Etchers

Filter by

For Use On

Material

Cleaner Type

Color

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Container Type

Power Source

For Removing

Output Current

Cord Length

Output Voltage

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Tip Material

DFARS Specialty Metals

Tip Style

Maximum Number of Lines

Maximum Number of Characters per Line

Container Size

Character Height

Concentration

Number of Blades

Stroke Speed Adjustability

Container Material

Tip Type

357 Products

Etching Pens

These pens contain an acid solution that flows like ink and allows you to write on metal surfaces. Marks are black and smudgeproof.

Tip Style	Cap Style	For Use On		Each
Pointed	Push On	Aluminum, Brass, Bronze, Copper, Iron, Lead, Nickel, Stainless Steel, Steel, Tin	1683T6	000000

Surface-Preparation Cleaners for Concrete Floors

Jug

Remove grease, oil, and dirt from your concrete floors.

Etching Cleaner—Etching cleaners prepare unfinished concrete for coating and patching. Often used in warehouses, light manufacturing facilities, and machine shops, they leave a rough, etched finish for strong coating adhesion. Pour these cleaners onto your floor and scrub with a stiff-bristle brush or broom.

								1 gal. Container
	Type	Solution Type	Approx. Coverage, ft²	Application Temp. Range, ° F	For Use On	For Surface Type	For Removing		Each
Etching Cleaner







				Liquids

				Jug	Water Based	400	60 to 100	Concrete	Unfinished	Dirt, Grease, Oil	94315T6	000000

Mark surfaces with handwritten messages, designs, or logos. Draw your message on a stencil sheet using a scriber or other sharp point, then place the stencil on your metal marking surface. To transfer the message, wet the pad on the etcher with etching solution and press it over the stencil, then touch the grounding wire to your marking surface to activate the solution. Marks are black. Use the included DC voltage adapter clip to make clear and frosted marks.

		Output			Electrical
	Etching Dp.	Current	Voltage	Input Voltage, V AC	Connection	No. of Blades	Cord Lg., ft.	Includes		Each
Iron and Steel



		0.0001" to 0.003"	2 amp	10V AC	120	Straight Blade	2	6	10 Small Stencil Sheets (2 1/4" Ht. × 3" Wd.) Iron and Steel Etching Solution (2-fl. oz. Bottle) Neutralizer Powder Mix (One Pack) One DC Voltage Adapter Clip One Etcher One Grounding Plate	8597T14	0000000


		Aluminum, Brass, Bronze, Copper, Iron, Stainless Steel, and Steel



				0.0001" to 0.003"	2 amp	10V AC	120	Straight Blade	2	6	10 Small Etching Pads (1 3/4" Ht. × 2 1/4" Wd.) 100 Small Stencil Sheets (2 1/4" Ht. × 3" Wd.) 3 Small Etching Grids (7/8" Ht. × 1 3/4" Wd.) Aluminum Etching Solution (8-fl. oz. Bottle) Black Oxide Etching Solution (8-fl. oz. Bottle) Copper, Brass, and Bronze Etching Solution (8-fl. oz. Bottle) Iron and Steel Etching Solution (8-fl. oz. Bottle) Neutralizer (8-fl. oz. Bottle) Neutralizer Powder Mix (One Pack) One DC Voltage Adapter Clip One Etcher One Grounding Plate Plastic Carrying Case Stainless Steel Etching Solution (8-fl. oz. Bottle)	8597T76	000000


				0.0001" to 0.003"	2 amp, 10 amp	10V AC, 15V AC	120	Straight Blade	2	6	100 Small Stencil Sheets (2 1/4" Ht. × 3" Wd.) 5 Medium Stencil Sheets (3-1/2" Ht. x 4 1/4" Wd.) 5 Large Stencil Sheets (4" Ht. × 4 1/2" Wd.) Aluminum Etching Solution (4-fl. oz. Bottle) Black Oxide Etching Solution (4-fl. oz. Bottle) Copper, Brass, and Bronze Etching Solution (4-fl. oz. Bottle) Five Large Etching Pads (4" Ht. × 4 1/4" Wd.) Five Medium Etching Pads (2 1/4" Ht. × 4" Wd.) Iron and Steel Etching Solution (8-fl. oz. Bottle) Neutralizer (8-fl. oz. Bottle) Neutralizer Powder Mix (One Pack) One Grounding Plate One Large Etching Grid (2 1/4" Ht. × 4" Wd.) One Medium Etching Grid (2 1/4" Ht. × 2 1/2" Wd.) One Small Etching Grid (7/8" Ht. × 1 3/4" Wd.) Plastic Carrying Case Stainless Steel Etching Solution (8-fl. oz. Bottle) Two DC Voltage Adapter Clips Two Etchers Two Small Etching Pads (1 3/4" Ht. × 2 1/4" Wd.)	8597T75	000000

Accessories and Replacements for Etchers

Etching Stencil Kits

Cannot Be Sold to Canada—Stencil Kits cannot be sold to Canada because they exceed regulatory limits on mercury.

Includes	Cannot Be Sold To		Each
10 Large Vinyl Stencil Sheets (6" Ht. × 5" Wd.) Developing Tray Digital Timer (Battery Not Included) Exposure Tray Four Developer Sponges Printer Transfer Sheets (Three Each for Inkjet and Laser Printers) Stencil Developer (16-fl. oz. Bottle) Ultraviolet Exposure Unit (12" Ht. × 6" Wd. × 5" Dp., 120V AC, 6-ft. Cord with Two-Prong Plug)	Canada	2807T17	0000000

Ht.	Wd.	Pkg. Qty.		Pkg.
2 1/4"	3"	100	8597T45	000000

Ht.	Wd.	Pkg. Qty.		Pkg.
1 3/4"	2 1/4"	10	8597T36	000000
2 1/4"	4"	10	8597T34	00000
4"	4 1/4"	10	8597T28	00000

Replacement Etching Grids

Etching grids allow precise alignment of your stencil on your marking surface.

Ht.	Wd.	Includes	Pkg. Qty.		Pkg.
7/8"	1 3/4"	—	3	8597T37	000000
—	—	1 Medium Etching Grid (2 1/4" Ht. × 1 3/4" Wd.), 5 Medium Stencil Sheets (3 1/2" Ht. × 4" Wd.), Five Medium Etching Pads (2 1/4" Ht. × 4" Wd.)	1	8597T73	00000
—	—	1 Large Etching Grid (2 1/4" Ht. × 4" Wd.), 5 Large Stencil Sheets (4" Ht. × 4 1/2" Wd.), Five Large Etching Pads (4" Ht. × 4 1/4" Wd.)	1	8597T72	00000

Replacement Etching Solution and Replacement Etching Solution Neutralizers

Replacement Neutralizer Powder Mix (16 fl. oz. Yield)—Neutralizer removes etching solution residue from your metal marking surface after etching.

Replacement Neutralizer (16 fl. oz.)—Neutralizer removes etching solution residue from your metal marking surface after etching.

		Each
Replacement Aluminum Etching Solution (8 fl. oz.)	8597T23	000000
Replacement Iron and Steel Etching Solution (16 fl. oz.)	8597T16	00000
Replacement Black Oxide Etching Solution (8 fl. oz.)	8597T24	00000
Replacement Copper, Brass, and Bronze Etching Solution (16 fl. oz.)	8597T22	00000
Replacement Stainless Steel Etching Solution (16 fl. oz.)	8597T21	00000
Replacement Neutralizer Powder Mix (16 fl. oz. Yield)	8597T39	00000
Replacement Neutralizer (16 fl. oz.)	8597T18	00000

Etching Stencil Kits

Create messages or logos on your computer, then transfer them to stencils for use with an electrochemical etcher. To make a stencil, print your message or logo on a transfer sheet, place it in the ultraviolet exposure unit with a stencil sheet to transfer the image, then soak the stencil sheet in developer to develop the image.

Cannot Be Sold to Canada—Stencil Kits cannot be sold to Canada because they exceed regulatory limits on mercury.

Includes	Cannot Be Sold To		Each
10 Large Vinyl Stencil Sheets (6" Ht. × 5" Wd.) Developing Tray Digital Timer (Battery Not Included) Exposure Tray Four Developer Sponges Printer Transfer Sheets (Three Each for Inkjet and Laser Printers) Stencil Developer (16-fl. oz. Bottle) Ultraviolet Exposure Unit (12" Ht. × 6" Wd. × 5" Dp., 120V AC, 6-ft. Cord with Two-Prong Plug)	Canada	2807T17	0000000

Accessories and Replacements for Etching Stencil Kits

Ht.	Wd.	Material	Pkg. Qty.		Pkg.
2 1/2"	2"	Vinyl Plastic	10	2807T63	000000
4"	4"	Vinyl Plastic	5	2807T65	00000
6"	5"	Vinyl Plastic	5	2807T67	00000

For Printer Type	Ht.	Wd.	Pkg. Qty.		Pkg.
Inkjet	11"	8 1/2"	10	2807T68	000000
Laser	11"	8 1/2"	10	2807T69	00000


Replacement Battery	7604K74	Pkg. of 1	00000
Replacement Stencil Developer (16 fl. oz. Bottle)	2807T61	Each	00000

Nitric Acid

Also known as technical-grade chemicals, industrial-grade chemicals like nitric acid are not suitable for food or medicinal use.

Nitric acid is used for industrial and laboratory applications such as treating wood, pickling and passivating stainless steel, cleaning electronic components, and etching metals.

ACS Reagent Grade—ACS-reagent-grade nitric acid meets quality standards set by the American Chemical Society. ACS-reagent-grade chemicals are also known as Reagent material.

	Container
	Size	Type	Material	Form	CAS No.	Specs. Met		Each
0.3%, Light Viscosity (31 SSU)



		500 ml	Bottle	Plastic	Liquid	7697-37-2	—	3190K957	000000


		4.27%, Light Viscosity (31 SSU)



				500 ml	Bottle	Glass	Liquid	7697-37-2	—	3190K959	00000


				10%, Light Viscosity (31 SSU)



						500 ml	Bottle	Glass	Liquid	7697-37-2	—	3190K964	00000


						20%, Light Viscosity (31 SSU)



								500 ml	Bottle	Glass	Liquid	7697-37-2	—	3190K966	00000


								50%, Light Viscosity (31 SSU)



										500 ml	Bottle	Glass	Liquid	7697-37-2	—	3190K97	00000


										1 L	Bottle	Glass	Liquid	7697-37-2	—	3190K971	000000
										2.5 L	Bottle	Glass	Liquid	7697-37-2	—	3190K972	000000


										70%, Light Viscosity (31 SSU)



												500 ml	Bottle	Glass	Liquid	7697-37-2	ACS Reagent Grade	3190K951	000000


												1 L	Bottle	Glass	Liquid	7697-37-2	ACS Reagent Grade	3190K952	000000
												2.5 L	Bottle	Glass	Liquid	7697-37-2	ACS Reagent Grade	3190K954	000000

Electric Engravers

Plastic Body

Stainless Steel Body

Freehand permanent markings on a variety of materials. These engravers are often used to mark tools and equipment for easy identification and tracking. Adjust the stroke speed to control the depth of your marks. Low stroke speed creates shallow lines and is best for soft materials, such as plastic and wood. High stroke speed creates deep lines and is best for hard materials, such as metal.

Stainless Steel Body—More durable than plastic to stand up to wear over time. These engravers last longer and won’t get damaged in your toolbox.

Carbide—The standard choice for engraving a variety of materials. Carbide tips are hard enough to mark metal and can also be used on plastic and wood.

Steel Tip—Ideal for engraving soft materials, such as plastic, wood, and leather. Steel tips are less durable than carbide tips.

Diamond Tip—The most durable tip material. Diamond tips are the best choice for marking extra-hard materials, such as ceramic, glass, and stone.

	Engravers														Carbide Engraver Tips		Steel Engraver Tips		Diamond Engraver Tips
	Body Material	Max. Strokes per min., stroke/min	Stroke Speed Adjustability	Tip Style	Tip Material	Carbide For Use On	Steel For Use On	Diamond For Use On	Wt., lb.	Cord Lg., ft.	Certification	Includes		Each		Each		Each		Each
Dremel



		Plastic	7,200	Adjustable	Pointed	Carbide	Acrylic Plastic, Aluminum, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood	—	—	0.8	5	UL Listed	0-9 Numeric Stencils, A-Z Character Stencils, Dash Stencil (-), Forward Slash Stencil (/)	1613T1	000000	1613T3	00000	———	0	1613T4	000000


		Plastic	7,200	Adjustable	Pointed	Carbide, Diamond	Acrylic Plastic, Aluminum, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood	—	Acrylic Plastic, Aluminum, Brass, Bronze, Ceramic, Copper, Glass, Iron, Lead, Nickel, Phenolic, Rubber, Steel, Stone, Tin, Wood	0.8	5	UL Listed	0-9 Numeric Stencils, A-Z Character Stencils, Dash Stencil (-), Forward Slash Stencil (/)	1613T2	00000	1613T3	0000	———	0	1613T4	00000


		Other Engravers



				Stainless Steel	7,200	Adjustable	Pointed	Carbide, Steel, Diamond	Acrylic Plastic, Aluminum, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood	Acrylic Plastic, Leather, Rubber, Wood	Acrylic Plastic, Aluminum, Brass, Bronze, Ceramic, Copper, Glass, Iron, Lead, Nickel, Phenolic, Rubber, Steel, Stone, Tin, Wood	0.6	6	—	—	1864T22	000000	1864T24	0000	1864T23	00000	1864T25	00000

Air-Powered Engravers

More powerful than electric engravers, these engravers let you create the same markings in fewer passes and with less effort. Adjust the stroke speed with a continuous dial to control the depth of your marks. Low stroke speed creates shallow lines and is best for soft materials, such as wood and plastic. High stroke speed creates deep lines and is best for hard materials, such as metal. These engravers need lubrication to work properly.

										Hose
Max. Strokes per min., stroke/min	Stroke Speed Adjustability	Tip Material	Tip Style	For Use On	Average Air Consumption @ Pressure	Wt., lb.	Gender	Pipe Size	Thread Type	ID	Lg., ft.		Each



	13,500	Adjustable	Carbide	Pointed	Acrylic Plastic, Aluminum, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood	1.1 ft³/min @ 90 psi	0.3	Male	1/4	NPT	3/16"	8	1564T62	0000000

Accessories and Replacements for Engravers

Engraver Tips


Pointed Tip	Flat Tip

Angled Chisel Tip	Flat Chisel Tip

Carbide Tip—The standard choice for engraving a variety of materials. Carbide tips are hard enough to mark metal and can also be used on plastic and wood.

Steel Tip—A good choice for marking soft materials, such as plastic, wood, and leather. These tips are less durable than carbide tips. They require a tip holder (sold separately).

Flat Tip—Grind these tips into a shape that works for your application.

Angled-Chisel Tip—A great choice for cleaning weld beads.

Flat-Chisel Tip—Best for scaling and deburring.

Tip
Material	Style	For Use On		Each
Carbide	Pointed	Acrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood	1564T68	000000
Steel	Flat	Acrylic Plastic, Leather, Rubber, Wood	1564T74	00000
Steel	Angled Chisel	Acrylic Plastic, Leather, Rubber, Wood	1564T66	00000
Steel	Flat Chisel	Acrylic Plastic, Leather, Rubber, Wood	1564T65	000000

Replacement Hose, Replacement Engraver Tip Holders and Replacement Engraver Filters

		Each
Replacement Air Hose for Adjustable Engravers	1564T69	000000
Replacement Engraver Tip Holder for Adjustable Engravers	1564T64	00000
Replacement Filter for Adjustable Engravers	1564T72	00000

Branding Irons


	1 Line	2 Line

Quickly and uniformly brand your message in wood, leather, and rubber. Marks set in 2 to 6 seconds (allow 15 minutes for the iron to heat up). Movable end locks on each line allow you to vary the number of characters in your message.

Also Available: Made-to-order branding irons. Please ask for 1581T999 and specify character height, characters, and/or logo design.

	Branding Irons												Replacement Character Holders		Replacement Character End Locks
	For Character Ht.	Max. No. of Characters	Branding Head Material	Heating Element Insulation Material	Housing Material	Shaft Material	Voltage, V AC	No. of Blades	Cord Lg., ft.	Features		Each		Each		Each
1 Maximum Line



		3/16" 1/4" 3/8" 1/2"	18 12 9 5	Bronze	Ceramic Fiber	Steel	Stainless Steel	120	3	4 1/2	Built-In Stand, Movable End Locks	1581T47	0000000	1581T25	0000000	1581T151	000000


		3/4" 1"	4 3	Bronze	Ceramic Fiber	Steel	Stainless Steel	120	3	4 1/2	Built-In Stand, Movable End Locks	1581T57	000000	1581T26	000000	1581T155	00000


		2 Maximum Lines



				3/16" 1/4" 3/8" 1/2"	18 12 9 5	Bronze	Ceramic Fiber	Steel	Stainless Steel	120	3	4 1/2	Built-In Stand, Movable End Locks	1581T28	000000	1581T27	000000	1581T151	00000

Accessories and Replacements for Branding Irons

Characters

Characters (sold separately) come individually or as sets. Choose from 0-9, A-Z, comma, period, dash, &, and blank spaces.

	Choose a Character		Each
Brass



	3/16" , 1/4" , 3/8"	0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , A , B , C , D , E , F , G , H , I , J , K , L , M , N , O , P , Q , R , S , T , U , V , W , X , Y , Z , Ampersand (&) , Comma (,) , Dash (-) , Period (.)	1581T75	000000


	3/16" , 1/4" , 3/8"	Blank ( )	1581T253	00000
	1/2" , 3/4"	0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , A , B , C , D , E , F , G , H , I , J , K , L , M , N , O , P , Q , R , S , T , U , V , W , X , Y , Z , Ampersand (&) , Comma (,) , Dash (-) , Period (.)	1581T73	00000
	1/2" , 3/4"	Blank ( )	1581T251	00000
	1"	0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , A , B , C , D , E , F , G , H , I , J , K , L , M , N , O , P , Q , R , S , T , U , V , W , X , Y , Z , Ampersand (&) , Comma (,) , Dash (-) , Period (.)	1581T61	00000
	1"	Blank ( )	1581T149	00000

Character Sets

Characters (sold separately) come individually or as sets. Choose from 0-9, A-Z, comma, period, dash, &, and blank spaces.

	Includes	Choose a Character Height		Each
Number Sets



	Brass	One each of 0-9	3/16" , 1/4" , 3/8"	1581T67	0000000


	Brass	One each of 0-9	1/2" , 3/4"	1581T65	000000
	Brass	One each of 0-9	1"	1581T63	000000


	Letter Sets



			Brass	One each of A-Z	3/16" , 1/4" , 3/8"	1581T66	000000


			Brass	One each of A-Z and Blank ( )	1/2" , 3/4"	1581T64	000000
			Brass	One each of A-Z and Blank ( )	1"	1581T62	000000

Replacement Heat Barriers, Replacement Elements and Temperature Controllers

Temperature Controller—Temperature controllers allow you to adjust the temperature between brands.


Replacement Ceramic Fiber Heating Element Insulation	1581T114	Pkg. of 2
Replacement Heating Element	1581T112	Each
Temperature Controller	1581T11	Each

Scribers for Hardened Steel and Stainless Steel


Straight × Angled Fixed Tip	Straight Fixed Tip Pocket Clip

Straight Retractable Tip	Straight Retractable Tip Pocket Clip

A carbide tip marks hard materials such as hardened steel, stainless steel, and ceramics. It also lasts longer than steel tips on steel and plastics.

Retractable Tip—Retractable tip stays inside the handle for protection when it’s not in use.

Knurled Grip—Knurled grip ensures a secure hold.

Hex Handle—Hex handle shape prevents the scriber from rolling.

Magnet—Scriber with magnet has a magnetic tip on the handle to retrieve ferrous particles from hard-to-reach places.

	Scribers											Replacement Scriber Tips
	Tip				Handle
	Material	Style	Type	Overall Lg.	Material	Grip Texture	Shape	Color	Includes		Each	Pkg. Qty.		Pkg.
For Alloy Steel, Ceramic, Stainless Steel, and Tool Steel



		Carbide	Straight × Angled	Fixed	8"	Aluminum	Smooth	Hex	Blue	—	68085A65	000000	—	———	0


		Carbide	Straight	Fixed	5 1/2"	Aluminum	Knurled	Round	Silver	Pocket Clip	2157A11	0000	3	2157A14	000000
		Carbide	Straight	Fixed	5 1/2"	Aluminum	Knurled	Round	Silver	Pocket Clip, Magnet	2157A12	00000	3	2157A14	00000
		Carbide	Straight	Retractable	3 3/4"	Aluminum	Knurled	Round	Silver	—	6808A15	00000	3	2157A14	00000
		Carbide	Straight	Retractable	6 1/2"	Aluminum	Knurled	Round	Silver	Pocket Clip	1981A51	00000	1	1981A81	00000

Deep Marking Air-Powered Engravers

Our fastest, deepest-cutting handheld engravers create marks that stay crisp and clear, even with wear and tear over time. With 30,000 strokes per minute, they can also make deep markings on hard materials. However, you can’t adjust their high stroke speed, so they may be too fast for shallow marking and engraving legibly on soft materials. These engravers need lubrication to work properly.

Carbide Tip—Hard enough to mark metal and can also be used on plastic and wood.

Engravers														Engraver Tips
										Hose
Max. Strokes per min., stroke/min	Stroke Speed Adjustability	Tip Material	Tip Style	For Use On	Average Air Consumption @ Pressure	Wt., lb.	Gender	Pipe Size	Thread Type	ID	Lg., ft.		Each		Each
30,000	Fixed	Carbide	Pointed	Acrylic Plastic, Aluminum, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood	1.1 ft³/min @ 90 psi	0.3	Female	1/4	NPT	1/8"	6	1602T11	0000000	1602T12	000000

Scribers with Base

Also known as surface gauges, use these to scribe lines, transfer measurements, or as height and depth gauges. They have a V-groove base that can be used on round or flat surfaces.

Gauge pins can be pushed down for use against the edge of a surface plate or T-slot for linear work.

			Mounting Rod		Base
	Tip Style	Scriber Lg.	Lg.	Dia.	Lg.	Wd.	Material	Adjustment Method	Mfr.	Mfr. Model No.		Each
2 Gauge Pins



		Angled	8 1/2"	18"	3/8"	3 3/4"	3 3/8"	Cast Iron	Screw	Starrett	57D	2208A6	0000000


		Curved	6"	12"	5/16"	3"	2 1/2"	Cast Iron	Screw	Starrett	57B	2208A5	000000


		4 Gauge Pins



				Angled	8 1/2"	18"	3/8"	3 1/2"	3 1/4"	Steel	Screw	Starrett	257D	2208A4	000000

Scribers for Steel and Plastic


Straight × Angled Fixed Tip	Straight × Hook Fixed Tip

Straight × Scraper Fixed Tip	Straight Retractable Tip

Use the steel tip on these scribers to mark steel and plastics, or as a pick for cleaning and probing. They have a knurled grip for a secure hold.

Retractable Tip—Retractable tip stays inside the handle for protection when it’s not in use.

	Scribers										Replacement Scriber Tips
	Tip				Handle
	Material	Style	Type	Overall Lg.	Material	Grip Texture	Shape	Color		Each	Pkg. Qty.		Pkg.
For Plastic and Steel



		Steel	Straight × Angled	Fixed	8"	Aluminum	Knurled	Round	Silver	6808A12	00000	—	———	0


		Steel	Straight × Angled	Fixed	8 5/8"	Aluminum	Knurled	Round	Silver	6808A11	0000	1	6808A31	00000
		Steel	Straight × Hook	Fixed	8"	Aluminum	Knurled	Round	Silver	6808A13	0000	—	———	0
		Steel	Straight × Scraper	Fixed	6 1/2"	Steel	Knurled	Round	Silver	19375A11	0000	—	———	0
		Steel	Straight	Retractable	3 3/4"	Aluminum	Knurled	Round	Silver	6808A14	0000	3	6808A32	0000

Air-Powered Engraver Kits

Use these kits for everything from permanently marking materials to cleaning and finishing surfaces. They come with all you need to get started, including an engraver, four types of tips, and a tip holder. The engraver is more powerful than an electric option, so you can make the same markings in fewer passes and with less effort. A continuous dial lets you adjust the stroke speed to control the depth of your marks. Low stroke speed creates shallow lines and is best for soft materials, such as wood and plastic. High stroke speed creates deep lines and is best for hard materials, such as metal. When swapping in another tip style, you must secure it in the engraver with the included tip holder. These engravers need lubrication to work properly.

Carbide Tip—The standard choice for engraving a variety of materials. Carbide tips are hard enough to mark metal and can also be used on plastic and wood.

Steel Tip—Ideal for engraving soft materials, such as plastic, wood, and leather. Steel tips are less durable than carbide tips.

Angled-Chisel Tip—A great choice for cleaning weld beads.

Flat Tip—Grind these tips into a shape that works for your application.

Flat-Chisel Tip—Best for scaling and deburring.

													Hose
Body Material	Max. Strokes per min., stroke/min	Stroke Speed Adjustability	Tip Material	Carbide Tip Style	Carbide For Use On	Steel Tip Style	Steel For Use On	Average Air Consumption @ Pressure	Wt., lb.	Gender	Pipe Size	Thread Type	ID	Lg., ft.	Includes		Each
Aluminum	13,500	Adjustable	Carbide, Steel	Pointed	Acrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood	Angled Chisel, Flat, Flat Chisel	Acrylic Plastic, Leather, Rubber, Wood	1.1 ft³/min @ 90 psi	0.3	Male	1/4	NPT	3/16"	8	Air Filter, Carrying Case, Tip Holder, Replacement Pointed Carbide Tip	1564T63	0000000

Replacements for Engravers

Engraver Tips


Pointed Tip	Flat Tip	Angled Chisel Tip	Flat Chisel Tip

Tip
Material	Style	For Use On		Each
Carbide	Pointed	Acrylic Plastic, Aluminum, Bronze, Iron, Rubber, Stainless Steel, Tin, Wood	1564T68	000000
Steel	Flat	Acrylic Plastic, Leather, Rubber, Wood	1564T74	00000
Steel	Angled Chisel	Acrylic Plastic, Leather, Rubber, Wood	1564T66	00000
Steel	Flat Chisel	Acrylic Plastic, Leather, Rubber, Wood	1564T65	000000

Replacement Hose, Replacement Engraver Tip Holders and Replacement Engraver Filters

		Each
Replacement Air Hose for Adjustable Engravers	1564T69	000000
Replacement Engraver Tip Holder for Adjustable Engravers	1564T64	00000
Replacement Filter for Adjustable Engravers	1564T72	00000

Long-Life Scribers for All Materials

Mark almost any surface including the hardest tool steel and glass. The diamond tip on this scriber lasts longer than carbide tips on hard materials. Tip is retractable, so it stays inside the handle for protection when it’s not in use.

	Scribers											Replacement Scriber Tips
	Tip				Handle
	Material	Style	Type	Overall Lg.	Material	Grip Texture	Shape	Color	Includes		Each		Each
For Alloy Steel, Ceramic, Glass, Plastic, Stainless Steel, Steel, and Tool Steel



		Diamond	Straight	Retractable	5 1/4"	Brass	Smooth	Round	Black	Pocket Clip	1984A16	000000	1984A17	000000

Scriber Sets for Steel and Plastic

Mark steel and plastics or use as picks for cleaning and probing. These sets include a handle with four interchangeable points. The handle has a knurled grip for a secure hold and a hex-shaped handle that prevents rolling.

Magnet—Set with magnet has a magnetic tip on the handle to retrieve ferrous particles from hard-to-reach places.

		Tip				Handle				Container
	No. of Pieces	Material	Style	Type	Overall Lg.	Material	Grip Texture	Shape	Color	Type	Material	Includes		Each
For Plastic and Steel



		5	Steel	Straight, Angled, Hook	Fixed	7 1/2"	Aluminum	Knurled	Hex	Blue	Pouch	Vinyl Plastic	—	68095A69	000000


		5	Steel	Straight, Angled, Hook	Fixed	7 1/2"	Aluminum	Knurled	Hex	Blue	Pouch	Vinyl Plastic	Magnet	68095A68	00000

Straight-Line Scribers

Also known as a marking gauge, this scriber draws precise, straight lines without the need for a straightedge or ruler. Lock the sliding head in place at the desired length and use it as a guide as you drag the scriber along the edge of your work surface.

	Scribers											Replacement Scriber Tips
	Tip				Handle
	Material	Style	Type	Overall Lg.	Material	Shape	Color	Max. Lg. Measured	Graduations (Numeric Graduations)		Each		Each
For Alloy Steel, Plastic, and Stainless Steel



		Steel	Straight	Fixed	12"	Nickel-Plated Steel	Rectangle	Silver	6 1/2"	1/8" (1/8")	2011A3	000000	2011A31	00000