McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    251 Products

    Static Control Mats

    Image of Product. Front orientation. Static Control Mats. Static Control Mats.
    Control static electricity on work surfaces—mats transfer static charges from the top of the surface to the ground.
    Blue
    Gray
    Lg.
    Wd.
    Thk.
    Surface Resistivity,
    ohm/sq.
    Material
    Includes
    Each
    Each
    24"24"1/8"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T1010000006980T109000000
    30"20"1/16"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T16000006980T3100000
    30"24"1/8"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T102000006980T12800000
    36"24"1/16"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T170000006980T32000000
    36"36"1/8"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T1030000006980T111000000
    48"24"1/16"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T6000000———0
    48"24"1/8"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap———06980T112000000
    48"30"1/16"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T180000006980T33000000
    48"36"1/8"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T1040000006980T113000000
    60"24"1/8"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T1050000006980T114000000
    60"30"1/16"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T190000006980T34000000
    60"36"1/8"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T1060000006980T115000000
    72"24"1/8"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T1070000006980T116000000
    72"30"1/16"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T210000006980T35000000
    72"36"1/8"1× 10^9Vinyl PlasticGrounding Cord, Grounding Snap, Wrist Strap6980T1080000006980T117000000
    40 ft.24"1/16"1× 10^9Vinyl PlasticSix 15-ft. Grounding Cords, Six Grounding Snaps, Six Quick-Release Heel Straps6980T8000000———0

    Reversible Static Control Mats

    Image of Product. Front orientation. Static Control Mats. Reversible Static Control Mats.
    Place either side of these mats against your work surface. They control static electricity on work surfaces by transferring the static charges from the top of the surface to the ground.
    Blue
    Gray
    Lg.
    Wd.
    Thk.
    Surface Resistivity,
    ohm/sq.
    Material
    Includes
    Each
    Each
    36"24"1/16"1× 10^6Buna-N
    		Grounding Cord, Grounding Snap, Wrist Strap———04446T710000000
    48"24"1/16"1× 10^6Buna-N
    		Grounding Cord, Grounding Snap, Wrist Strap4446T740000000———0

    Replaceable-Tip Tweezers Sets

    Image of Product. Front orientation. Tweezers. Replaceable-Tip Tweezers Sets.
    Image of Specification. Standard Round Tips. Front orientation. ZoomedIn view. Tweezers. Replaceable-Tip Tweezers Sets.

    Standard Round Tips

    Image of Specification. Standard Pointed Tips. Front orientation. ZoomedIn view. Tweezers. Replaceable-Tip Tweezers Sets.

    Standard Pointed Tips

    These assorted tweezers have tips that can be replaced when they become worn. Tips are carbon fiber, which insulates against heat and won’t nick or scratch components. They also drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. The body of the tool is 300 series stainless steel, which has excellent corrosion resistance. Commonly known as anti-magnetic tweezers, they are typically nonmagnetic but may become slightly magnetic with use.
    No. of
    Pieces
    Includes
    Max. Temp.,
    ° F
    Jaw
    Texture
    Grip
    Style
    Appearance
    Surface Resistivity,
    ohm/sq.
    Performance
    Container
    Type
    Each
    300 Series Stainless Steel
    45" O'all Lg. Tweezers with 0.012" Wd. × 0.008" Thick. Pointed Tips
    5" O'all Lg. Tweezers with 0.020" Wd. × 0.015" Thick. Pointed Tips
    5" O'all Lg. Tweezers with 0.040" Wd. × 0.038" Thick. Pointed Tips
    5" O'all Lg. Tweezers with 0.060" Wd. × 0.015" Thick. Round Tips    		245SmoothPlainDull1× 10^2Conductive, Heat Resistant, Replaceable Tip, Static ControlPlastic Case6182A250000000
     
    Replacement Tips
    Pkg.
    Qty.
    Pkg.
    0.012" Wide Pointed Carbon Fiber Tips26182A3100000
    0.020" Wide Pointed Carbon Fiber Tips26182A320000
    0.040" Wide Pointed Carbon Fiber Tips26182A330000
    0.060" Wide Round Carbon Fiber Tips26182A340000

    Static-Control Wire Cutter Sets

    Image of Product. Front orientation. Wire Cutters. Static-Control Wire Cutter Sets.
    Image of Attribute. Front orientation. ZoomedIn view. Contains Annotated. Static-Control Wire Cutter Sets.
    Image of Specification. Side1 orientation. ZoomedIn view. Contains Border. Oval Head. Static-Control Wire Cutter Sets.
    Image of Specification. Side1 orientation. ZoomedIn view. Contains Border. Tapered Head. Static-Control Wire Cutter Sets.

    Oval Head

    Tapered Head

    Image of Specification. Side1 orientation. ZoomedIn view. Contains Border. Reduced Head. Static-Control Wire Cutter Sets.
    Image of Specification. Wire with Flush Cut Profile. Side1 orientation. Flush.

    Reduced Head

    Wire with Flush

    Cut Profile

    The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. These tools produce a flush cut with virtually no pinch at the tip of the wire, creating clean connections for easy soldering. The spring-assisted jaws open automatically when you release the handles. Also known as diagonal-cutting pliers.
    Oval Head—Oval-head cutters stay sharp longer than tapered-head cutters.
    Tapered Head—Tapered-head cutters fit more easily in tight spaces than oval-head cutters, but they dull more quickly.
    No. of
    Pieces
    Includes
    For Wire
    Type
    Performance
    Material
    Head Shape
    Cut
    Profile
    Head Offset
    Angle
    Relative
    Head Thk.
    Each
    Cushion Grip
    44" Lg. Oval-Head Side-Cutting Wire Cutter with 7/16" Lg. Jaw for Max. 18-ga. (0.040" Dia.) Wire
    4" Lg. Tapered-Head Side-Cutting Wire Cutter with 7/16" Lg. Jaw for Max. 20-ga. (0.032" Dia.) Wire
    4" Lg. Tapered-Head Side-Cutting Wire Cutter with 7/16" Lg. Jaw and 29° Offset Angle for Max. 20-ga. (0.032" Dia.) Wire
    4" Lg. Reduced Tapered-Head Side-Cutting Wire Cutter with 1/2" Lg. Jaw for Max. 20-ga. (0.032" Dia.) Wire    		SoftAntistatic, Static ControlSteelOval, TaperFlush29°Reduced3817A210000000
     

    Precise-Control Pliers Sets

    Image of Product. Front orientation. Pliers Sets. Precise-Control Pliers Sets.
    Smooth, consistent movement ensures precision. These assorted pliers have slip-resistant ultra grips that are shaped to fit comfortably in your hand and reduce strain in repetitive tasks. The grips are also static dissipative, draining static away from your application to prevent electrostatic discharge (ESD) that can damage sensitive equipment. Spring-assisted jaws open automatically when you release the handles.
    No. of
    Pieces
    Includes
    Material
    Performance
    Container
    Type
    Each
    Ultra Grip with Spring-Assisted Jaws
    65" Lg. Long-Nose Pliers
    5" Lg. Wide-Tipped Long-Nose Pliers
    5 1/2" Lg. Tight-Clearance Long-Nose Pliers
    5 1/2" Lg. Bent-Nose Pliers
    5 1/2" Lg. Wire-Forming Pliers
    4 3/4" Lg. Wire Cutter    		SteelPrecise Control, Static Control, Static DissipativeFabric Case2972N70000000
     

    Static-Control Pliers Sets

    Image of Product. Front orientation. Pliers Sets. Static-Control Pliers Sets.
    The plastic grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. These sets contain an assortment of pliers with spring-assisted jaws that open automatically when you release the handles.
    No. of
    Pieces
    Includes
    Material
    Surface Resistivity,
    ohm/sq.
    Performance
    Container Type
    Each
    Cushion Grip with Spring-Assisted Jaws
    64 1/2" Lg. Long-Nose Pliers
    5 3/4" Lg. Long-Nose Pliers
    4 3/4" Lg. Long-Nose Pliers with Wire Cutter
    4 3/4" Lg. Wide-Tipped Long-Nose Pliers
    4 1/4" Lg. Wire Cutter
    4 1/2" Lg. Wire End Cutter    		Steel5.4 × 10^9Antistatic, Static ControlPlastic Pouch with Zipper Closure5460A550000000
     

    Single-Channel Soldering Stations

    Compact and portable, these stations are best for repetitive soldering tasks that only require one tool. They give you complete control over the temperature, since you can adjust the temperature as you go. To protect sensitive components, they don’t create ESD (electrostatic discharge). Choose your station based on the wattage of the iron. Irons with lower wattages are best for work on parts that require precision and high heating efficiency, such as delicate electronic components. Irons with higher wattages are best for heavy parts and thick wires that require large solder joints.
    Add different shaped and sized tips depending on the components you're soldering. The smaller the point width, the smaller the solder joint. For example, use a tip with a point width of 1/64” for soldering extra-small electronics under a microscope. For heavy duty soldering and large components, a tip with a point width of 1/8” works better.
    Weller WE Series Stations
    Image of Product. Front orientation. Soldering and Desoldering Stations. Single-Channel Soldering Stations, WE Series.
    Image of Specification. Display. Front orientation. ZoomedIn view. Contains Border. Soldering and Desoldering Stations. Single-Channel Soldering Stations, WE Series.

    Display

    Image of Specification. Screwdriver Tip. Front orientation. Screwdriver. Single-Channel Soldering Stations, WE Series.

    Screwdriver

    Tip

    Tip (Plug
    Connection)
    Electrical
    No. of
    Channels
    Station
    Type
    Iron
    Wattage
    Temp. Range,
    ° F
    Wattage,
    W
    Shape
    Point
    Wd.
    Tip
    Connection
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Certification
    Each
    Model Number WE1010NA
     
    120V AC
    1Soldering70 W200 to 85085Screwdriver1/16"PlugContinuous2863Plug InOne Tip
    One Soldering Iron
    One Sponge
    One Soldering Iron Stand    		UL Listed
    		7734A440000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Single-Channel Soldering Stations, Weller.
    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    For Station
    Type
    Tip Shape
    Point
    Wd.
    Tip
    Connection
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    WEWEP7070200 to 850SolderingScrewdriver1/16"PlugETContinuous28Foam24One Tip7734A15000000
    Replacement Stands
    Image of Product. Front orientation. Soldering and Desoldering Iron Stands. Single-Channel Soldering Stations.
    For Iron
    Manufacturer
    Model No.
    Wattage,
    W
    Mfr. Model
    No.
    Includes
    Each
    WEP7070PH 70One Sponge7724A361000000
    Tips
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Chisel.
    Image of Product. Conical. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Conical.
    Image of Product. Round. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Round.
    Image of Product. Single Flat. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Single Flat.

    Chisel

    Conical

    Round

    Single Flat

    For Iron
    Mfr. Model No.
    Mfr. Model
    No.
    Tip Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    ET Series
    WEP70ETAChisel8501 3/8"1/16"PlugSolderingWE7008A4100000
    WEP70ETAASingle Flat8501 3/8"1/16"PlugSolderingWE7008A1280000
    WEP70ETBChisel8501 3/8"3/32"PlugSolderingWE7008A420000
    WEP70ETCChisel8501 3/8"1/8"PlugSolderingWE7008A430000
    WEP70ETDChisel8501 3/8"3/16"PlugSolderingWE7008A1110000
    WEP70ETHConical8501 3/8"1/32"PlugSolderingWE7008A450000
    WEP70ETJConical8501 3/4"1/32"PlugSolderingWE7008A1120000
    WEP70ETLChisel8501 3/4"5/64"PlugSolderingWE7008A470000
    WEP70ETMChisel8501 3/4"1/8"PlugSolderingWE7008A1140000
    WEP70ETOConical8501 3/4"1/32"PlugSolderingWE7008A440000
    WEP70ETPRound8501 3/8"1/32"PlugSolderingWE7008A920000
    WEP70ETRChisel8501 3/8"1/16"PlugSolderingWE7008A480000
    WEP70ETSConical8501 3/4"1/64"PlugSolderingWE7008A490000
    WEP70ETTConical8501 3/8"1/64"PlugSolderingWE7008A510000
    WEP70ETUSingle Flat8501 1/2"1/64"PlugSolderingWE7008A1160000
    WEP70ETVSingle Flat8501 1/2"1/32"PlugSolderingWE7008A1180000
     
    Weller WT1 Series Stations
    Image of Product. Front orientation. Soldering and Desoldering Stations. Single-Channel Soldering Stations, WT1 Series.
    Image of Specification. Display. Front orientation. ZoomedIn view. Contains Border. Soldering and Desoldering Stations. Single-Channel Soldering Stations, WT1 Series.

    Display

    Image of Specification. Chisel Tip. Front orientation. Chisel. Single-Channel Soldering Stations, WT1 Series.

    Chisel Tip

    Tip (Plug
    Connection)
    Electrical
    No. of
    Channels
    Station
    Type
    Iron
    Wattage
    Temp. Range,
    ° F
    Wattage,
    W
    Shape
    Point
    Wd.
    Tip
    Connection
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Each
    Model Number WT1010
     
    120V AC
    1Soldering90 W150 to 85095Chisel3/32"PlugContinuous1063Plug InOne Tip
    One Soldering Iron
    One Sponge
    One Scouring Scrubber
    One Soldering Iron Stand    		7724A1110000000
     
    Model Number WT1011
     
    120V AC
    1Soldering65 W150 to 85095Chisel1/16"PlugContinuous1063Plug InOne Tip
    One Soldering Iron
    One Sponge
    One Scouring Scrubber
    One Soldering Iron Stand    		7724A114000000
     
    Model Number WT1013
     
    120V AC
    1Soldering80 W150 to 85095Chisel3/32"PlugContinuous1063Plug InOne Tip
    One Soldering Iron
    One Sponge
    One Scouring Scrubber
    One Soldering Iron Stand    		7724A25000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Single-Channel Soldering Stations, Weller.
    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    For Station
    Type
    Tip
    Shape
    Point
    Wd.
    Tip
    Connection
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    WR2, WR3M, WT1, WT1H, WT2MWP6565150 to 850SolderingChisel1/16"PlugXNTContinuous10Plastic24One Tip7724A1150000000
    WR2, WR3M, WT1, WT1H, WT2MWP8080150 to 850SolderingChisel3/32"PlugLTContinuous10Rubber
    		24One Tip7724A527000000
    WR2, WR3M, WT1, WT1H, WT2MWSP8080200 to 840SolderingChisel1/16"PlugLTContinuous45Rubber
    		24One Tip7734A34000000
    WR3M, WT1, WT1H, WT2MWTP9090200 to 850SolderingChisel1/16"PlugXNTContinuous10Rubber
    		24One Tip7724A112000000
    Replacement Stands
    Image of Product. Front orientation. Soldering and Desoldering Iron Stands. Single-Channel Soldering Stations.
    For Iron
    Manufacturer Model No.
    Wattage, W
    Mfr. Model
    No.
    Includes
    Each
    WP65, WSP80, WXP65, WXP12065, 80, 120WDH 10One Scouring Scrubber7724A4610000000
    WP65, WP80, WP12065, 80, 120WDH 10TOne Scouring Scrubber4869N25000000
    WP65, WSP80, WXP65, WXP12065, 80, 120WSR 201One Scouring Scrubber, One Sponge7724A768000000
    WTP9090WSR 200One Scouring Scrubber, One Sponge7724A113000000
    Tips
    Image of Product. Bevel. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Bevel.
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Chisel.
    Image of Product. Conical. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Conical.
    Image of Product. Gullwing. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Gullwing.

    Bevel

    Chisel

    Conical

    Gullwing

    Image of Product. Knife. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Knife.
    Image of Product. Round. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Round.
    Image of Product. 30° Round. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, 30° Round.
    Image of Product. 45° Knife. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, 45° Knife.

    Knife

    Round

    30° Round

    45° Knife

    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Tip Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    LT Series
    WP80, WSP801LConical8501 1/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A12800000
    WP80, WSP801SARound85019/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14200000
    WP80, WSP801SLX30° Round85055/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13400000
    WP80, WSP804Bevel85019/32"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13600000
    WP80, WSP8022CPBevel85025/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1290000
    WP80, WSP8033CPBevel85025/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13100000
    WP80, WSP80BBBevel85021/32"3/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13700000
    WP80, WSP80CC 60Bevel85021/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13800000
    WP80, WSP80DD 45Bevel85025/32"5/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13900000
    WP80, WSP80FBevel85033/64"15/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1320000
    WP80, WSP80GW1Gullwing85045/64"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1330000
    WP80, WSP80GW2Gullwing85045/64"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14500000
    WP80, WSP80KNKnife85021/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14100000
    WP80, WSP80KNSL45° Knife85021/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14400000
    WP80, WSP80LT1SRound8505/8"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A340000
    WP80, WSP80LTAChisel8503/8"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A540000
    WP80, WSP80LTASRound8503/8"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A510000
    WP80, WSP80LTBChisel8501/2"3/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A520000
    WP80, WSP80LTCChisel8501/2"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A550000
    WP80, WSP80LTCSRound8501/2"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A530000
    WP80, WSP80LTDChisel8501/2"3/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1190000
    WP80, WSP80LTKChisel85013/16"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1220000
    WP80, WSP80LTLChisel85013/16"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1240000
    WP80, WSP80LTSRound85013/16"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1260000
     
    XNT Series
    WP65, WTP90, WXP651LXRound8501 43/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51700000
    WP65, WTP90, WXP651SCNWChisel8501 1/16"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51900000
    WP65, WTP90, WXP651XRound8501 7/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51200000
    WP65, WTP90, WXP65AXChisel8501 7/64"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51100000
    WP65, WTP90, WXP65HX30° Chisel8501 7/16"1/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51800000
    WP65, WTP90, WXP65LChisel8501 15/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51300000
    WP65, WTP90, WXP65SConical8501 15/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51400000
     
    Weller WT1H Series Stations
    Image of Product. Front orientation. Soldering and Desoldering Stations. Single-Channel Soldering Stations, WT1H Series.
    Image of Specification. Display. Front orientation. ZoomedIn view. Contains Border. Soldering and Desoldering Stations. Single-Channel Soldering Stations, WT1H Series.

    Display

    Image of Specification. Chisel Tip. Front orientation. Chisel. Single-Channel Soldering Stations, WT1H Series.

    Chisel Tip

    Tip (Plug
    Connection)
    Electrical
    No. of
    Channels
    Station
    Type
    Iron
    Wattage
    Temp. Range,
    ° F
    Wattage,
    W
    Shape
    Point
    Wd.
    Tip
    Connection
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Each
    Model Number WT1010H
     
    120V AC
    1Soldering120 W150 to 950150Chisel3/32"PlugContinuous6063Plug InOne Iron
    One Tip
    One Sponge
    One Scouring Scrubber
    One Stand    		7724A130000000
     
    Model Number WT1011H
     
    120V AC
    1Soldering200 W150 to 950150Chisel13/64"PlugContinuous6063Plug InOne Iron
    One Tip
    One Sponge
    One Scouring Scrubber
    One Stand    		7724A14000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Single-Channel Soldering Stations, Weller.
    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    For Station
    Type
    Tip
    Shape
    Point
    Wd.
    Tip
    Connection
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    WR2, WR3M, WT1, WT1H, WT2MWP6565150 to 850SolderingChisel1/16"PlugXNTContinuous10Plastic24One Tip7724A1150000000
    WR2, WR3M, WT1, WT1H, WT2MWP8080150 to 850SolderingChisel3/32"PlugLTContinuous10Rubber
    		24One Tip7724A527000000
    WR2, WR3M, WT1H, WT2MWP120120150 to 845SolderingChisel1/16"PlugXTContinuous14Rubber
    		24One Tip7734A36000000
    WR2, WT1H, WT2MWP200200360 to 850SolderingChisel13/64"PlugXHTContinuous45Plastic24One Tip7734A37000000
    WR2, WR3M, WT1, WT1H, WT2MWSP8080200 to 840SolderingChisel1/16"PlugLTContinuous45Rubber
    		24One Tip7734A34000000
    WR3M, WT1, WT1H, WT2MWTP9090200 to 850SolderingChisel1/16"PlugXNTContinuous10Rubber
    		24One Tip7724A112000000
    Replacement Stands
    Image of Product. Front orientation. Soldering and Desoldering Iron Stands. Single-Channel Soldering Stations.
    For Iron
    Manufacturer Model No.
    Wattage, W
    Mfr. Model
    No.
    Includes
    Each
    WP65, WSP80, WXP65, WXP12065, 80, 120WDH 10One Scouring Scrubber7724A4610000000
    WP65, WP80, WP12065, 80, 120WDH 10TOne Scouring Scrubber4869N25000000
    WP65, WSP80, WXP65, WXP12065, 80, 120WSR 201One Scouring Scrubber, One Sponge7724A768000000
    WP200200WSR 202One Scouring Scrubber, One Sponge7724A15000000
    WTP9090WSR 200One Scouring Scrubber, One Sponge7724A113000000
    Tips
    Image of Product. Bevel. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Bevel.
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Chisel.
    Image of Product. Gullwing. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Gullwing.
    Image of Product. Knife. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Knife.
    Image of Product. Round. Front orientation. Soldering Iron Tips. Single-Channel Soldering Stations, Round.

    Bevel

    Chisel

    Gullwing

    Knife

    Round

    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Tip Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    XHT Series
    WP200XHT CChisel8501 7/8"1/8"PlugSolderingWR2, WT1H, WT2M5793N31000000
    WP200XHT DChisel8501 7/8"13/64"PlugSolderingWR2, WT1H, WT2M5793N2900000
    WP200XHT EChisel8501 7/8"19/64"PlugSolderingWR2, WT1H, WT2M5793N3200000
    WP200XHT FChisel8501 7/8"3/8"PlugSolderingWR2, WT1H, WT2M5793N3300000
     
    XT Series
    WP120, WXP120AA 60Bevel8501 29/64"1/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52200000
    WP120, WXP120BB 45Bevel8501 29/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52300000
    WP120, WXP120BSRound8501 29/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52800000
    WP120, WXP120BSCChisel8501 27/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53800000
    WP120, WXP120BSLChisel8501 27/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53900000
    WP120, WXP120BX30° Chisel8501 13/32"5/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54200000
    WP120, WXP120CC 45Bevel8501 29/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52400000
    WP120, WXP120CSRound8501 29/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52900000
    WP120, WXP120CSLChisel8501 27/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54100000
    WP120, WXP120D 4545° Chisel8501 29/64"1/4"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53300000
    WP120, WXP120DLChisel8501 37/64"3/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53600000
    WP120, WXP120DSRound8501 3/8"3/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53100000
    WP120, WXP120F 30Bevel8501 29/64"3/64"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53200000
    WP120, WXP120GW1Gullwing8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52600000
    WP120, WXP120GW2Gullwing8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53500000
    WP120, WXP120HChisel8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52700000
    WP120, WXP120HXChisel8501 1/2"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53700000
    WP120, WXP120KNKnife8501 49/64"5/64"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52500000
    WP120, WXP120MXChisel8501 1/2"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54300000
     

    Multichannel Soldering and Desoldering Stations

    Switch between different soldering and desoldering tools quickly—these stations have either two or three channels to plug in multiple tools so they're ready to go. You can adjust the temperature for the best results. To protect sensitive components, they don’t create ESD (electrostatic discharge). Additional tips and nozzles are sold separately.
    Choose a station that’s compatible with your soldering or desoldering iron. Each station includes a variety of tools to solder, desolder, or both—determine if the included tools work for your application.
    Add different shaped and sized tips depending on the components you're soldering. The smaller the point width, the smaller the solder joint. For example, use a tip with a point width of 1/64” for soldering extra-small electronics under a microscope. For heavy duty soldering and large components, a tip with a point width of 1/8” works better.
    Metcal CV Series Stations
    Image of Product. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, CV Series.
    Image of Specification. Display. Front orientation. ZoomedIn view. Contains Border. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, CV Series.

    Display

    Image of Specification. Conical Tip. Front orientation. ZoomedIn view. Conical. Multichannel Soldering and Desoldering Stations, CV Series.

    Conical Tip

    Metcal CV stations evaluate the thickness and stability of the solder. An LED ring lights up when a reliable solder joint is complete.
    Fixed-temperature tips require you to change out the tip if you need to adjust the temperature.
    Tip (Plug
    Connection)
    Electrical
    No. of
    Channels
    Station
    Type
    Iron
    Wattage
    Temp. Range,
    ° F
    Wattage,
    W
    Shape
    Point
    Wd.
    Tip
    Connection
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Each
    Model Number CV-510
     
    120V AC
    2Soldering80 W580 to 95040Conical1/64"PlugContinuous2063Plug In875°F Fixed-Temperature Soldering Tip
    One Soldering Iron
    One Sponge
    One Scouring Scrubber
    One Soldering Iron Stand    		4869N380000000
     
    Model Number CV-5210
     
    120V AC
    2Soldering80 W580 to 95080Conical1/64"PlugContinuous1563Plug In875°F Fixed-Temperature Soldering Tip
    One Soldering Iron
    One Sponge
    One Scouring Scrubber
    One Soldering Iron Stand    		4869N3900000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Metcal, For Soldering Stations.
    Image of Specification. Conical Tip. Front orientation. ZoomedIn view. Soldering Irons. Multichannel Soldering and Desoldering Stations, Metcal, For Soldering Stations, Conical Tip.

    For Soldering Stations

    Conical Tip

    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    For Station
    Type
    Tip
    Shape
    Point
    Wd.
    Tip
    Connection
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    CVCV-H1-AV80580 to 950SolderingConical1/64"PlugCVCContinuous15Rubber
    		120One Tip7734A420000000
    Desoldering Irons
    Image of Product. Front orientation. Desoldering Irons. Multichannel Soldering and Desoldering Stations, Metcal, Model Number CV-H5-DS.

    Model Number CV-H5-DS

    Point
    For Station Manufacturer
    Series
    For Nozzle Manufacturer
    Series
    Wattage,
    W
    Temp. Range,
    ° F
    Wd.
    ID
    Nozzle
    Connection
    Mfr. Model
    No.
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    CVDSC80680 to 9501/16"3/64"PlugCV-H5-DSContinuous30Metal120One Desoldering Iron Stand
    One Nozzle
    One Scouring Scrubber
    One Sponge    		5836N110000000
    Replacement Stands
    Image of Product. Front orientation. Soldering and Desoldering Iron Stands. Multichannel Soldering and Desoldering Stations.
    For Iron
    Mfr. Model No.
    Mfr. Model
    No.
    Includes
    Each
    CV-H1-AVCV-W1AVOne Scouring Scrubber, One Sponge4869N340000000
    CV-H5-DSCV-W5DSOne Scouring Scrubber, One Sponge4869N33000000
    Tips
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Chisel.
    Image of Product. Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Conical.

    Chisel

    Conical

    For Iron
    Mfr. Model No.
    Mfr. Model
    No.
    Tip
    Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    CVC Series
    CV-H1-AVCVC-8CH0014SChisel87525/64"1/16"PlugSolderingCV5793N41000000
    CV-H1-AVCVC-8CH0025SChisel87525/64"3/32"PlugSolderingCV5793N4300000
    CV-H1-AVCVC-8CN0004PConical87511/32"1/64"PlugSolderingCV5793N4500000
    CV-H1-AVCVC-8CN0010PConical8751/4"3/64"PlugSolderingCV5793N4700000
    CV-H1-AVCVC-9CH0014SChisel95025/64"1/16"PlugSolderingCV5793N4200000
    CV-H1-AVCVC-9CH0025SChisel95025/64"3/32"PlugSolderingCV5793N4400000
    CV-H1-AVCVC-9CN0004PConical95011/32"1/64"PlugSolderingCV5793N4600000
    CV-H1-AVCVC-9CN0010PConical9501/4"3/64"PlugSolderingCV5793N4800000
     
    Desoldering Iron Nozzles
    Image of Product. Metcal DSC. Front orientation. Desoldering Iron Tips. Multichannel Soldering and Desoldering Stations, Metcal, DSC Series.

    Metcal DSC

    Point
    For Iron
    Mfr. Model No.
    Mfr. Model
    No.
    Max. Temp.,
    ° F
    Lg.
    Wd.
    ID
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    DSC Series
    CV-H5-DSDSC-7CN0010S7757/16"1/16"3/64"PlugDesolderingCV5806N22000000
    CV-H5-DSDSC-7CN006S77529/64"3/64"1/32"PlugDesolderingCV5806N2100000
     
    Metcal MFR Series Stations
    Image of Product. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, MFR Series.
    Image of Specification. Conical Tip. Front orientation. ZoomedIn view. Conical. Multichannel Soldering and Desoldering Stations, MFR Series.

    Conical Tip

    Metcal MFR stations have a built-in vacuum for desoldering jobs. The included desoldering iron has a removable handle, so you can hold it like a pencil or a gun.
    Desoldering irons heat and suction off solder for precise removal. To prevent solder clogs, they have an in-line collection chamber. Fixed-temperature tips require you to change out the tip if you need to adjust the temperature.
    Tip (Plug
    Connection)
    Nozzle (Plug
    Connection)
    Electrical
    No. of
    Channels
    Station
    Type
    Iron
    Wattage
    Temp. Range,
    ° F
    Wattage,
    W
    Shape
    Point
    Wd.
    Point
    Wd.
    Point
    ID
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Each
    Model Number MFR-1351
     
    120V AC
    2Soldering
    Desoldering    		60 W
    60 W    		690 to 880110Conical1/32"3/16"1/32"Continuous2543Plug In700°F Fixed-Temperature Soldering Tip
    790°F Fixed-Temperature Desoldering Nozzle
    One Desoldering Iron
    One Desoldering Iron Stand
    One Soldering Iron
    One Soldering Iron Stand
    Two Scouring Scrubbers
    Two Sponges    		4869N41000000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Metcal, For Soldering Stations.
    Image of Specification. Conical Tip. Front orientation. ZoomedIn view. Soldering Irons. Multichannel Soldering and Desoldering Stations, Metcal, For Soldering Stations, Conical Tip.

    For Soldering Stations

    Conical Tip

    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    For Station
    Type
    Tip
    Shape
    Point
    Wd.
    Tip
    Connection
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    MFRMFR-H1-SC260690 to 880SolderingConical1/64"PlugSFPContinuous15Plastic120One Tip7734A470000000
    Desoldering Irons
    Image of Product. Front orientation. Desoldering Irons. Multichannel Soldering and Desoldering Stations, Metcal, Model Number MFR-H5-DS.

    Model Number MFR-H5-DS

    Point
    For Station Manufacturer
    Series
    For Nozzle Manufacturer
    Series
    Wattage,
    W
    Temp. Range,
    ° F
    Wd.
    ID
    Nozzle
    Connection
    Mfr. Model
    No.
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    MFRDFP60690 to 8803/32"3/64"PlugMFR-H5-DSContinuous25Plastic120One Nozzle5836N120000000
    Replacement Stands
    Image of Product. Front orientation. Soldering and Desoldering Iron Stands. Multichannel Soldering and Desoldering Stations.
    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Includes
    Each
    MFR-H1-SC2WS1One Scouring Scrubber, One Sponge4869N370000000
    MFR-H5-DSMFR-WSDSUOne Scouring Scrubber, One Sponge4869N36000000
    Tips
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Chisel.
    Image of Product. Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Conical.

    Chisel

    Conical

    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Tip
    Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    SFP Series
    MFR-H1-SC2SFP-CH10Chisel7907/16"3/64"PlugSolderingMFR5793N55000000
    MFR-H1-SC2SFP-CH15Chisel79025/64"1/16"PlugSolderingMFR5793N5600000
    MFR-H1-SC2SFP-CH20Chisel79025/64"5/16"PlugSolderingMFR5793N5700000
    MFR-H1-SC2SFP-CH25Chisel79025/64"3/32"PlugSolderingMFR5793N5800000
    MFR-H1-SC2SFP-CN04Conical79011/32"1/64"PlugSolderingMFR5793N5200000
    MFR-H1-SC2SFP-CN05Conical79013/64"1/32"PlugSolderingMFR5793N5300000
    MFR-H1-SC2SFP-CN10Conical79025/64"3/64"PlugSolderingMFR5793N5400000
     
    Desoldering Iron Nozzles
    Image of Product. Metcal DFP. Front orientation. Desoldering Iron Tips. Multichannel Soldering and Desoldering Stations, Metcal, DFP Series.

    Metcal DFP

    Point
    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Max. Temp.,
    ° F
    Lg.
    Wd.
    ID
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    DFP Series
    MFR-H5-DSDFP-CN27907/32"3/16"1/32"PlugDesolderingMFR5793N49000000
    MFR-H5-DSDFP-CN47907/32"3/32"3/64"PlugDesolderingMFR5793N5100000
     
    Weller WR2 Series Stations
    Image of Product. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WR2 Series.
    Image of Specification. Display. Front orientation. ZoomedIn view. Contains Border. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WR2 Series.

    Display

    Image of Specification. Chisel Tip. Front orientation. Chisel. Multichannel Soldering and Desoldering Stations, WR2 Series.

    Chisel Tip

    Weller WR2 stations have a USB connection, so you can connect them to your computer to adjust standby temperature, automatic shut-off timing, and other settings. This also gives you a way to log soldering temperatures and update station firmware. The included iron keeps its settings even if you use it with a different station. WR2000VX stations have a built-in vacuum for desoldering and a built-in air pump for hot air applications.
    Desoldering irons heat and suction off solder for precise removal. To prevent solder clogs, they have an in-line collection chamber.
    Tip (Plug
    Connection)
    Nozzle (Plug
    Connection)
    Electrical
    No. of
    Channels
    Station
    Type
    Iron
    Wattage
    Temp. Range,
    ° F
    Wattage,
    W
    Shape
    Point
    Wd.
    Point
    Wd.
    Point
    ID
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Each
    Model Number WR2000VX
     
    120V AC
    2Soldering
    Desoldering    		80 W
    80 W    		150 to 990250Chisel3/32"3/32"3/64"Continuous6063Plug InOne Desoldering Iron
    One Desoldering Iron Stand
    One Nozzle
    One Tip
    One Soldering Iron
    One Soldering Iron Stand
    Two Scouring Scrubbers
    Two Sponges    		4869N26000000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Soldering Stations.
    Image of Specification. Chisel Tip. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Soldering Stations, Chisel Tip.

    For Soldering Stations

    Chisel Tip

    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    For Station
    Type
    Tip
    Shape
    Point
    Wd.
    Tip
    Connection
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    WR2, WR3M, WT1, WT1H, WT2MWP6565150 to 850SolderingChisel1/16"PlugXNTContinuous10Plastic24One Tip7724A1150000000
    WR2, WR3M, WT1, WT1H, WT2MWP8080150 to 850SolderingChisel3/32"PlugLTContinuous10Rubber
    		24One Tip7724A527000000
    WR2, WR3M, WT1H, WT2MWP120120150 to 845SolderingChisel1/16"PlugXTContinuous14Rubber
    		24One Tip7734A36000000
    WR2, WT1H, WT2MWP200200360 to 850SolderingChisel13/64"PlugXHTContinuous45Plastic24One Tip7734A37000000
    WR2, WR3M, WT1, WT1H, WT2MWSP8080200 to 840SolderingChisel1/16"PlugLTContinuous45Rubber
    		24One Tip7734A34000000
    Desoldering Irons
    Image of Product. Back orientation. Desoldering Irons. Multichannel Soldering and Desoldering Stations, Weller, Model Number DXV 80.

    Model Number DXV 80

    Point
    For Station Manufacturer
    Series
    For Nozzle Manufacturer
    Series
    Wattage,
    W
    Temp. Range,
    ° F
    Wd.
    ID
    Nozzle
    Connection
    Mfr. Model
    No.
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    WR2, WR3MDX80150 to 8501/8"5/64"PlugDXV 80Continuous65Rubber
    		24One Nozzle7327N120000000
    Replacement Stands
    Image of Product. Front orientation. Soldering and Desoldering Iron Stands. Multichannel Soldering and Desoldering Stations.
    For Iron
    Manufacturer Model No.
    Wattage, W
    Mfr. Model
    No.
    Includes
    Each
    DXV80200WDH 40One Scouring Scrubber4869N240000000
    WP65, WSP80, WXP65, WXP12065, 80, 120WDH 10One Scouring Scrubber7724A461000000
    WP65, WP80, WP12065, 80, 120WDH 10TOne Scouring Scrubber4869N25000000
    WP65, WSP80, WXP65, WXP12065, 80, 120WSR 201One Scouring Scrubber, One Sponge7724A768000000
    WP200200WSR 202One Scouring Scrubber, One Sponge7724A15000000
    Tips
    Image of Product. Bevel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Bevel.
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Chisel.
    Image of Product. Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Conical.
    Image of Product. Gullwing. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Gullwing.
    Image of Product. Knife. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Knife.

    Bevel

    Chisel

    Conical

    Gullwing

    Knife

    Image of Product. Round. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Round.
    Image of Product. 30° Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 30° Chisel.
    Image of Product. 30° Round. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 30° Round.
    Image of Product. 45° Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 45° Chisel.
    Image of Product. 45° Knife. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 45° Knife.

    Round

    30° Chisel

    30° Round

    45° Chisel

    45° Knife

    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Tip Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    LT Series
    WP80, WSP801LConical8501 1/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A12800000
    WP80, WSP801SARound85019/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14200000
    WP80, WSP801SLX30° Round85055/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13400000
    WP80, WSP804Bevel85019/32"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13600000
    WP80, WSP8022CPBevel85025/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1290000
    WP80, WSP8033CPBevel85025/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13100000
    WP80, WSP80BBBevel85021/32"3/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13700000
    WP80, WSP80CC 60Bevel85021/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13800000
    WP80, WSP80DD 45Bevel85025/32"5/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13900000
    WP80, WSP80FBevel85033/64"15/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1320000
    WP80, WSP80GW1Gullwing85045/64"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1330000
    WP80, WSP80GW2Gullwing85045/64"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14500000
    WP80, WSP80KNKnife85021/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14100000
    WP80, WSP80KNSL45° Knife85021/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14400000
    WP80, WSP80LT1SRound8505/8"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A340000
    WP80, WSP80LTAChisel8503/8"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A540000
    WP80, WSP80LTASRound8503/8"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A510000
    WP80, WSP80LTBChisel8501/2"3/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A520000
    WP80, WSP80LTCChisel8501/2"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A550000
    WP80, WSP80LTCSRound8501/2"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A530000
    WP80, WSP80LTDChisel8501/2"3/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1190000
    WP80, WSP80LTKChisel85013/16"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1220000
    WP80, WSP80LTLChisel85013/16"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1240000
    WP80, WSP80LTSRound85013/16"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1260000
     
    XHT Series
    WP200XHT CChisel8501 7/8"1/8"PlugSolderingWR2, WT1H, WT2M5793N3100000
    WP200XHT DChisel8501 7/8"13/64"PlugSolderingWR2, WT1H, WT2M5793N2900000
    WP200XHT EChisel8501 7/8"19/64"PlugSolderingWR2, WT1H, WT2M5793N3200000
    WP200XHT FChisel8501 7/8"3/8"PlugSolderingWR2, WT1H, WT2M5793N3300000
     
    XNT Series
    WP65, WTP90, WXP651LXRound8501 43/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51700000
    WP65, WTP90, WXP651SCNWChisel8501 1/16"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51900000
    WP65, WTP90, WXP651XRound8501 7/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51200000
    WP65, WTP90, WXP65AXChisel8501 7/64"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51100000
    WP65, WTP90, WXP65HX30° Chisel8501 7/16"1/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51800000
    WP65, WTP90, WXP65LChisel8501 15/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51300000
    WP65, WTP90, WXP65SConical8501 15/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51400000
     
    XT Series
    WP120, WXP120AA 60Bevel8501 29/64"1/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52200000
    WP120, WXP120BB 45Bevel8501 29/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52300000
    WP120, WXP120BSRound8501 29/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52800000
    WP120, WXP120BSCChisel8501 27/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53800000
    WP120, WXP120BSLChisel8501 27/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53900000
    WP120, WXP120BX30° Chisel8501 13/32"5/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54200000
    WP120, WXP120CC 45Bevel8501 29/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52400000
    WP120, WXP120CSRound8501 29/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52900000
    WP120, WXP120CSLChisel8501 27/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54100000
    WP120, WXP120D 4545° Chisel8501 29/64"1/4"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53300000
    WP120, WXP120DLChisel8501 37/64"3/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53600000
    WP120, WXP120DSRound8501 3/8"3/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53100000
    WP120, WXP120F 30Bevel8501 29/64"3/64"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53200000
    WP120, WXP120GW1Gullwing8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52600000
    WP120, WXP120GW2Gullwing8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53500000
    WP120, WXP120HChisel8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52700000
    WP120, WXP120HXChisel8501 1/2"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53700000
    WP120, WXP120KNKnife8501 49/64"5/64"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52500000
    WP120, WXP120MXChisel8501 1/2"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54300000
     
    Desoldering Iron Nozzles
    Image of Product. Weller DX. Front orientation. Desoldering Iron Tips. Multichannel Soldering and Desoldering Stations, DX Series.

    Weller DX

    Point
    For Iron
    Mfr. Model No.
    Mfr. Model
    No.
    Max. Temp.,
    ° F
    Lg.
    Wd.
    ID
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    DX Series
    DXV80DX 1121,00063/64"3/32"3/64"PlugDesolderingWR2, WR3M5806N14000000
    DXV80DX 1131,00063/64"3/32"3/64"PlugDesolderingWR2, WR3M5806N1500000
     
    Weller WR3M Series Stations
    Image of Product. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WR3M Series.
    Image of Specification. Display. Front orientation. ZoomedIn view. Contains Border. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WR3M Series.

    Display

    Image of Specification. Chisel Tip. Front orientation. Chisel. Multichannel Soldering and Desoldering Stations, WR3M Series.

    Chisel Tip

    Weller WR3M stations have a USB connection, so you can connect them to your computer to adjust standby temperature, automatic shut-off timing, and other settings. This also gives you a way to log soldering temperatures and update station firmware. The included iron keeps its settings even if you use it with a different station. WR3000M stations have a built-in vacuum for desoldering and a built-in air pump for hot air applications.
    Desoldering irons heat and suction off solder for precise removal. To prevent solder clogs, they have an in-line collection chamber. Hot air irons are good for delicately heating soldered electronic parts for removal.
    Tip (Plug
    Connection)
    Nozzle (Plug
    Connection)
    Electrical
    No. of
    Channels
    Station Type
    Iron
    Wattage
    Temp. Range,
    ° F
    Wattage,
    W
    Shape
    Point
    Wd.
    Point Wd.
    Point ID
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Each
    Model Number WR3000M
     
    120V AC
    3Soldering
    Desoldering
    Hot Air Soldering    		80 W
    80 W
    200 W    		200 to 850360Chisel3/32"7/64", 3/64"
    3/64", 1/8"    		5/64", 3/32"
    1/64", 1/32"    		Continuous6063Plug InFour Nozzles
    One Desoldering Iron
    One Desoldering Iron Stand
    One Hot Air Iron
    One Hot Air Iron Stand
    One Tip
    One Soldering Iron
    One Soldering Iron Stand
    Three Scouring Scrubbers
    Three Sponges
    Vacuum Pick-Up Tool    		4869N23000000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Soldering Stations.
    Image of Specification. Chisel Tip. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Soldering Stations, Chisel Tip.

    For Soldering Stations

    Chisel Tip

    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    For Station
    Type
    Tip
    Shape
    Point
    Wd.
    Tip
    Connection
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    WR2, WR3M, WT1, WT1H, WT2MWP6565150 to 850SolderingChisel1/16"PlugXNTContinuous10Plastic24One Tip7724A1150000000
    WR2, WR3M, WT1, WT1H, WT2MWP8080150 to 850SolderingChisel3/32"PlugLTContinuous10Rubber
    		24One Tip7724A527000000
    WR2, WR3M, WT1H, WT2MWP120120150 to 845SolderingChisel1/16"PlugXTContinuous14Rubber
    		24One Tip7734A36000000
    WR2, WR3M, WT1, WT1H, WT2MWSP8080200 to 840SolderingChisel1/16"PlugLTContinuous45Rubber
    		24One Tip7734A34000000
    WR3M, WT2MWMRP MS40200 to 850SolderingChisel3/64"PlugRTM-MSContinuous3Rubber
    		12One Tip7734A33000000
    WR3M, WT1, WT1H, WT2MWTP9090200 to 850SolderingChisel1/16"PlugXNTContinuous10Rubber
    		24One Tip7724A112000000
    Desoldering Irons
    Image of Product. Back orientation. Desoldering Irons. Multichannel Soldering and Desoldering Stations, Weller, Model Number DXV 80.

    Model Number DXV 80

    Point
    For Station Manufacturer
    Series
    For Nozzle Manufacturer
    Series
    Wattage,
    W
    Temp. Range,
    ° F
    Wd.
    ID
    Nozzle
    Connection
    Mfr. Model
    No.
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    WR2, WR3MDX80150 to 8501/8"5/64"PlugDXV 80Continuous65Rubber
    		24One Nozzle7327N120000000
    Hot Air Irons
    Image of Product. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Hot Air Soldering Stations.

    For Hot Air Soldering

    Stations

    Point
    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    Airflow,
    ft³/min
    Wd.
    ID
    For Nozzle Manufacturer
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    For Station Type
    Each
    WR3MHAP200200200 to 9900.53/64"1/64"RContinuous45Plastic24One NozzleHot Air Soldering4928N110000000
    Replacement Stands
    Image of Product. Front orientation. Soldering and Desoldering Iron Stands. Multichannel Soldering and Desoldering Stations.
    For Iron
    Manufacturer Model No.
    Wattage, W
    Mfr. Model
    No.
    Includes
    Each
    DXV80200WDH 40One Scouring Scrubber4869N240000000
    HAP200200WDH 30One Scouring Scrubber4869N16000000
    WMRP MS40WSR 205One Scouring Scrubber, One Sponge4869N21000000
    WP65, WSP80, WXP65, WXP12065, 80, 120WDH 10One Scouring Scrubber7724A461000000
    WP65, WP80, WP12065, 80, 120WDH 10TOne Scouring Scrubber4869N25000000
    WP65, WSP80, WXP65, WXP12065, 80, 120WSR 201One Scouring Scrubber, One Sponge7724A768000000
    WTP9090WSR 200One Scouring Scrubber, One Sponge7724A113000000
    Tips
    Image of Product. Bevel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Bevel.
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Chisel.
    Image of Product. Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Conical.
    Image of Product. Gullwing. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Gullwing.

    Bevel

    Chisel

    Conical

    Gullwing

    Image of Product. Knife. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Knife.
    Image of Product. Round. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Round.
    Image of Product. 25° Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 25° Conical.
    Image of Product. 30° Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 30° Chisel.

    Knife

    Round

    25° Conical

    30° Chisel

    Image of Product. 30° Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 30° Conical.
    Image of Product. 30° Round. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 30° Round.
    Image of Product. 45° Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 45° Chisel.
    Image of Product. 45° Knife. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 45° Knife.

    30° Conical

    30° Round

    45° Chisel

    45° Knife

    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Tip Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    LT Series
    WP80, WSP801LConical8501 1/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A12800000
    WP80, WSP801SARound85019/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14200000
    WP80, WSP801SLX30° Round85055/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13400000
    WP80, WSP804Bevel85019/32"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13600000
    WP80, WSP8022CPBevel85025/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1290000
    WP80, WSP8033CPBevel85025/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13100000
    WP80, WSP80BBBevel85021/32"3/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13700000
    WP80, WSP80CC 60Bevel85021/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13800000
    WP80, WSP80DD 45Bevel85025/32"5/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13900000
    WP80, WSP80FBevel85033/64"15/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1320000
    WP80, WSP80GW1Gullwing85045/64"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1330000
    WP80, WSP80GW2Gullwing85045/64"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14500000
    WP80, WSP80KNKnife85021/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14100000
    WP80, WSP80KNSL45° Knife85021/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14400000
    WP80, WSP80LT1SRound8505/8"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A340000
    WP80, WSP80LTAChisel8503/8"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A540000
    WP80, WSP80LTASRound8503/8"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A510000
    WP80, WSP80LTBChisel8501/2"3/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A520000
    WP80, WSP80LTCChisel8501/2"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A550000
    WP80, WSP80LTCSRound8501/2"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A530000
    WP80, WSP80LTDChisel8501/2"3/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1190000
    WP80, WSP80LTKChisel85013/16"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1220000
    WP80, WSP80LTLChisel85013/16"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1240000
    WP80, WSP80LTSRound85013/16"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1260000
     
    RTM-MS Series
    WMRP MS, WXMP MS1NWMSConical85025/32"1/64"PlugSolderingWR3M, WT2M, WX7008A55300000
    WMRP MS, WXMP MS1SCMSChisel85025/32"1/64"PlugSolderingWR3M, WT2M, WX7008A54800000
    WMRP MS, WXMP MS3MSChisel85025/32"3/64"PlugSolderingWR3M, WT2M, WX7008A54600000
    WMRP MS, WXMP MS3XMS30° Chisel8501 7/64"3/64"PlugSolderingWR3M, WT2M, WX7008A54700000
    WMRP MS, WXMP MS9MSChisel85061/64"1/32"PlugSolderingWR3M, WT2M, WX7008A55100000
    WMRP MS, WXMP MS10GWMSGullwing85053/64"5/64"PlugSolderingWR3M, WT2M, WX7008A55200000
    WMRP MS, WXMP MS11MSChisel8503/4"1/64"PlugSolderingWR3M, WT2M, WX7008A55600000
    WMRP MS, WXMP MS12MS25° Conical8501 3/64"1/64"PlugSolderingWR3M, WT2M, WX7008A55700000
    WMRP MS, WXMP MS13MS30° Conical8501 3/64"1/64"PlugSolderingWR3M, WT2M, WX7008A55800000
    WMRP MS, WXMP MS14MSConical8504 21/64"1/64"PlugSolderingWR3M, WT2M, WX7008A54400000
    WMRP MS, WXMP MS15MSConical8504 25/64"1/32"PlugSolderingWR3M, WT2M, WX7008A54500000
    WMRP MS, WXMP MSKNMSKnife8504 13/32"17/32"PlugSolderingWR3M, WT2M, WX7008A55500000
    WMRP MS, WXMP MSRT8MSChisel8503/4"3/32"PlugSolderingWR3M, WT2M, WX7008A54900000
     
    XNT Series
    WP65, WTP90, WXP651LXRound8501 43/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51700000
    WP65, WTP90, WXP651SCNWChisel8501 1/16"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51900000
    WP65, WTP90, WXP651XRound8501 7/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51200000
    WP65, WTP90, WXP65AXChisel8501 7/64"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51100000
    WP65, WTP90, WXP65HX30° Chisel8501 7/16"1/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51800000
    WP65, WTP90, WXP65LChisel8501 15/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51300000
    WP65, WTP90, WXP65SConical8501 15/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51400000
     
    XT Series
    WP120, WXP120AA 60Bevel8501 29/64"1/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52200000
    WP120, WXP120BB 45Bevel8501 29/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52300000
    WP120, WXP120BSRound8501 29/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52800000
    WP120, WXP120BSCChisel8501 27/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53800000
    WP120, WXP120BSLChisel8501 27/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53900000
    WP120, WXP120BX30° Chisel8501 13/32"5/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54200000
    WP120, WXP120CC 45Bevel8501 29/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52400000
    WP120, WXP120CSRound8501 29/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52900000
    WP120, WXP120CSLChisel8501 27/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54100000
    WP120, WXP120D 4545° Chisel8501 29/64"1/4"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53300000
    WP120, WXP120DLChisel8501 37/64"3/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53600000
    WP120, WXP120DSRound8501 3/8"3/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53100000
    WP120, WXP120F 30Bevel8501 29/64"3/64"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53200000
    WP120, WXP120GW1Gullwing8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52600000
    WP120, WXP120GW2Gullwing8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53500000
    WP120, WXP120HChisel8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52700000
    WP120, WXP120HXChisel8501 1/2"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53700000
    WP120, WXP120KNKnife8501 49/64"5/64"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52500000
    WP120, WXP120MXChisel8501 1/2"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54300000
     
    Hot Air Nozzles
    Image of Product. Weller R. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, R Series.

    Weller R

    Point
    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Max. Temp.,
    ° F
    Lg.
    Wd.
    ID
    For Station Type
    For Station Manufacturer
    Series
    Each
    R Series
    HAP200, WXHAP200R041,00041/64"3/64"1/32"Hot Air SolderingWR3M, WXA2, WXsmart5806N16000000
    HAP200, WXHAP200R061,00041/64"3/64"1/64"Hot Air SolderingWR3M, WXA2, WXsmart5806N120000
     
    Desoldering Iron Nozzles
    Image of Product. Weller DX. Front orientation. Desoldering Iron Tips. Multichannel Soldering and Desoldering Stations, DX Series.

    Weller DX

    Point
    For Iron
    Mfr. Model No.
    Mfr. Model
    No.
    Max. Temp.,
    ° F
    Lg.
    Wd.
    ID
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    DX Series
    DXV80DX 1121,00063/64"3/32"3/64"PlugDesolderingWR2, WR3M5806N14000000
    DXV80DX 1131,00063/64"3/32"3/64"PlugDesolderingWR2, WR3M5806N1500000
     
    Weller WT2M Series Stations
    Image of Product. Soldering. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WT2M Series, Model Number WT2010M.
    Image of Product. Soldering, Desoldering. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WT2M Series, Model Number WT2021M.

    Soldering

    Soldering, Desoldering

    Image of Specification. Display. Front orientation. ZoomedIn view. Contains Border. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WT2M Series.
    Image of Specification. Chisel Tip. Front orientation. Chisel. Multichannel Soldering and Desoldering Stations, WT2M Series.
    Image of Specification. Chisel Tweezer Tip. Front orientation. Chisel-Tweezer Tip. Multichannel Soldering and Desoldering Stations, WT2M Series.

    Display

    Chisel Tip

    Chisel Tweezer

    Tip

    One Desoldering Tweezer—Desoldering tweezers are better than irons for fine work that requires a lot of power, such as soldering and desoldering surface-mount devices.
    Tip (Plug
    Connection)
    Nozzle (Plug
    Connection)
    Electrical
    No. of
    Channels
    Station
    Type
    Iron
    Wattage
    Tweezer
    Wattage
    Temp. Range,
    ° F
    Wattage,
    W
    Shape
    Point
    Wd.
    Tip Shape
    Point
    Wd.
    Tip
    Connection
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Each
    Model Number WT2010M
     
    120V AC
    2Soldering90 W—150 to 850150Chisel1/16"——PlugContinuous6063Plug InOne Tip
    One Soldering Iron
    One Sponge
    One Scouring Scrubber
    One Soldering Iron Stand    		4869N170000000
     
    Model Number WT2021M
     
    120V AC
    2Soldering
    Desoldering    		40 W
    __    		__
    40 W    		150 to 850150Chisel1/32"Chisel Tweezer3/64"—Continuous6063Plug InOne Desoldering Tweezer
    One Desoldering Tweezer Stand
    One Soldering Iron
    One Soldering Iron Stand
    Two Scouring Scrubbers
    Two Sponges
    Two Tips    		4869N1800000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Soldering Stations.
    Image of Specification. Chisel Tip. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Soldering Stations, Chisel Tip.

    For Soldering Stations

    Chisel Tip

    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    For Station
    Type
    Tip
    Shape
    Point
    Wd.
    Tip
    Connection
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    WR2, WR3M, WT1, WT1H, WT2MWP6565150 to 850SolderingChisel1/16"PlugXNTContinuous10Plastic24One Tip7724A1150000000
    WR2, WR3M, WT1, WT1H, WT2MWP8080150 to 850SolderingChisel3/32"PlugLTContinuous10Rubber
    		24One Tip7724A527000000
    WR2, WR3M, WT1H, WT2MWP120120150 to 845SolderingChisel1/16"PlugXTContinuous14Rubber
    		24One Tip7734A36000000
    WR2, WT1H, WT2MWP200200360 to 850SolderingChisel13/64"PlugXHTContinuous45Plastic24One Tip7734A37000000
    WR2, WR3M, WT1, WT1H, WT2MWSP8080200 to 840SolderingChisel1/16"PlugLTContinuous45Rubber
    		24One Tip7734A34000000
    WR3M, WT2MWMRP MS40200 to 850SolderingChisel3/64"PlugRTM-MSContinuous3Rubber
    		12One Tip7734A33000000
    WR3M, WT1, WT1H, WT2MWTP9090200 to 850SolderingChisel1/16"PlugXNTContinuous10Rubber
    		24One Tip7724A112000000
    Replacement Stands
    Image of Product. Front orientation. Soldering and Desoldering Iron Stands. Multichannel Soldering and Desoldering Stations.
    For Iron
    Manufacturer Model No.
    Wattage, W
    Mfr. Model
    No.
    Includes
    Each
    WMRP MS40WSR 205One Scouring Scrubber, One Sponge4869N210000000
    WP65, WSP80, WXP65, WXP12065, 80, 120WDH 10One Scouring Scrubber7724A461000000
    WP65, WP80, WP12065, 80, 120WDH 10TOne Scouring Scrubber4869N25000000
    WP65, WSP80, WXP65, WXP12065, 80, 120WSR 201One Scouring Scrubber, One Sponge7724A768000000
    WP200200WSR 202One Scouring Scrubber, One Sponge7724A15000000
    WTP9090WSR 200One Scouring Scrubber, One Sponge7724A113000000
    Tips
    Image of Product. Bevel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Bevel.
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Chisel.
    Image of Product. Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Conical.
    Image of Product. Gullwing. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Gullwing.

    Bevel

    Chisel

    Conical

    Gullwing

    Image of Product. Knife. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Knife.
    Image of Product. Round. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Round.
    Image of Product. 25° Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 25° Conical.
    Image of Product. 30° Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 30° Chisel.

    Knife

    Round

    25° Conical

    30° Chisel

    Image of Product. 30° Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 30° Conical.
    Image of Product. 30° Round. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 30° Round.
    Image of Product. 45° Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 45° Chisel.
    Image of Product. 45° Knife. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 45° Knife.

    30° Conical

    30° Round

    45° Chisel

    45° Knife

    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Tip Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    LT Series
    WP80, WSP801LConical8501 1/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A12800000
    WP80, WSP801SARound85019/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14200000
    WP80, WSP801SLX30° Round85055/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13400000
    WP80, WSP804Bevel85019/32"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13600000
    WP80, WSP8022CPBevel85025/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1290000
    WP80, WSP8033CPBevel85025/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13100000
    WP80, WSP80BBBevel85021/32"3/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13700000
    WP80, WSP80CC 60Bevel85021/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13800000
    WP80, WSP80DD 45Bevel85025/32"5/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A13900000
    WP80, WSP80FBevel85033/64"15/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1320000
    WP80, WSP80GW1Gullwing85045/64"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A1330000
    WP80, WSP80GW2Gullwing85045/64"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14500000
    WP80, WSP80KNKnife85021/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14100000
    WP80, WSP80KNSL45° Knife85021/32"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A14400000
    WP80, WSP80LT1SRound8505/8"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A340000
    WP80, WSP80LTAChisel8503/8"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A540000
    WP80, WSP80LTASRound8503/8"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A510000
    WP80, WSP80LTBChisel8501/2"3/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A520000
    WP80, WSP80LTCChisel8501/2"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A550000
    WP80, WSP80LTCSRound8501/2"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7724A530000
    WP80, WSP80LTDChisel8501/2"3/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1190000
    WP80, WSP80LTKChisel85013/16"3/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1220000
    WP80, WSP80LTLChisel85013/16"5/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1240000
    WP80, WSP80LTSRound85013/16"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M7008A1260000
     
    RTM-MS Series
    WMRP MS, WXMP MS1NWMSConical85025/32"1/64"PlugSolderingWR3M, WT2M, WX7008A55300000
    WMRP MS, WXMP MS1SCMSChisel85025/32"1/64"PlugSolderingWR3M, WT2M, WX7008A54800000
    WMRP MS, WXMP MS3MSChisel85025/32"3/64"PlugSolderingWR3M, WT2M, WX7008A54600000
    WMRP MS, WXMP MS3XMS30° Chisel8501 7/64"3/64"PlugSolderingWR3M, WT2M, WX7008A54700000
    WMRP MS, WXMP MS9MSChisel85061/64"1/32"PlugSolderingWR3M, WT2M, WX7008A55100000
    WMRP MS, WXMP MS10GWMSGullwing85053/64"5/64"PlugSolderingWR3M, WT2M, WX7008A55200000
    WMRP MS, WXMP MS11MSChisel8503/4"1/64"PlugSolderingWR3M, WT2M, WX7008A55600000
    WMRP MS, WXMP MS12MS25° Conical8501 3/64"1/64"PlugSolderingWR3M, WT2M, WX7008A55700000
    WMRP MS, WXMP MS13MS30° Conical8501 3/64"1/64"PlugSolderingWR3M, WT2M, WX7008A55800000
    WMRP MS, WXMP MS14MSConical8504 21/64"1/64"PlugSolderingWR3M, WT2M, WX7008A54400000
    WMRP MS, WXMP MS15MSConical8504 25/64"1/32"PlugSolderingWR3M, WT2M, WX7008A54500000
    WMRP MS, WXMP MSKNMSKnife8504 13/32"17/32"PlugSolderingWR3M, WT2M, WX7008A55500000
    WMRP MS, WXMP MSRT8MSChisel8503/4"3/32"PlugSolderingWR3M, WT2M, WX7008A54900000
     
    XHT Series
    WP200XHT CChisel8501 7/8"1/8"PlugSolderingWR2, WT1H, WT2M5793N3100000
    WP200XHT DChisel8501 7/8"13/64"PlugSolderingWR2, WT1H, WT2M5793N2900000
    WP200XHT EChisel8501 7/8"19/64"PlugSolderingWR2, WT1H, WT2M5793N3200000
    WP200XHT FChisel8501 7/8"3/8"PlugSolderingWR2, WT1H, WT2M5793N3300000
     
    XNT Series
    WP65, WTP90, WXP651LXRound8501 43/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51700000
    WP65, WTP90, WXP651SCNWChisel8501 1/16"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51900000
    WP65, WTP90, WXP651XRound8501 7/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51200000
    WP65, WTP90, WXP65AXChisel8501 7/64"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51100000
    WP65, WTP90, WXP65HX30° Chisel8501 7/16"1/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51800000
    WP65, WTP90, WXP65LChisel8501 15/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51300000
    WP65, WTP90, WXP65SConical8501 15/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51400000
     
    XT Series
    WP120, WXP120AA 60Bevel8501 29/64"1/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52200000
    WP120, WXP120BB 45Bevel8501 29/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52300000
    WP120, WXP120BSRound8501 29/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52800000
    WP120, WXP120BSCChisel8501 27/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53800000
    WP120, WXP120BSLChisel8501 27/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53900000
    WP120, WXP120BX30° Chisel8501 13/32"5/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54200000
    WP120, WXP120CC 45Bevel8501 29/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52400000
    WP120, WXP120CSRound8501 29/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52900000
    WP120, WXP120CSLChisel8501 27/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54100000
    WP120, WXP120D 4545° Chisel8501 29/64"1/4"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53300000
    WP120, WXP120DLChisel8501 37/64"3/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53600000
    WP120, WXP120DSRound8501 3/8"3/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53100000
    WP120, WXP120F 30Bevel8501 29/64"3/64"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53200000
    WP120, WXP120GW1Gullwing8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52600000
    WP120, WXP120GW2Gullwing8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53500000
    WP120, WXP120HChisel8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52700000
    WP120, WXP120HXChisel8501 1/2"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53700000
    WP120, WXP120KNKnife8501 49/64"5/64"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52500000
    WP120, WXP120MXChisel8501 1/2"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54300000
     
    Weller WX Series Stations
    Image of Product. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WX Series, Hot Air Soldering.
    Image of Product. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WX Series, Soldering.
    Image of Product. Soldering, Desoldering. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WX Series, Soldering Desoldering.

    Hot Air Soldering

    Soldering

    Soldering, Desoldering

    Image of Specification. Display. Front orientation. ZoomedIn view. Contains Border. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WX Series.
    Image of Specification. Chisel Tip. Front orientation. Chisel. Multichannel Soldering and Desoldering Stations, WX Series.
    Image of Specification. Round Tip. Front orientation. Round. Multichannel Soldering and Desoldering Stations, WX Series.
    Image of Specification. Chisel Tweezer Tip. Front orientation. Chisel-Tweezer Tip. Multichannel Soldering and Desoldering Stations, WX Series.

    Display

    Chisel Tip

    Round Tip

    Chisel Tweezer

    Tip

    Weller WX stations have a USB connection, so you can connect them to your computer to adjust standby temperature, automatic shut-off timing, and other settings. This also gives you a way to log soldering temperatures and update station firmware. The included iron keeps its settings even if you use it with a different station.
    Model Number WXA2010—WXA2010 stations require an external compressed air source.
    One Desoldering Tweezer—Desoldering tweezers are better than irons for fine work that requires a lot of power, such as soldering and desoldering surface-mount devices.
    One Hot Air Iron—Hot air irons are good for delicately heating soldered electronic parts for removal.
    Tip (Plug
    Connection)
    Nozzle (Plug
    Connection)
    Electrical
    No. of
    Channels
    Station Type
    Iron
    Wattage
    Tweezer
    Wattage
    Temp. Range,
    ° F
    Wattage,
    W
    Shape
    Point
    Wd.
    Point
    ID
    Tip Shape
    Point
    Wd.
    Tip
    Connection
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Each
    Model Number WX2020
     
    120V AC
    2Soldering120 W—210 to 990200Chisel3/32"———PlugContinuous1063Plug InTwo Scouring Scrubbers
    Two Soldering Iron Stands
    Two Soldering Irons
    Two Tips    		7724A124000000000
     
    Model Number WX2021
     
    120V AC
    2Soldering
    Desoldering    		40 W
    __    		__
    40 W    		210 to 990200Chisel1/32"—Chisel Tweezer3/64"—Continuous1063Plug InOne Desoldering Tweezer
    One Soldering Iron
    Two Scouring Scrubbers
    Two Soldering Iron Stands
    Two Tips    		7724A12500000000
     
    Model Number WX2022
     
    120V AC
    2Soldering40 W—210 to 990200Chisel1/64"———PlugContinuous363Plug InOne Tip
    One Soldering Iron
    One Sponge
    One Scouring Scrubber
    One Soldering Iron Stand
    Precision Tweezers    		4869N11000000
     
    Model Number WX2023
     
    120V AC
    2Soldering40 W—210 to 990200Round3/64"———PlugContinuous363Plug InOne Tip
    One Soldering Iron
    One Sponge
    One Scouring Scrubber
    One Soldering Iron Stand    		4869N13000000
     
    Model Number WX2024
     
    120V AC
    2Soldering150 W—210 to 990200Chisel1/8"———PlugContinuous763Plug InOne Tip
    One Soldering Iron
    One Sponge
    One Scouring Scrubber
    One Soldering Iron Stand    		4869N14000000
     
    Model Number WXA2010
     
    120V AC
    2Hot Air Soldering200 W—200 to 990200—1/8"1/32"———Continuous6063Plug InOne Hot Air Iron
    One Hot Air Iron Stand
    One Nozzle
    One Sponge
    One Scouring Scrubber    		4869N1500000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Soldering Stations.
    Image of Specification. Chisel Tip. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Soldering Stations, Chisel Tip.

    For Soldering Stations

    Chisel Tip

    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    For Station
    Type
    Tip
    Shape
    Point
    Wd.
    Tip
    Connection
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    WXWXMP MS40200 to 850Soldering——PlugRTM-MSContinuous10Rubber
    		12—7724A1190000000
    WXWXP6565200 to 850SolderingChisel1/16"PlugXNTContinuous10Rubber
    		24One Tip7724A123000000
    WXWXP120120200 to 850SolderingChisel3/32"PlugXTContinuous20Rubber
    		24One Tip7724A117000000
    WXWXPP MS40200 to 850Soldering——PlugRTP-MSContinuous3Rubber
    		12—7734A31000000
    WXWXUP MS150360 to 850Soldering——PlugRTU-MSContinuous7Rubber
    		24—7734A32000000
    Hot Air Irons
    Image of Product. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Hot Air Soldering Stations.

    For Hot Air Soldering

    Stations

    Point
    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    Airflow,
    ft³/min
    Wd.
    ID
    For Nozzle Manufacturer
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    For Station Type
    Each
    WXA2, WXsmartWXHAP200200200 to 9900.73/64"1/32"RContinuous45Plastic24One NozzleHot Air Soldering4928N120000000
    Desoldering Tweezers
    Image of Product. Front orientation. Soldering and Desoldering Tweezers. Multichannel Soldering and Desoldering Stations.
    For Station Manufacturer
    Series
    Wattage,
    W
    Temp. Range,
    ° F
    Tip
    Connection
    Mfr. Model
    No.
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Voltage,
    V AC
    Each
    WX80200 to 850PlugWXMT MSRTW-MSContinuous10127724A1260000000
     
    Replacement Stands
    Image of Product. Front orientation. Soldering and Desoldering Iron Stands. Multichannel Soldering and Desoldering Stations.
    For Iron
    For Tweezer
    Manufacturer Model No.
    Wattage, W
    Mfr. Model
    No.
    Wattage,
    W
    Mfr. Model
    No.
    Includes
    Each
    ——WXMT MS40WDH 60One Scouring Scrubber7724A1270000000
    ——WXMT MS40WSR 210One Scouring Scrubber, One Sponge4869N27000000
    WP65, WSP80, WXP65, WXP12065, 80, 120——WDH 10One Scouring Scrubber7724A461000000
    WP65, WSP80, WXP65, WXP12065, 80, 120——WSR 201One Scouring Scrubber, One Sponge7724A768000000
    WTP9090——WSR 200One Scouring Scrubber, One Sponge7724A113000000
    WXMP MS40——WDH 51One Scouring Scrubber7724A12100000
    WXPP MS40——WSR 208One Scouring Scrubber, One Sponge4869N12000000
    Tips
    Image of Product. Bevel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Bevel.
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Chisel.
    Image of Product. Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Conical.
    Image of Product. Gullwing. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Gullwing.
    Image of Product. Knife. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Knife.

    Bevel

    Chisel

    Conical

    Gullwing

    Knife

    Image of Product. Round. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Round.
    Image of Product. 25° Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 25° Conical.
    Image of Product. 30° Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 30° Chisel.
    Image of Product. 30° Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 30° Conical.
    Image of Product. 45° Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 45° Chisel.

    Round

    25° Conical

    30° Chisel

    30° Conical

    45° Chisel

    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Tip Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    RTM-MS Series
    WMRP MS, WXMP MS1NWMSConical85025/32"1/64"PlugSolderingWR3M, WT2M, WX7008A553000000
    WMRP MS, WXMP MS1SCMSChisel85025/32"1/64"PlugSolderingWR3M, WT2M, WX7008A54800000
    WMRP MS, WXMP MS3MSChisel85025/32"3/64"PlugSolderingWR3M, WT2M, WX7008A54600000
    WMRP MS, WXMP MS3XMS30° Chisel8501 7/64"3/64"PlugSolderingWR3M, WT2M, WX7008A54700000
    WMRP MS, WXMP MS9MSChisel85061/64"1/32"PlugSolderingWR3M, WT2M, WX7008A55100000
    WMRP MS, WXMP MS10GWMSGullwing85053/64"5/64"PlugSolderingWR3M, WT2M, WX7008A55200000
    WMRP MS, WXMP MS11MSChisel8503/4"1/64"PlugSolderingWR3M, WT2M, WX7008A55600000
    WMRP MS, WXMP MS12MS25° Conical8501 3/64"1/64"PlugSolderingWR3M, WT2M, WX7008A55700000
    WMRP MS, WXMP MS13MS30° Conical8501 3/64"1/64"PlugSolderingWR3M, WT2M, WX7008A55800000
    WMRP MS, WXMP MS14MSConical8504 21/64"1/64"PlugSolderingWR3M, WT2M, WX7008A54400000
    WMRP MS, WXMP MS15MSConical8504 25/64"1/32"PlugSolderingWR3M, WT2M, WX7008A54500000
    WMRP MS, WXMP MSKNMSKnife8504 13/32"17/32"PlugSolderingWR3M, WT2M, WX7008A55500000
    WMRP MS, WXMP MSRT8MSChisel8503/4"3/32"PlugSolderingWR3M, WT2M, WX7008A54900000
     
    RTP-MS Series
    WXPP MSRTP 001 C MSConical85045/64"0.003"PlugSolderingWX5793N1200000
    WXPP MSRTP 004 C MSConical85041/64"1/64"PlugSolderingWX5793N1300000
    WXPP MSRTP 013 S MSChisel85041/64"1/16"PlugSolderingWX5793N1100000
     
    RTU-MS Series
    WXUP MSRTU 004 C MSConical8501 7/64"1/64"PlugSolderingWX5793N1700000
    WXUP MSRTU 004 C MS30° Conical8501 35/64"1/64"PlugSolderingWX5793N1800000
    WXUP MSRTU 008 C X MS30° Conical8501 35/64"5/16"PlugSolderingWX5793N1900000
    WXUP MSRTU 015 S MSChisel8501 7/64"1/16"PlugSolderingWX5793N1600000
    WXUP MSRTU 022 S MSChisel8501 7/64"3/32"PlugSolderingWX5793N1500000
    WXUP MSRTU 032 S MSChisel8501 7/64"1/8"PlugSolderingWX5793N1400000
     
    XNT Series
    WP65, WTP90, WXP651LXRound8501 43/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51700000
    WP65, WTP90, WXP651SCNWChisel8501 1/16"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51900000
    WP65, WTP90, WXP651XRound8501 7/64"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51200000
    WP65, WTP90, WXP65AXChisel8501 7/64"1/16"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51100000
    WP65, WTP90, WXP65HX30° Chisel8501 7/16"1/32"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51800000
    WP65, WTP90, WXP65LChisel8501 15/32"1/8"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51300000
    WP65, WTP90, WXP65SConical8501 15/32"1/64"PlugSolderingWR2, WR3M, WT1, WT1H, WT2M, WX7008A51400000
     
    XT Series
    WP120, WXP120AA 60Bevel8501 29/64"1/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52200000
    WP120, WXP120BB 45Bevel8501 29/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52300000
    WP120, WXP120BSRound8501 29/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52800000
    WP120, WXP120BSCChisel8501 27/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53800000
    WP120, WXP120BSLChisel8501 27/64"3/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53900000
    WP120, WXP120BX30° Chisel8501 13/32"5/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54200000
    WP120, WXP120CC 45Bevel8501 29/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52400000
    WP120, WXP120CSRound8501 29/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52900000
    WP120, WXP120CSLChisel8501 27/64"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54100000
    WP120, WXP120D 4545° Chisel8501 29/64"1/4"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53300000
    WP120, WXP120DLChisel8501 37/64"3/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53600000
    WP120, WXP120DSRound8501 3/8"3/16"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53100000
    WP120, WXP120F 30Bevel8501 29/64"3/64"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53200000
    WP120, WXP120GW1Gullwing8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52600000
    WP120, WXP120GW2Gullwing8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53500000
    WP120, WXP120HChisel8501 29/64"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52700000
    WP120, WXP120HXChisel8501 1/2"1/32"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A53700000
    WP120, WXP120KNKnife8501 49/64"5/64"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A52500000
    WP120, WXP120MXChisel8501 1/2"1/8"PlugSolderingWR2, WR3M, WT1H, WT2M, WX7008A54300000
     
    Tweezer Tips
    Image of Product. 45° Chisel Tweezer. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 45° Chisel Tweezer.
    Image of Product. 45° Conical Tweezer. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, 45° Conical Tweezer.

    45° Chisel Tweezer

    45° Conical Tweezer

    Mfr. Model
    No.
    Tip Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    For Station
    Type
    For Station Manufacturer
    Series
    For Tweezer
    Mfr. Model No.
    Each
    RTW-MS Series
    1MS45° Conical Tweezer85055/64"1/64"DesolderingWXWXMT MS7008A559000000
    2MS45° Chisel Tweezer85055/64"1/32"DesolderingWXWXMT MS7008A56200000
     
    Hot Air Nozzles
    Image of Product. Weller R. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, R Series.

    Weller R

    Point
    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Max. Temp.,
    ° F
    Lg.
    Wd.
    ID
    For Station Type
    For Station Manufacturer
    Series
    Each
    R Series
    HAP200, WXHAP200R041,00041/64"3/64"1/32"Hot Air SolderingWR3M, WXA2, WXsmart5806N16000000
    HAP200, WXHAP200R061,00041/64"3/64"1/64"Hot Air SolderingWR3M, WXA2, WXsmart5806N120000
     
    Weller WXsmart Series Stations
    Image of Product. Soldering. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WXsmart Series, Model Number WXS2012.
    Image of Product. Soldering, Desoldering. Front orientation. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WXsmart Series, Model Number WXS2020.

    Soldering

    Soldering, Desoldering

    Image of Specification. Display. Front orientation. ZoomedIn view. Contains Border. Soldering and Desoldering Stations. Multichannel Soldering and Desoldering Stations, WXsmart Series.
    Image of Specification. Chisel Tip. Front orientation. Chisel. Multichannel Soldering and Desoldering Stations, WXsmart Series.

    Display

    Chisel Tip

    Weller WXsmart stations are Internet of Things (IoT) enabled, so you can control and track your process from the WXSmart app on a smartphone, tablet, or computer. Use either WiFi or a USB cable to connect your device. From the app, you can monitor your process in real time or adjust settings, such as the temperature of the tool and automatic shut-off timing. Each time you solder a joint, these stations log the date and the time spent as well as the operating temperature and model number of the tool. This makes them good for quality control in manufacturing processes, where it’s important to document and repeat what you’ve done.
    Model Number WXS2020—WXS2020 stations come with a module you can attach to turn them into all-in-one soldering, desoldering, and hot air stations. The module has two channels as well as a built-in vacuum and built-in air pump.
    One Desoldering Iron—Desoldering irons heat and suction off solder for precise removal. To prevent solder clogs, they have an in-line collection chamber.
    Tip (Plug
    Connection)
    Nozzle (Plug
    Connection)
    Electrical
    No. of
    Channels
    Station
    Type
    Iron
    Wattage
    Temp. Range,
    ° F
    Wattage,
    W
    Shape
    Point
    Wd.
    Point Wd.
    Point ID
    Tip
    Connection
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Each
    Model Number WXS2012
     
    120V AC
    2Soldering150 W200 to 850300Chisel1/8"——PlugContinuous763Plug InOne Tip
    One Soldering Iron
    One Sponge
    One Scouring Scrubber
    One Soldering Iron Stand
    Tip Holder    		4869N28000000000
     
    Model Number WXS2020
     
    120V AC
    2Soldering
    Desoldering    		150 W
    120 W    		200 to 850300Chisel1/8"3/32", 7/64"3/64", 1/16"—Continuous763Plug InOne Desoldering Iron
    One Desoldering Iron Stand
    One Tip
    One Soldering Iron
    One Soldering Iron Stand
    One WXair Module
    Tip Holder
    Two Nozzles
    Two Scouring Scrubbers
    Two Sponges    		4869N2900000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Soldering Stations.

    For Soldering Stations

    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    For Station
    Type
    Tip
    Connection
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Each
    WXsmartWXUPS MS150200 to 850SolderingPlugRTUS-MSContinuous7Rubber
    		247734A350000000
    Desoldering Irons
    Image of Product. Front orientation. Desoldering Irons. Multichannel Soldering and Desoldering Stations, Weller, Model Number WXDP 120.

    Model Number WXDP 120

    Point
    For Station Manufacturer
    Series
    For Nozzle Manufacturer
    Series
    Wattage,
    W
    Temp. Range,
    ° F
    Wd.
    ID
    Nozzle
    Connection
    Mfr. Model
    No.
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    Each
    WXsmartXDS120200 to 8403/32"1/16"PlugWXDP 120Continuous35Rubber
    		24One Nozzle7327N110000000
    Hot Air Irons
    Image of Product. Front orientation. Soldering Irons. Multichannel Soldering and Desoldering Stations, Weller, For Hot Air Soldering Stations.

    For Hot Air Soldering

    Stations

    Point
    For Station Manufacturer
    Series
    Mfr. Model
    No.
    Wattage,
    W
    Temp. Range,
    ° F
    Airflow,
    ft³/min
    Wd.
    ID
    For Nozzle Manufacturer
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Grip
    Material
    Voltage,
    V AC
    Includes
    For Station Type
    Each
    WXA2, WXsmartWXHAP200200200 to 9900.73/64"1/32"RContinuous45Plastic24One NozzleHot Air Soldering4928N120000000
    Desoldering Tweezers
    Image of Product. Front orientation. Soldering and Desoldering Tweezers. Multichannel Soldering and Desoldering Stations.
    For Station Manufacturer
    Series
    Wattage,
    W
    Temp. Range,
    ° F
    Tip
    Connection
    Mfr. Model
    No.
    For Tip Mfr.
    Series
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Voltage,
    V AC
    Each
    WXsmart150200 to 850PlugWXUTSRTWUSContinuous10247724A170000000
     
    Replacement Stands
    Image of Product. Front orientation. Soldering and Desoldering Iron Stands. Multichannel Soldering and Desoldering Stations.
    For Iron
    Manufacturer
    Model No.
    Wattage,
    W
    Mfr. Model
    No.
    Includes
    Each
    WXDP120200WDH 70One Scouring Scrubber4869N220000000
    Tips
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Chisel.
    Image of Product. Conical. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Conical.

    Chisel

    Conical

    For Iron
    Mfr. Model No.
    Mfr. Model
    No.
    Tip
    Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    RTUS-MS Series
    WXUPS MSRTUS 004 C MSConical8501 5/64"3/64"PlugSolderingWXsmart5793N21000000
    WXUPS MSRTUS 008 C MSConical8501 9/64"3/64"PlugSolderingWXsmart5793N2200000
    WXUPS MSRTUS 016 C MSConical8501 5/64"1/64"PlugSolderingWXsmart5793N2300000
    WXUPS MSRTUS 076 S MSChisel8501 3/32"1/64"PlugSolderingWXsmart5793N2400000
    WXUPS MSRTUS 093 S MSChisel8501 3/32"1/64"PlugSolderingWXsmart5793N2500000
     
    Tweezer Tips
    Image of Product. Chisel Tweezer. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Chisel Tweezer.
    Image of Product. Screwdriver Tweezer. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, Screwdriver Tweezer.

    Chisel Tweezer

    Screwdriver Tweezer

    Mfr. Model
    No.
    Tip Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    For Station
    Type
    For Station Manufacturer
    Series
    For Tweezer
    Mfr. Model No.
    Each
    RTWUS Series
    RTWUS 015 BChisel Tweezer8502"1/16"DesolderingWXsmartWXUTS5793N260000000
    RTWUS 060 KScrewdriver Tweezer8502"15/64"DesolderingWXsmartWXUTS5793N27000000
    RTWUS 200 KScrewdriver Tweezer8502"51/64"DesolderingWXsmartWXUTS5793N28000000
     
    Hot Air Nozzles
    Image of Product. Weller R. Front orientation. Soldering Iron Tips. Multichannel Soldering and Desoldering Stations, R Series.

    Weller R

    Point
    For Iron Mfr.
    Model No.
    Mfr. Model
    No.
    Max. Temp.,
    ° F
    Lg.
    Wd.
    ID
    For Station Type
    For Station Manufacturer
    Series
    Each
    R Series
    HAP200, WXHAP200R041,00041/64"3/64"1/32"Hot Air SolderingWR3M, WXA2, WXsmart5806N16000000
    HAP200, WXHAP200R061,00041/64"3/64"1/64"Hot Air SolderingWR3M, WXA2, WXsmart5806N120000
     
    Desoldering Iron Nozzles
    Image of Product. Weller XDS. Front orientation. Desoldering Iron Tips. Multichannel Soldering and Desoldering Stations, XDS Series.

    Weller XDS

    Point
    For Iron
    Mfr. Model No.
    Mfr. Model
    No.
    Max. Temp.,
    ° F
    Lg.
    Wd.
    ID
    Connection
    End Type
    For Station
    Type
    For Station Manufacturer
    Series
    Each
    XDS Series
    WXDP120XDS 11,00013/32"1/8"1/16"PlugDesolderingWXsmart5806N13000000
     

    Adjustable-Temperature Soldering Stations with Fixed-Temperature Tip

    Image of Product. Front orientation. Soldering and Desoldering Stations. Adjustable-Temperature Soldering Stations with Fixed-Temperature Tip.
    Image of Product. Front orientation. Soldering Iron Heating Elements. Adjustable-Temperature Soldering Stations with Fixed-Temperature Tip.

    Replacement Soldering

    Iron Heating Elements

    These stations are ESD (electrostatic discharge) safe to protect sensitive components. The tip is a fixed temperature—change out the tip to adjust the temperature. One tip is included; additional tips are sold separately.
    Stations
    Replacement Soldering
    Iron Heating Elements
    Tip (Plug
    Connection)
    Electrical
    Wattage,
    W
    Min. Tip
    Temp., ° F
    Max. Tip
    Temp., ° F
    Shape
    Point
    Wd.
    Tip
    Connection
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    No. of
    Blades
    Connection
    Type
    Includes
    Certification
    Each
    Each
     
    120V AC
    60600800Chisel1/16"PlugContinuous2053Plug In60-watt Iron
    700°F Fixed-Temperature Tip
    One Sponge
    Stand    		C-TUV SUD Certified, TUV SUD Certified
    		7718A6100000007718A63000000
     
    Accessories and Replacements for Soldering and Desoldering Stations
    Soldering Irons
    Image of Product. Front orientation. Soldering Irons. Adjustable-Temperature Soldering Stations with Fixed-Temperature Tip.
    Wattage,
    W
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Voltage,
    V AC
    Each
    60Continuous201207718A620000000
    Tips
    Image of Product. Chisel. Front orientation. Soldering Iron Tips. Adjustable-Temperature Soldering Stations with Fixed-Temperature Tip, Chisel Tip.
    Image of Product. Conical. Front orientation. Soldering Iron Tips. Adjustable-Temperature Soldering Stations with Fixed-Temperature Tip, Conical Tip.

    Chisel

    Conical

    Tip
    Shape
    Point
    Wd.
    Choose a Maximum
    Temperature, ° F
    Each
    Chisel3/64"700, 8007008A25000000
    Chisel1/16"700, 8007008A2200000
    Chisel1/8"700, 8007008A2700000
    Chisel3/16"700, 8007008A2800000
    Conical1/32"600, 700, 8007008A2900000
    back to top