200	—	Composite, Metal, Plastic, Metal to Composite, Metal to Plastic, Plastic to Composite	66215A24	00000


																14310	0.84	Syringe	8	16 hr.	2,250	2 lbf/in. wd.	1:1	Thick Liquid	8,000 cP	-40 to 200	—	Composite, Metal, Plastic, Metal to Composite, Metal to Plastic, Plastic to Composite	7541A77	00000




																		10 Minute Epoxy

																		14251	1.69	Cartridge	10	90 min.	2,400	20 lbf/in. wd.	1:1	Thick Liquid	80,000 cP	-65 to 200	—	Masonry, Metal, Plastic, Wood	66215A53	00000


14255	1.69																	Cartridge	10	90 min.	2,400	20 lbf/in. wd.	1:1	Paste	90,000 cP	-65 to 200	—	Masonry, Metal, Plastic, Wood	66215A54	00000


Lord



		305-1/2	1.69															Cartridge	60	48 hr.	2,240	84 lbf/in. wd.	1:1	Thick Liquid	23,250 cP	-30 to 250	—	Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass	66195A31	00000


		310A/B	1.69															Cartridge	30	24 hr.	2,520	57 lbf/in. wd.	1:1	Paste	535,000 cP	-40 to 400	—	Composite, Glass, Metal, Plastic, Rubber, Wood	66195A13	00000


		Other Structural Adhesives



				—														1.69	Cartridge	20	24 hr.	2,500	Not Rated	2:1	Thick Liquid	35,000 cP	-65 to 260	—	Ceramic, Composite, Glass, Metal, Plastic, Wood	7524A161	00000

Accessories for Structural Adhesives

Slow-Set Epoxy Structural Adhesives


Can	Syringe	Tube

Take your time positioning parts—these epoxies remain adjustable for at least 90 minutes before setting. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.

Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.

		Container				Strength
	Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear, psi	Peel	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	Specifications Met	For Joining		Each
3M







				Scotch-Weld

				2216	3.3 fl. oz.	Tube	90 min.	7 day	1,700	25 lbf/in. wd.	2:3	Thick Liquid	81,000	-65 to 350	ASTM E595, DOD-A-82720	Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood	75045A65	000000


				2216	4 fl. oz.	Tube	2 hr.	30 day	3,000	25 lbf/in. wd.	1:1	Thick Liquid	10,000	-65 to 350	ASTM E595	Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood	75045A78	00000
				2216	26.6 fl. oz.	Can	90 min.	7 day	1,700	25 lbf/in. wd.	2:3	Thick Liquid	81,000	-65 to 350	ASTM E595, DOD-A-82720	Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood	75045A66	000000
				2216	53.3 fl. oz.	Can	90 min.	7 day	1,700	25 lbf/in. wd.	2:3	Thick Liquid	81,000	-65 to 350	ASTM E595, DOD-A-82720	Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood	75045A67	000000
				2216	64 fl. oz.	Can	2 hr.	30 day	3,000	25 lbf/in. wd.	1:1	Thick Liquid	10,000	-65 to 350	ASTM E595	Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood	75045A8	000000
				2216	1.66 gal.	Can	90 min.	7 day	1,700	25 lbf/in. wd.	2:3	Thick Liquid	81,000	-65 to 350	ASTM E595, DOD-A-82720	Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood	75045A68	00000000


				J-B Weld







								Cold-Weld

								8265-S	2 fl. oz.	Tube	4 hr.	24 hr.	1,800	Not Rated	1:1	Paste	300,000	—	—	Masonry, Metal, Plastic, Rubber, Wood	7605A11	0000


								8281	10 fl. oz.	Tube	4 hr.	24 hr.	1,800	Not Rated	1:1	Paste	300,000	—	—	Masonry, Metal, Plastic, Rubber, Wood	7605A12	00000




										Original

										50165	0.85 fl. oz.	Syringe	4 hr.	24 hr.	1,800	Not Rated	1:1	Paste	150,000	—	—	Composite, Glass, Masonry, Metal, Plastic, Rubber	7605A4	0000

Epoxy Structural Adhesive Assortments

Keep a variety of epoxy adhesives on hand for a range of applications and materials. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.

Component Included		Each
General Purpose (Masonry, Metal, Plastic, Rubber) Nonsagging (Masonry, Metal, Wood) Slow-Set (Composite, Metal) Quick-Set (Masonry, Metal, Rubber) High Strength (Metal, Rubber) Waterproof (Composite, Masonry, Metal) Optically Clear (Glass, Metal) Machinable (Composite, Metal)	7538A16	000000

Machinable Epoxy Structural Adhesives

Stick

Restore cracked and hole-filled metal workpieces back to usable form with these epoxies. Once cured, you can drill precise holes, tap strong threads, and sand and file the adhesives to tight dimensions. They're steel filled for strength but won't rust.

Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Putty—Slice off a chunk and mold it into the shape you need.

					Strength
	Mfr. Model No.	Container Type	Begins to Harden, min.	Reaches Full Strength, min.	Shear, psi	Peel	Consistency	Viscosity	Temp. Range, ° F	For Joining		Each
J-B Weld







				SteelStik

				8267	Stick	5	60	900	Not Rated	Putty	Not Rated	-20 to 300	Composite, Masonry, Metal, Rubber	7605A2	00000

Optically Clear Epoxy Structural Adhesives


Cartridge	Syringe

For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.

Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.

		Container				Strength
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength	Shear, psi	Peel	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	For Joining		Each
J-B Weld







				ClearWeld

				50112	0.85	Syringe	5	60 min.	2,000	Not Rated	1:1	Thick Liquid	10,000	—	Metal, Plastic, Rubber, Wood	7605A18	00000


				Other Structural Adhesives



						—	1.69	Cartridge	30	36 hr.	2,450	Not Rated	2:1	Thick Liquid	4,000	-65 to 260	Ceramic, Composite, Glass, Metal, Plastic, Wood, Metal to Glass, Metal to Plastic, Plastic to Glass	7524A171	00000

Surface Fillers


Epoxy Mixer Cup	Epoxy Jar	Epoxy Syringe

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

Aluminum Liquid and Aluminum Putty—Devcon Aluminum Liquid and Devcon Aluminum Putty form a nonrusting finish.

		Container											Temp. Range, ° F
	Mfr. Model No.	Size, fl. oz.	Net Wt.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy



		EA 445	—	0.12 oz.	Mixer Cup	5	12 hr.	Thick Liquid	Yes	1:1	1 in² @ 1/4"	1/4"	Yes	-65	180	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood	10	7512A15	000000


		EA 445	—	1 oz.	Mixer Cup	5	12 hr.	Thick Liquid	Yes	1:1	1 in² @ 1/4"	1/4"	Yes	-65	180	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood	10	7512A16	000000
		EA 9131	—	0.12 oz.	Mixer Cup	90	24 hr.	Thick Liquid	Yes	1.5:1	1 in² @ 1/4"	1/4"	Yes	-65	180	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood	10	7512A14	00000


		Loctite® Fixmaster Poxy Pak™



				EA 9017	0.8	—	Syringe	5	60 min.	Thick Liquid	Yes	1:1	Not Rated	1/4"	Yes	-65	300	Clear	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Glass, Wood	1	7556A33	00000


				Devcon Aluminum Liquid



						10710	—	1 lb.	Jar	75	16 hr.	Thick Liquid	Yes	9:1	70 in² @ 1/4"	3/4"	Yes	-40	250	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	1	74575A74	000000


						10720	—	3 lb.	Jar	75	16 hr.	Thick Liquid	Yes	9:1	210 in² @ 1/4"	3/4"	Yes	-40	250	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	1	74575A75	000000


						Devcon Aluminum Putty



								10610	—	1 lb.	Jar	60	16 hr.	Putty	Yes	9:1	70 in² @ 1/4"	3/4"	Yes	-40	250	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	1	74575A72	000000


								10620	—	3 lb.	Jar	60	16 hr.	Putty	Yes	9:1	210 in² @ 1/4"	3/4"	Yes	-40	250	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	1	74575A73	000000

Waterproof Epoxy Structural Adhesives

Syringe

Even when used underwater, these adhesives maintain their strength. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.

These epoxies come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.

		Container				Strength
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Shear, psi	Peel	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	For Joining		Each
J-B Weld







				MarineWeld

				50172	0.85	Syringe	5	1	1,800	Not Rated	1:1	Paste	100,000	-20 to 300	Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood	7605A7	000000

Water-Resistant Surface Fillers


Epoxy Jar	Epoxy Can	Epoxy Can, Jar

Epoxy Tube	Epoxy Jar, Bottle	Epoxy Stick

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Putty—Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

Paste—Paste fillers resist alkalies, solvents, gasoline, and oil.

		Container													Temp. Range
	Mfr. Model No.	Size, fl. oz.	Net Wt., oz.	Type	Lg.	Begins to Harden, min.	Reaches Full Strength	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	Dia.	For Use Outdoors	Min.	Max., ° F	Color	Process After Hardening	For Use On		Each
Loctite® Fixmaster Underwater Repair Epoxy



		EA 9490	—	4	Stick	8"	15	60 min.	Putty	Yes	—	16 in² @ 1/4"	1/4"	1"	Yes	Not Rated	300	White	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Fiberglass, Wood	7531A13	000000


		Epoxy Surface Fillers



				—	2	—	Tube	—	5	60 min.	Paste	Yes	1:1	12 in² @ 1/4"	1/2"	—	Yes	Not Rated	200	Gray	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	7521A19	00000


				—	2	—	Jar, Bottle	—	20	24 hr.	Paste	Yes	5:1	8 1/2 in² @ 1/4"	1 1/2"	—	Yes	Not Rated	185	White	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	7521A15	00000
				—	2	—	Jar, Bottle	—	20	24 hr.	Paste	Yes	5:1	8 1/2 in² @ 1/4"	1 1/2"	—	Yes	Not Rated	250	Gray	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	7521A17	00000
				—	12	—	Jar	—	30	24 hr.	Paste	Yes	1:1	85 in² @ 1/4"	1"	—	Yes	50° F	210	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	7521A14	00000
				—	14	—	Can, Jar	—	20	24 hr.	Paste	Yes	5:1	62 in² @ 1/4"	1 1/2"	—	Yes	Not Rated	185	White	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	7521A16	00000
				—	14	—	Can, Jar	—	20	24 hr.	Paste	Yes	5:1	62 in² @ 1/4"	1 1/2"	—	Yes	Not Rated	250	Gray	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	7521A18	00000
				—	24	—	Can	—	30	24 hr.	Paste	Yes	1:1	170 in² @ 1/4"	1"	—	Yes	50° F	210	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	7521A12	00000
				—	48	—	Can	—	30	24 hr.	Paste	Yes	1:1	340 in² @ 1/4"	1"	—	Yes	50° F	210	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	7521A13	00000

Water-Resistant Surface Filler Kits

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

West System 105K

Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Filler Kits.

Includes	Formulation	Consistency	For Use Outdoors	Temp. Range, ° F	Process After Hardening	For Use On		Each
8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves	Epoxy	Thin Liquid	Yes	35 to 130	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, ABS, PVC, Fiberglass, Wood	7480A51	000000

Replacement Parts

			Container
Component	No. of Pieces	Mfr. Model No.	Size	Type	Lg.	Wd.		Each
Two-Part Epoxy	6	101-TS	0.6 fl. oz.	Single-Use Packet	—	—	7480A32	000000
Resin	1	105	1 qt.	Can	—	—	7480A41	00000
Fast Hardener	1	205	7 fl. oz.	Can	—	—	7480A42	00000
Slow Hardener	1	206	7 fl. oz.	Can	—	—	7480A43	00000
Colloidal Silica Filler	1	406	1.7 fl. oz.	Canister	—	—	7480A33	00000
Colloidal Silica Filler	1	406	5.5 fl. oz.	Canister	—	—	7480A44	00000
Low-Density Filler	1	410	5 fl. oz.	Canister	—	—	7480A48	00000
Mini Dispensing Pump	3	300	—	—	—	—	7480A45	00000
Fiberglass Cloth	1	745	—	—	30"	30"	7480A47	00000

Impact-Resistant Epoxy Structural Adhesives

Cartridge

Mixed with rubber for resilient bonds that withstand sudden stress, shock, and vibration better than standard epoxies. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.

Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.

		Container				Strength
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Shear, psi	Peel	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	For Joining		Each
Loctite®



		E-40FL	1.69	Cartridge	40	24	640	Not Rated	1:1	Thick Liquid	70,000	-25 to 250	Ceramic, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Glass, Rubber to Masonry, Wood to Glass	6430A26	000000


		E-40FL	6.76	Cartridge	40	24	640	Not Rated	1:1	Thick Liquid	70,000	-25 to 250	Ceramic, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Glass, Rubber to Masonry, Wood to Glass	1765A59	00000
		E-40FL	13.5	Cartridge	40	24	640	Not Rated	1:1	Thick Liquid	70,000	-25 to 250	Ceramic, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Glass, Rubber to Masonry, Wood to Glass	1765A58	000000
		E-90FL	1.69	Cartridge	90	24	810	Not Rated	1:1	Thick Liquid	40,000	-25 to 250	Ceramic, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Glass, Rubber to Masonry, Wood to Glass	6430A18	00000
		E-90FL	13.5	Cartridge	90	24	810	Not Rated	1:1	Thick Liquid	40,000	-25 to 250	Ceramic, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Glass, Rubber to Masonry, Wood to Glass	1765A56	000000


		Devcon







						Epoxy Plus 25

						14278	1.69	Cartridge	25	30	2,750	20 lbf/in. wd.	1:1	Thick Liquid	70,000	-40 to 200	Composite, Masonry, Metal, Plastic, Wood	66215A25	00000

Accessories for Structural Adhesives

		Each
Mixer Nozzle for 1.69 fl. oz. Loctite® and Devcon Cartridges	74695A12	00000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	74695A101	000000
Dispensing Gun for 1.69 fl. oz. Cartridges	74695A71	00000

Epoxy Structural Adhesives for Hard-to-Bond Materials


Bottle	Cartridge

Join polyethylene, polypropylene, and other plastics standard epoxies can't adhere to. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.

Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.

Container				Strength
Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Shear	Peel	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	For Joining		Each



	1.69	Cartridge	30	24	360 psi	Not Rated	2:1	Thick Liquid	9,000	-50 to 350	Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass	7513A1	000000


	1.69	Cartridge	90	72	Not Rated	Not Rated	1:1	Thick Liquid	6,000	-85 to 270	Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Glass, Plastic to Rubber, Rubber to Glass, Wood to Glass	7513A6	00000
	48	Bottle	30	24	360 psi	Not Rated	2:1	Thick Liquid	9,000	-50 to 350	Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass	7513A2	000000

Accessories for Structural Adhesives

Chalkboard Paint


Aerosol Can	Can

Create a washable writing surface.

Water Based—Layer a basecoat of magnetic paint with water-based chalkboard paint to create a magnetic chalkboard surface.

Cannot Be Sold To—Solvent-based chalkboard paint cannot be sold outside the United States due to product labeling restrictions.

	Container			Dry Time
	Size, qt.	Net Wt., oz.	Solution Type	Touch, min.	Overall	Approx. Coverage @ Thk.	Spray Position	Max. Temp., ° F	For Use Outdoors	For Use On	Color (Appearance)	Cannot Be Sold To		Each
Acrylic Plastic—Aerosol Can



		—	11	Solvent Based	20	24 hr.	7 ft² @ 1 mil	Upright	200	No	Steel, Iron, Glass, Plastic, Wood	Black (Flat)	Outside United States	7704T162	000000


		Acrylic Plastic—Can



				1	—	Water Based	30	120 min.	40 ft² @ 4 mil	—	90	No	Glass, Masonry, Concrete, Drywall, Wood, Metal, Plaster, Hardboard, Terra Cotta, Paperboard	Black (Flat)	—	8885T24	00000

Epoxy Protective Coatings

These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals. Coatings may chalk with exposure to sunlight. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Epoxy—Can

Image of Product. Front orientation. Protective Coatings. Epoxy Protective Coatings.

Safety Yellow—Safety-color coatings come in colors approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment. Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons.

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Choose a Color		Each



	1/2	Solvent Based	4	48	80 ft² @ 10 mil	Yes	1:1	2	250	50 to 100	Yes	Steel, Iron, Concrete, Wood	Gloss Gray, Gloss Green, Gloss Light Blue, Gloss Red, Gloss Safety Yellow, Gloss White	7829T1	000000


	1	Solvent Based	4	48	160 ft² @ 10 mil	Yes	1:1	2	250	50 to 100	Yes	Steel, Iron, Concrete, Wood	Gloss Gray, Gloss Green, Gloss Light Blue, Gloss Red, Gloss Safety Yellow, Gloss White	7829T3	00000

Primers

		Each
Primer (1 gal. Can)	7829T12	0000000

Light-Activated Surface Fillers

Epoxy

Bottle

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Epoxy—Epoxy fillers provide better adhesion and more corrosion resistance than polyester plastic fillers.

	Container										Temp. Range, ° F
	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, min.	Consistency	Mixing Req.	For Max. Crack Wd.	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Epoxy Surface Fillers



		3.5	Bottle	1	5	Putty	No	1"	24 in² @ 1/4"	1/2"	Yes	-40	270	Amber	Drill, Sand, Tap	Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	73475A14	000000

Low-Odor Epoxy Structural Adhesives


Cartridge	Syringe

Even in enclosed or poorly ventilated spaces, these epoxies form bonds without the noticeable odor other structural adhesives leave behind.

Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.

Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.

		Container				Strength
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Shear, psi	Peel, lbf/in. wd.	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	For Joining		Each
Lord



		363A/B	1.69	Cartridge	3	6	1,400	5	1:1	Thick Liquid	12,750	-30 to 300	Composite, Glass, Metal, Plastic, Rubber, Wood	66195A23	000000


		Other Structural Adhesives



				—	1.65	Syringe	4	24	2,200	18	1:1	Thick Liquid	15,000	-45 to 250	Metal, Plastic, Rubber, Wood	7541A84	00000

Accessories for Structural Adhesives

		Each
Mixer Nozzle for 1.69 fl. oz. Lord Cartridges	74695A127	00000
Dispensing Gun for 1.69 fl. oz. Cartridges	74695A71	00000

Surface Filler Patches

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

										Temp. Range, ° F
	Mfr. Model No.	Container Type	Lg.	Wd.	Begins to Harden, min.	Reaches Full Strength	Mixing Req.	Mix Ratio	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Devcon Zip Patch™



		11500	Patch	4"	9"	5	4 hr.	No	—	Yes	-40	200	Brown	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Fiberglass, Wood	7790A21	0000000


		Epoxy Surface Fillers



				—	Patch	4"	6"	1	30 min.	Yes	1:1	Yes	—	425	Clear	Sand	Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, SBR, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	74645A79	00000

Epoxy Structural Adhesives for Harsh Environments

Cartridge

With excellent resistance to corrosive chemicals, these epoxies maintain bonds in tough conditions.

Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Model Number 14415—Resist acids and oils.

Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.

Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.

	Mfr. Model		Container				Strength
	Name	No.	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, day	Shear, psi	Peel, lbf/in. wd.	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	Environment	For Joining		Each
Devcon



		HP 250	14415	13.5	Cartridge	65	7	3,200	35	2:1	Paste	105,000	-65 to 250	Corrosive, Harsh	Composite, Masonry, Metal, Plastic, Wood	66215A35	0000000

Accessories for Structural Adhesives

		Each
Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. Loctite® Cartridges	7451A61	00000
Dispensing Gun for 13.5 fl. oz. Cartridges	7451A52	000000

Antislip Protective Coatings

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Epoxy—Aerosol Can

		Dry Time
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Choose a Color		Each



	12	Solvent Based	20	24	15 ft² @ 1 mil	No	250	50 to 90	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Iron, Galvanized Iron, Galvanized Steel, Fiberglass, Masonry, Concrete, Stone, Asphalt, Wood	Gloss Black, Gloss Clear, Gloss Dark Gray, Gloss Red, Gloss Yellow	63825T74	000000

Covers

		Each
Roller Cover for Solvent-Based Coatings	6439T73	00000

Epoxy—Can

Apply gallon-sized solvent-based coatings with a notched trowel, sprayer, or a roller cover for thick coatings (sold separately).

		Dry Time
Container Size, gal.	Solution Type	Touch, hr.	Overall, day	Approx. Coverage, ft²	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	Specs. Met	For Use Outdoors	For Use On	Primer Req. for Use On	Choose a Color		Each



	1	Solvent Based	12	3	50	No	160	50 to 120	ASTM F609	Yes	Aluminum, Steel, Iron, Fiberglass, Concrete, Wood	Aluminum, Steel, Iron, Concrete, Wood	Flat Black, Flat Dark Gray, Flat Yellow	63045T36	0000000

Covers

		Each
Roller Cover for Solvent-Based Coatings	6439T73	00000

Low-Friction Epoxy Protective Coatings

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within. These thick coatings can also be used in chutes and on foundations for a smooth, glossy surface that resists abrasion, chemicals, and extreme temperatures once cured. Apply with a brush or roller. The size listed is the combined total of the two parts.

Epoxy—Can

Image of Product. Front orientation. Protective Coatings. Low-Friction Epoxy Protective Coatings.

				Dry Time, hr.
	Mfr. Model No.	Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, min.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each
Loctite® Nordbak Chemical Resistant Coating Coatings



		PC 7319	1 1/2	Solvent Based	4	16	150 ft² @ 10 mil	Yes	2.3:1	25	245	65 to 80	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Composite, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Gloss Gray	2493N1	0000000

Wood Surface Fillers

Fix damaged wood or build up and replace missing wood. These two-part fillers are nonshrinking and chemical resistant. At full strength, they can be sanded, painted, and varnished. The size listed is the combined total of the two parts.

	Container										Temp. Range, ° F
	Size	Type	Begins to Harden, hr.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Epoxy Surface Fillers



		12 fl. oz.	Jar	1	8	Putty	Yes	1:1	85 in² @ 1/4"	3/4"	Yes	0	200	Tan	Drill, Sand, Saw, Tap	Wood	6257T3	000000


		2 pt.	Jar	1	8	Putty	Yes	1:1	230 in² @ 1/4"	3/4"	Yes	0	200	White	Drill, Sand, Saw, Tap	Wood	6257T5	00000

Flame-Retardant Protective Coatings

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Epoxy—Can

Image of Product. Front orientation. Protective Coatings. Flame-Retardant Protective Coatings.

Clear—Clear coatings are frequently used on wood—use one coat on sealed wood and two on unsealed. They can be used outside without breaking down, but prolonged exposure to UV light may cause them to yellow.

White—White coatings are frequently used on walls, ceilings, doors, and stairwells.

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Flammability Rating	For Use Outdoors	For Use On	Color		Each



	1	Water Based	8	48	150 ft² @ 10 mil	Yes	100:26	2.5	250	40 to 100	UL 94 V-0	Yes	Aluminum, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composite, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Gloss Clear	2557N2	0000000


	1	Water Based	8	48	150 ft² @ 10 mil	Yes	100:20	2.5	300	40 to 100	UL 94 V-0	Yes	Aluminum, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composite, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	Gloss White	2557N1	000000

Paint for Metal

Can

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading. Scrape rusty areas clean before application. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life and corrosion resistance of paint.

Acrylic Plastic—Acrylic plastic paint is water-based and can be cleaned up with soap and water. It’s also known as latex paint.

1 gal. Container—Apply paint in a one-gallon can with a brush, roller, or sprayer.

Safety Blue—Safety blue is used on “out of order,” “employees only,” and other general-information signs. Safety-color paint colors are approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment.

Safety Green—Safety green indicates general safety and is often used to identify first aid kits and other medical equipment and to explain safety procedures. Safety-color paint colors are approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment.

Safety Orange—Safety orange indicates hazards and is often used on warning signs, construction equipment, and unguarded edges. Safety-color paint colors are approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment.

Safety Red—Safety red indicates danger and is often used on fire protection equipment, containers for flammable liquid, and switches on machinery. Safety-color paint colors are approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment.

Safety Yellow—Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons. Safety-color paint colors are approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment.

	Paint											Primers
			Dry Time
	Container Size, gal.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Max. Temp., ° F	For Use Outdoors	For Use On	Choose a Color (Appearance)		Each	Color		Each
Acrylic Plastic—Can



		1	Water Based	30	4	270 ft² @ 2 mil	120	Yes	Aluminum, Steel, Iron, Galvanized Iron, Galvanized Steel, Masonry, Concrete, Wood	Black (Flat), Black (Gloss), Dark Gray (Gloss), Light Gray (Gloss), Safety Blue (Gloss), Safety Green (Gloss), Safety Red (Gloss), Safety Yellow (Gloss), Safety Orange (Gloss), White (Gloss)	7907T1	000000	Gray	7907T3	000000

Heavy Duty Vehicle-Grade Antislip Protective Coatings

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction. Apply with a roller. The resin and hardener come in separate containers that can be mixed in the pail. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Epoxy—Can

		Dry Time
Container Size, gal.	Solution Type	Touch, hr.	Overall, day	Approx. Coverage @ Thk.	Mixing Req.	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Mil. Spec.	For Use Outdoors	For Use On	Primer Req. for Use On	Color	Cannot Be Sold To		Each



	1	Solvent Based	24	4	25 ft² @ 2 mil	Yes	8	160	40 to 100	MIL-PRF-24667 Type II Composition G, MIL-PRF-24667 Type IV Composition G	Yes	Aluminum, Steel, Iron, Concrete, Wood	Aluminum, Steel, Iron, Concrete, Wood	Flat Dark Gray	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	6506T51	0000000

Epoxy—Pail

MIL-PRF-24667 Type I Composition G—Coatings that meet MIL-PRF 24667 Type 1 are our most wear and impact resistant. They can also be applied with a notched trowel.

		Dry Time
Container Size, gal.	Solution Type	Touch, hr.	Overall, day	Approx. Coverage @ Thk.	Mixing Req.	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Mil. Spec.	For Use Outdoors	For Use On	Primer Req. for Use On	Color	Cannot Be Sold To		Each



	5	Solvent Based	24	4	125 ft² @ 2 mil	Yes	4	160	40 to 100	MIL-PRF-24667 Type I Composition G, MIL-PRF-24667 Type II Composition G	Yes	Aluminum, Steel, Iron, Concrete, Wood	Aluminum, Steel, Iron, Concrete, Wood	Flat Dark Gray	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	6506T55	0000000


	5	Solvent Based	24	4	125 ft² @ 2 mil	Yes	8	160	40 to 100	MIL-PRF-24667 Type II Composition G, MIL-PRF-24667 Type IV Composition G	Yes	Aluminum, Steel, Iron, Concrete, Wood	Aluminum, Steel, Iron, Concrete, Wood	Flat Dark Gray	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	6506T53	000000

Vehicle-Grade Antislip Protective Coatings

Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface. Apply with a notched trowel, roller, or sprayer. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Epoxy—Can

		Dry Time
Container Size, gal.	Solution Type	Touch, hr.	Overall, day	Approx. Coverage @ Thk.	Mixing Req.	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Specs. Met	For Use Outdoors	For Use On	Cannot Be Sold To	Choose a Color		Each



	1	Solvent Based	12	3	40 ft² @ 2 mil	Yes	4	160	50 to 130	ADA Compliant, ASTM F609	Yes	Aluminum, Steel, Iron, Fiberglass, Concrete, Wood	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	Flat Black, Flat Dark Gray	7887T21	0000000

Epoxy—Pail

Coatings in a pail have a resin and a hardener in separate containers that can be mixed in the pail.

		Dry Time
Container Size, gal.	Solution Type	Touch, hr.	Overall, day	Approx. Coverage @ Thk.	Mixing Req.	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Specs. Met	For Use Outdoors	For Use On	Cannot Be Sold To	Choose a Color		Each



	5	Solvent Based	12	3	200 ft² @ 2 mil	Yes	4	160	50 to 130	ADA Compliant, ASTM F609	Yes	Aluminum, Steel, Iron, Fiberglass, Concrete, Wood	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	Flat Black, Flat Dark Gray	7887T22	0000000

Paint for Drywall

This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices. Apply with a brush, roller, or sprayer.

			Dry Time
	Container Size, gal.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Max. Temp., ° F	For Use Outdoors	For Use On	Choose a Color (Appearance)		Each
Acrylic Plastic—Can



		1	Water Based	30	4	240 ft² @ 2 mil	200	Yes	Steel, Masonry, Concrete, Drywall, Wood	Black (Gloss), Blue (Gloss), Gray (Gloss), Red (Gloss), White (Gloss), Yellow (Gloss)	7709T1	000000

Drip-Free Paint for Metal

This acrylic plastic paint produces a thick, durable finish that won’t run or drip as it dries. For best results, use a primer with new or rusted metal and with new wood.

			Dry Time, min.									Each
	Container Net Wt., oz.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Spray Position	Max. Temp., ° F	For Use Outdoors	For Use On	Choose a Color (Appearance)		1-5	6-Up
Acrylic Plastic—Aerosol Can



		12	Water Based	12	30	15 ft² @ 1 mil	Upright	150	Yes	Aluminum, Steel, Iron, Wood	Black (Flat), Black (Gloss), Blue (Gloss), Dark Gray (Gloss), Light Gray (Gloss), Red (Gloss), White (Gloss), Yellow (Gloss)	2590N1	000000	000000

Low-Odor Vehicle-Grade Antislip Protective Coatings

These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction for pedestrian, cart, and hand-truck traffic. Apply with a roller. The size listed is the combined total of the two parts.

Epoxy—Can

Image of Product. Front orientation. Protective Coatings. Low-Odor Vehicle-Grade Antislip Protective Coatings.

Solution Type	Overall Dry Time, hr.	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, min.	Max. Temp., ° F	Application Temp. Range, ° F	Specs. Met	For Use Outdoors	For Use On	Choose a Color		Each



1/2	Water Based	48	25 ft² @ 30 mil	Yes	3:1	45	300	50 to 100	ADA Compliant, ASTM D3960	Yes	Aluminum, Steel, Iron, Concrete, Wood	Semi-Gloss Black, Semi-Gloss Gray, Semi-Gloss Red, Semi-Gloss Yellow	6454T31	000000


1	Water Based	48	50 ft² @ 30 mil	Yes	3:1	45	300	50 to 100	ADA Compliant, ASTM D3960	Yes	Aluminum, Steel, Iron, Concrete, Wood	Semi-Gloss Black, Semi-Gloss Gray, Semi-Gloss Red, Semi-Gloss Yellow	6454T32	000000

Rough-Texture Paint

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

			Dry Time									Each
	Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Spray Position	Max. Temp., ° F	For Use Outdoors	For Use On	Choose a Color (Appearance)		1-5	6-Up
Acrylic Plastic—Aerosol Can



		12	Solvent Based	15	48	10 ft² @ 1 mil	Upright	200	Yes	Steel, Iron, Masonry, Concrete, Wood	Black (Flat), White (Flat)	7739T6	000000	000000

Paint

Enhance, renew, and protect surfaces.

Solvent Based—Solvent-based paint keeps its color longer than water-based paint when used outdoors.

Metallic Aluminum and Metallic Silver—Metallic paint is often used on machinery, piping systems, and equipment.

	Paint													Primers
			Dry Time									Each
	Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Spray Position	Max. Temp., ° F	For Use Outdoors	For Use On	Choose a Color (Appearance)		1-5	6-Up	Color		Each
Acrylic Plastic—Aerosol Can



		11	Solvent Based	15	2	20 ft² @ 1 mil	Upright	85	No	Steel, Iron, Masonry, Concrete, Wood	Metallic Aluminum (Gloss), Metallic Silver (Gloss)	7596T5	000000	000000	Gray	7659T4	000000