Filter by
Fitting Type
Fitting Connection
For Use With
Bolt Hole Type
Maximum Pressure @ Temperature
Expansion Joint Type
DFARS Specialty Metals
Maximum Vacuum @ Temperature
Pipe Expansion Joints with Flanged Ends
 |
Shown Installed on a Flanged Pipe |
These joints reduce stress, vibration, and noise in piping systems by providing a point of flexibility to absorb movement. The flanged ends rotate for easy bolt hole alignment during installation. They mate with a same-size flat-surface Class 150 flange without the need for a gasket. Joints have a flexible body that is reinforced with nylon for added strength.
Position the expansion joints as close as possible to anchor points.
Neoprene
 |  |
Expansion Joint | Limit Rod |
Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
Pipe Expansion Joints | Limit Rod Sets | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance | Threaded Bolt Holes | Unthreaded Bolt Holes | ||||||||||||||||||||
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | Reinforcement Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | Bolt Hole Thread Size | Each | For Bolt Dia. | Each | Pair | ||||
| 5" | 1 1/2 | 6" | 4 | 1/2" | 3/8" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 1/2"-13 | 9175K32 | 000000 | 5/8" | 9175K13 | 000000 | 9175K82 | 0000000 | |
| 6" | 2 | 6" | 4 | 1/2" | 3/8" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 5/8"-11 | 9175K33 | 000000 | 3/4" | 9175K14 | 000000 | 9175K83 | 000000 | |
| 7" | 2 1/2 | 6" | 4 | 1/2" | 3/8" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 5/8"-11 | 9175K34 | 000000 | 3/4" | 9175K15 | 000000 | 9175K84 | 000000 | |
| 7 1/2" | 3 | 6" | 4 | 1/2" | 3/8" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 5/8"-11 | 9175K35 | 000000 | 3/4" | 9175K16 | 000000 | 9175K85 | 000000 | |
| 9" | 4 | 6" | 8 | 3/4" | 1/2" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 5/8"-11 | 9175K36 | 000000 | 3/4" | 9175K17 | 000000 | 9175K86 | 000000 | |
| 10" | 5 | 6" | 8 | 3/4" | 1/2" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 3/4"-10 | 9175K37 | 000000 | 7/8" | 9175K18 | 000000 | 9175K87 | 000000 | |
| 11" | 6 | 6" | 8 | 3/4" | 1/2" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 3/4"-10 | 9175K38 | 000000 | 7/8" | 9175K19 | 000000 | 9175K88 | 000000 | |
| 13 1/2" | 8 | 6" | 8 | 3/4" | 1/2" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 3/4"-10 | 9175K39 | 000000 | 7/8" | 9175K23 | 000000 | 9175K89 | 000000 | |
| 16" | 10 | 8" | 12 | 1" | 5/8" | 3/4" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 7/8"-9 | 9175K21 | 000000 | 1" | 9175K24 | 000000 | 9175K91 | 000000 | |
| 19" | 12 | 8" | 12 | 1" | 5/8" | 3/4" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 7/8"-9 | 9175K22 | 000000 | 1" | 9175K25 | 000000 | 9175K92 | 000000 | |
EPDM
| |
Expansion Joint | Limit Rod |
Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
Pipe Expansion Joints | Limit Rod Sets | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance | Unthreaded Bolt Holes | ||||||||||||||||||
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | Reinforcement Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | For Bolt Dia. | Each | Pair | |||
| 5" | 1 1/2 | 6" | 4 | 1/2" | 3/8" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 5/8" | 9175K52 | 000000 | 9175K82 | 0000000 | |
| 6" | 2 | 6" | 4 | 1/2" | 3/8" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 9175K53 | 000000 | 9175K83 | 000000 | |
| 7" | 2 1/2 | 6" | 4 | 1/2" | 3/8" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 9175K54 | 000000 | 9175K84 | 000000 | |
| 7 1/2" | 3 | 6" | 4 | 1/2" | 3/8" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 9175K55 | 000000 | 9175K85 | 000000 | |
| 9" | 4 | 6" | 8 | 3/4" | 1/2" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 9175K56 | 000000 | 9175K86 | 000000 | |
| 10" | 5 | 6" | 8 | 3/4" | 1/2" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 7/8" | 9175K57 | 000000 | 9175K87 | 000000 | |
| 11" | 6 | 6" | 8 | 3/4" | 1/2" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 7/8" | 9175K58 | 000000 | 9175K88 | 000000 | |
| 13 1/2" | 8 | 6" | 8 | 3/4" | 1/2" | 1/2" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 7/8" | 9175K59 | 000000 | 9175K89 | 000000 | |
| 16" | 10 | 8" | 12 | 1" | 5/8" | 3/4" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 1" | 9175K61 | 000000 | 9175K91 | 000000 | |
| 19" | 12 | 8" | 12 | 1" | 5/8" | 3/4" | 220 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 1" | 9175K62 | 000000 | 9175K92 | 000000 | |
High-Temperature All-Metal Pipe Expansion Joints with Flanged Ends
304 Stainless Steel
 |
Expansion Joint Liners—Liners (sold separately) slide into the expansion joint to provide a smooth interior for unrestricted flow.
Pipe Expansion Joints | Expansion Joint Liners | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance | Unthreaded Bolt Holes | |||||||||||||||||
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | Bolt Hole Size | Each | Each | |||
| 6" | 2 | 6" | 4 | 15/16" | 5/16" | 3/8" | 150 psi @ 72° F | Bellow | Steel | Air, Natural Gas, Oil, Steam, Water | -20 to 800 | 29 in. Hg @ 72° F | 3/4" | 9413K61 | 0000000 | 9413K41 | 0000000 | |
| 7" | 2 1/2 | 6" | 4 | 15/16" | 5/16" | 5/16" | 150 psi @ 72° F | Bellow | Steel | Air, Natural Gas, Oil, Steam, Water | -20 to 800 | 29 in. Hg @ 72° F | 3/4" | 9413K62 | 000000 | 9413K42 | 000000 | |
| 7 1/2" | 3 | 6" | 4 | 15/16" | 5/16" | 1/4" | 150 psi @ 72° F | Bellow | Steel | Air, Natural Gas, Oil, Steam, Water | -20 to 800 | 29 in. Hg @ 72° F | 3/4" | 9413K63 | 000000 | 9413K43 | 000000 | |
| 9" | 4 | 6" | 8 | 15/16" | 5/16" | 3/16" | 150 psi @ 72° F | Bellow | Steel | Air, Natural Gas, Oil, Steam, Water | -20 to 800 | 29 in. Hg @ 72° F | 3/4" | 9413K64 | 000000 | 9413K44 | 000000 | |
| 10" | 5 | 6" | 8 | 15/16" | 5/16" | 3/16" | 150 psi @ 72° F | Bellow | Steel | Air, Natural Gas, Oil, Steam, Water | -20 to 800 | 29 in. Hg @ 72° F | 7/8" | 9413K65 | 000000 | 9413K45 | 000000 | |
| 11" | 6 | 6" | 8 | 15/16" | 5/16" | 1/8" | 150 psi @ 72° F | Bellow | Steel | Air, Natural Gas, Oil, Steam, Water | -20 to 800 | 29 in. Hg @ 72° F | 7/8" | 9413K66 | 000000 | 9413K46 | 000000 | |
| 13 1/2" | 8 | 6" | 8 | 1" | 3/8" | 1/8" | 150 psi @ 72° F | Bellow | Steel | Air, Natural Gas, Oil, Steam, Water | -20 to 800 | 29 in. Hg @ 72° F | 7/8" | 9413K67 | 00000000 | 9413K47 | 000000 | |
| 16" | 10 | 8" | 12 | 1 1/4" | 3/8" | 1/8" | 150 psi @ 72° F | Bellow | Steel | Air, Natural Gas, Oil, Steam, Water | -20 to 800 | 29 in. Hg @ 72° F | 1" | 9413K68 | 00000000 | 9413K48 | 000000 | |
| 19" | 12 | 8" | 12 | 1 1/4" | 3/8" | 1/8" | 150 psi @ 72° F | Bellow | Steel | Air, Natural Gas, Oil, Steam, Water | -20 to 800 | 29 in. Hg @ 72° F | 1" | 9413K69 | 00000000 | 9413K49 | 000000 | |
Chemical-Resistant Pipe Expansion Joints with Flanged Ends
Ultra-Corrosion-Resistant-Coated PTFE
 |
Distance | Threaded Bolt Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | Bolt Hole Thread Size | Each | ||
| 5" | 1 1/2 | 2" | 4 | 1/2" | 1/2" | 1/4" | 130 psi @ 72° F | Triple Bulb | Iron | Coolant, Hydrochloric Acid, Water | 0 to 400 | 29 in. Hg @ 72° F | 1/2"-13 | 3501K81 | 0000000 | |
| 6" | 2 | 2 3/4" | 4 | 3/4" | 3/4" | 3/8" | 130 psi @ 72° F | Triple Bulb | Iron | Coolant, Hydrochloric Acid, Water | 0 to 400 | 29 in. Hg @ 72° F | 5/8"-11 | 3501K82 | 000000 | |
| 7" | 2 1/2 | 3 3/16" | 4 | 3/4" | 3/4" | 3/8" | 130 psi @ 72° F | Triple Bulb | Iron | Coolant, Hydrochloric Acid, Water | 0 to 400 | 29 in. Hg @ 72° F | 5/8"-11 | 3501K83 | 00000000 | |
| 7 1/2" | 3 | 3 5/8" | 4 | 1" | 1" | 1/2" | 130 psi @ 72° F | Triple Bulb | Iron | Coolant, Hydrochloric Acid, Water | 0 to 400 | 29 in. Hg @ 72° F | 5/8"-11 | 3501K84 | 00000000 | |
| 9" | 4 | 3 5/8" | 8 | 1" | 1" | 1/2" | 130 psi @ 72° F | Triple Bulb | Iron | Coolant, Hydrochloric Acid, Water | 0 to 400 | 29 in. Hg @ 72° F | 5/8"-11 | 3501K85 | 00000000 | |
| 11" | 6 | 4" | 8 | 1 1/8" | 1 1/8" | 9/16" | 130 psi @ 72° F | Triple Bulb | Iron | Coolant, Hydrochloric Acid, Water | 0 to 400 | 29 in. Hg @ 72° F | 3/4"-10 | 3501K87 | 00000000 | |
| 13 1/2" | 8 | 6" | 8 | 1 1/8" | 1 1/8" | 9/16" | 120 psi @ 72° F | Triple Bulb | Iron | Coolant, Hydrochloric Acid, Water | 0 to 400 | 29 in. Hg @ 72° F | 3/4"-10 | 3501K58 | 00000000 | |
Pipe Expansion Joints with Sealing Flanged Ends for Metal Pipe
 |
Shown Installed on a Flanged Pipe |
Because the flanges are molded into the body for a wide sealing surface, these joints provide a tighter seal than other expansion joints. Each flange is supported by a zinc-plated steel plate. Flanges mate with a same-size flat-surface Class 150 flange without the need for a gasket. Joints reduce stress, vibration, and noise in metal piping systems by providing a point of flexibility to absorb movement. They have a flexible body that is reinforced with cord for added strength.
Mount these expansion joints as close as possible to anchor points.
Neoprene with Buna-N Liner
 | |
Expansion Joint | Limit Rod |
Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
Pipe Expansion Joints | Limit Rod Sets | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance | Unthreaded Bolt Holes | ||||||||||||||||||
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | Reinforcement Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | Bolt Hole Size | Each | Pair | |||
| 6" | 2 | 6" | 4 | 1 1/4" | 5/8" | 9/16" | 210 psi @ 72° F | Single Bulb | Neoprene | Metal, Yarn | Coolant, Grease, Hydraulic Fluid, Water | -65 to 220 | 29 in. Hg @ 72° F | 3/4" | 4528K52 | 0000000 | 9175K83 | 0000000 | |
| 7" | 2 1/2 | 6" | 4 | 1 1/4" | 5/8" | 9/16" | 210 psi @ 72° F | Single Bulb | Neoprene | Metal, Yarn | Coolant, Grease, Hydraulic Fluid, Water | -65 to 220 | 29 in. Hg @ 72° F | 3/4" | 4528K53 | 000000 | 9175K84 | 000000 | |
| 7 1/2" | 3 | 6" | 4 | 1 1/4" | 5/8" | 9/16" | 210 psi @ 72° F | Single Bulb | Neoprene | Metal, Yarn | Coolant, Grease, Hydraulic Fluid, Water | -65 to 220 | 29 in. Hg @ 72° F | 3/4" | 4528K54 | 000000 | 9175K85 | 000000 | |
| 9" | 4 | 6" | 8 | 1 1/4" | 5/8" | 9/16" | 210 psi @ 72° F | Single Bulb | Neoprene | Metal, Yarn | Coolant, Grease, Hydraulic Fluid, Water | -65 to 220 | 29 in. Hg @ 72° F | 3/4" | 4528K55 | 000000 | 9175K86 | 000000 | |
| 10" | 5 | 6" | 8 | 1 1/4" | 5/8" | 9/16" | 210 psi @ 72° F | Single Bulb | Neoprene | Metal, Yarn | Coolant, Grease, Hydraulic Fluid, Water | -65 to 220 | 29 in. Hg @ 72° F | 7/8" | 4528K56 | 000000 | 9175K87 | 000000 | |
| 11" | 6 | 6" | 8 | 1 1/4" | 5/8" | 9/16" | 210 psi @ 72° F | Single Bulb | Neoprene | Metal, Yarn | Coolant, Grease, Hydraulic Fluid, Water | -65 to 220 | 29 in. Hg @ 72° F | 7/8" | 4528K57 | 000000 | 9175K88 | 000000 | |
| 13 1/2" | 8 | 6" | 8 | 1 1/4" | 5/8" | 9/16" | 210 psi @ 72° F | Single Bulb | Neoprene | Metal, Yarn | Coolant, Grease, Hydraulic Fluid, Water | -65 to 220 | 29 in. Hg @ 72° F | 7/8" | 4528K58 | 000000 | 9175K89 | 000000 | |
Neoprene
| |
Expansion Joint | Limit Rod |
Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
Pipe Expansion Joints | Limit Rod Sets | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance | Unthreaded Bolt Holes | ||||||||||||||||||
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | Reinforcement Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | Bolt Hole Size | Each | Pair | |||
| 6" | 2 | 6" | 4 | 1 1/4" | 5/8" | 9/16" | 190 psi @ 72° F | Single Bulb | Neoprene | Metal, Polyester Plastic | Grain Alcohol, Nonabrasive Slurries, Water | -20 to 220 | 26 in. Hg @ 72° F | 3/4" | 4528K82 | 0000000 | 9175K83 | 0000000 | |
| 7" | 2 1/2 | 6" | 4 | 1 1/4" | 5/8" | 9/16" | 190 psi @ 72° F | Single Bulb | Neoprene | Metal, Polyester Plastic | Grain Alcohol, Nonabrasive Slurries, Water | -20 to 220 | 26 in. Hg @ 72° F | 3/4" | 4528K83 | 000000 | 9175K84 | 000000 | |
| 7 1/2" | 3 | 6" | 4 | 1 1/4" | 5/8" | 9/16" | 190 psi @ 72° F | Single Bulb | Neoprene | Metal, Polyester Plastic | Grain Alcohol, Nonabrasive Slurries, Water | -20 to 220 | 26 in. Hg @ 72° F | 3/4" | 4528K84 | 000000 | 9175K85 | 000000 | |
| 9" | 4 | 6" | 8 | 1 1/4" | 5/8" | 9/16" | 190 psi @ 72° F | Single Bulb | Neoprene | Metal, Polyester Plastic | Grain Alcohol, Nonabrasive Slurries, Water | -20 to 220 | 26 in. Hg @ 72° F | 3/4" | 4528K85 | 000000 | 9175K86 | 000000 | |
| 11" | 6 | 6" | 8 | 1 1/4" | 5/8" | 9/16" | 190 psi @ 72° F | Single Bulb | Neoprene | Metal, Polyester Plastic | Grain Alcohol, Nonabrasive Slurries, Water | -20 to 220 | 26 in. Hg @ 72° F | 7/8" | 4528K87 | 000000 | 9175K88 | 000000 | |
| 13 1/2" | 8 | 6" | 8 | 1 1/4" | 5/8" | 9/16" | 190 psi @ 72° F | Single Bulb | Neoprene | Metal, Polyester Plastic | Grain Alcohol, Nonabrasive Slurries, Water | -20 to 220 | 26 in. Hg @ 72° F | 7/8" | 4528K88 | 000000 | 9175K89 | 000000 | |
Pipe Expansion Joints with Flanged Ends for High Vibration
 |
Shown Installed on a Flanged Pipe |
These expansion joints have a double-bulb design for extra movement and vibration absorption. The flanged ends rotate for easy bolt hole alignment during installation. They mate with a same-size flat-surface Class 150 flange without the need for a gasket. Joints have a flexible body that is reinforced with nylon for added strength.
Neoprene
 |  |
Expansion Joint | Limit Rod |
Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
Pipe Expansion Joints | Limit Rod Sets | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance | Threaded Bolt Holes | Unthreaded Bolt Holes | ||||||||||||||||||||
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | Reinforcement Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | Bolt Hole Thread Size | Each | Bolt Hole Size | Each | Pair | ||||
| 5" | 1 1/2 | 7" | 4 | 2" | 1 3/16" | 1 3/4" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Grain Alcohol, Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 1/2"-13 | 6819K61 | 0000000 | 5/8" | 6819K26 | 0000000 | 6819K72 | 000000 | |
| 6" | 2 | 7" | 4 | 2" | 1 3/16" | 1 3/4" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Grain Alcohol, Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 5/8"-11 | 6819K62 | 000000 | 3/4" | 6819K27 | 000000 | 6819K73 | 00000 | |
| 7" | 2 1/2 | 7" | 4 | 2" | 1 3/16" | 1 3/4" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Grain Alcohol, Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 5/8"-11 | 6819K63 | 000000 | 3/4" | 6819K28 | 000000 | 6819K74 | 00000 | |
| 7 1/2" | 3 | 7" | 4 | 2" | 1 3/16" | 1 3/4" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Grain Alcohol, Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 5/8"-11 | 6819K64 | 000000 | 3/4" | 6819K29 | 000000 | 6819K75 | 00000 | |
| 9" | 4 | 9" | 8 | 2" | 1 3/8" | 1 9/16" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Grain Alcohol, Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 5/8"-11 | 6819K65 | 000000 | 3/4" | 6819K31 | 000000 | 6819K76 | 00000 | |
| 10" | 5 | 9" | 8 | 2" | 1 3/8" | 1 9/16" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Grain Alcohol, Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 3/4"-10 | 6819K66 | 000000 | 7/8" | 6819K52 | 000000 | 6819K77 | 000000 | |
| 11" | 6 | 9" | 8 | 2" | 1 3/8" | 1 9/16" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Grain Alcohol, Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 3/4"-10 | 6819K67 | 000000 | 7/8" | 6819K53 | 000000 | 6819K78 | 000000 | |
| 13 1/2" | 8 | 13" | 8 | 2 3/8" | 1 3/8" | 1 3/8" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Grain Alcohol, Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 3/4"-10 | 6819K68 | 000000 | 7/8" | 6819K54 | 000000 | 6819K79 | 000000 | |
| 16" | 10 | 13" | 12 | 2 3/8" | 1 3/8" | 1 3/8" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Grain Alcohol, Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 7/8"-9 | 6819K69 | 000000 | 1" | 6819K55 | 000000 | 6819K92 | 000000 | |
| 19" | 12 | 13" | 12 | 2 3/8" | 1 3/8" | 1 3/8" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Grain Alcohol, Nonabrasive Slurries, Water | -10 to 220 | 26 in. Hg @ 72° F | 7/8"-9 | 6819K71 | 00000000 | 1" | 6819K56 | 00000000 | 6819K93 | 000000 | |
EPDM
| |
Expansion Joint | Limit Rod |
Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
Pipe Expansion Joints | Limit Rod Sets | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance | Unthreaded Bolt Holes | ||||||||||||||||||
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | Reinforcement Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | Bolt Hole Size | Each | Pair | |||
| 5" | 1 1/2 | 7" | 4 | 2" | 1 3/16" | 1 3/4" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 5/8" | 6819K81 | 0000000 | 6819K72 | 000000 | |
| 6" | 2 | 7" | 4 | 2" | 1 3/16" | 1 3/4" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 6819K82 | 000000 | 6819K73 | 00000 | |
| 7" | 2 1/2 | 7" | 4 | 2" | 1 3/16" | 1 3/4" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 6819K83 | 000000 | 6819K74 | 00000 | |
| 7 1/2" | 3 | 7" | 4 | 2" | 1 3/16" | 1 3/4" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 6819K84 | 000000 | 6819K75 | 00000 | |
| 9" | 4 | 9" | 8 | 2" | 1 3/8" | 1 9/16" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 6819K85 | 000000 | 6819K76 | 00000 | |
| 10" | 5 | 9" | 8 | 2" | 1 3/8" | 1 9/16" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 7/8" | 6819K86 | 000000 | 6819K77 | 000000 | |
| 11" | 6 | 9" | 8 | 2" | 1 3/8" | 1 9/16" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 7/8" | 6819K87 | 000000 | 6819K78 | 000000 | |
| 13 1/2" | 8 | 13" | 8 | 2 3/8" | 1 3/8" | 1 3/8" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 7/8" | 6819K88 | 000000 | 6819K79 | 000000 | |
| 16" | 10 | 13" | 12 | 2 3/8" | 1 3/8" | 1 3/8" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 1" | 6819K89 | 000000 | 6819K92 | 000000 | |
| 19" | 12 | 13" | 12 | 2 3/8" | 1 3/8" | 1 3/8" | 220 psi @ 72° F | Double Bulb | Zinc-Plated Steel | Nylon | Alcohol, Water | -20 to 250 | 26 in. Hg @ 72° F | 1" | 6819K91 | 00000000 | 6819K93 | 000000 | |
Pipe Expansion Joints with Sealing Flanged Ends for Plastic Pipe
 |
Shown Installed on a Flanged Pipe |
These joints reduce stress, vibration, and noise in plastic piping systems by providing a point of flexibility to absorb movement. Joints provide a tighter seal than other expansion joints because the flanges are molded into the body for a wide sealing surface. Each flange is supported by a zinc-plated steel plate. Flanges mate with a same-size flat-surface Class 150 flange without the need for a gasket.
Position the expansion joints as close as possible to anchor points.
Neoprene with Buna-N Liner
 | |
Expansion Joint | Limit Rod |
Neoprene joints resist abrasion better than EPDM joints.
Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
Pipe Expansion Joints | Limit Rod Sets | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance | Unthreaded Bolt Holes | ||||||||||||||||||
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | Reinforcement Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | Bolt Hole Size | Each | Pair | |||
| 5" | 1 1/2 | 6" | 4 | 1 1/2" | 5/8" | 3/4" | 225 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Natural Gas, Oil, Water | -10 to 220 | 24 in. Hg @ 72° F | 5/8" | 4528K21 | 0000000 | 9175K82 | 0000000 | |
| 6" | 2 | 6" | 4 | 1 1/2" | 5/8" | 3/4" | 225 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Natural Gas, Oil, Water | -10 to 220 | 24 in. Hg @ 72° F | 3/4" | 4528K22 | 000000 | 9175K83 | 000000 | |
| 7 1/2" | 3 | 6" | 4 | 1 1/2" | 5/8" | 3/4" | 225 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Natural Gas, Oil, Water | -10 to 220 | 24 in. Hg @ 72° F | 3/4" | 4528K23 | 000000 | 9175K85 | 000000 | |
| 9" | 4 | 6" | 8 | 1 1/2" | 5/8" | 3/4" | 225 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Natural Gas, Oil, Water | -10 to 220 | 24 in. Hg @ 72° F | 3/4" | 4528K24 | 000000 | 9175K86 | 000000 | |
| 11" | 6 | 6" | 8 | 1 1/2" | 5/8" | 3/4" | 210 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Natural Gas, Oil, Water | -10 to 220 | 24 in. Hg @ 72° F | 7/8" | 4528K25 | 000000 | 9175K88 | 000000 | |
| 13 1/2" | 8 | 6" | 8 | 1 1/2" | 5/8" | 3/4" | 210 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Natural Gas, Oil, Water | -10 to 220 | 24 in. Hg @ 72° F | 7/8" | 4528K26 | 000000 | 9175K89 | 000000 | |
EPDM
| |
Expansion Joint | Limit Rod |
Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
Pipe Expansion Joints | Limit Rod Sets | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance | Unthreaded Bolt Holes | |||||||||||||||||
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | Bolt Hole Size | Each | Pair | |||
| 5" | 1 1/2 | 6" | 4 | 1 1/4" | 5/8" | 9/16" | 220 psi @ 72° F | Single Bulb | EPDM | Alcohol, Water | -20 to 250 | 24 in. Hg @ 72° F | 5/8" | 4528K41 | 0000000 | 9175K82 | 0000000 | |
| 6" | 2 | 6" | 4 | 1 1/4" | 5/8" | 9/16" | 220 psi @ 72° F | Single Bulb | EPDM | Alcohol, Water | -20 to 250 | 24 in. Hg @ 72° F | 3/4" | 4528K42 | 000000 | 9175K83 | 000000 | |
| 7" | 2 1/2 | 6" | 4 | 1 1/4" | 5/8" | 9/16" | 220 psi @ 72° F | Single Bulb | EPDM | Alcohol, Water | -20 to 250 | 24 in. Hg @ 72° F | 3/4" | 4528K43 | 000000 | 9175K84 | 000000 | |
| 7 1/2" | 3 | 6" | 4 | 1 1/4" | 5/8" | 9/16" | 220 psi @ 72° F | Single Bulb | EPDM | Alcohol, Water | -20 to 250 | 24 in. Hg @ 72° F | 3/4" | 4528K44 | 000000 | 9175K85 | 000000 | |
| 9" | 4 | 6" | 8 | 1 1/4" | 5/8" | 9/16" | 220 psi @ 72° F | Single Bulb | EPDM | Alcohol, Water | -20 to 250 | 24 in. Hg @ 72° F | 3/4" | 4528K45 | 000000 | 9175K86 | 000000 | |
| 11" | 6 | 6" | 8 | 1 1/4" | 5/8" | 9/16" | 220 psi @ 72° F | Single Bulb | EPDM | Alcohol, Water | -20 to 250 | 24 in. Hg @ 72° F | 7/8" | 4528K46 | 000000 | 9175K88 | 000000 | |
| 13 1/2" | 8 | 6" | 8 | 1 1/4" | 5/8" | 9/16" | 220 psi @ 72° F | Single Bulb | EPDM | Alcohol, Water | -20 to 250 | 24 in. Hg @ 72° F | 7/8" | 4528K47 | 000000 | 9175K89 | 000000 | |
Pipe Expansion Joints with Flanged Ends for Drinking Water
 |
Shown Installed on a Flanged Pipe |
The EPDM lining in these joints meets NSF/ANSI 61 standard for use with drinking water. To reduce stress, vibration, and noise in piping systems, they provide a point of flexibility to absorb movement. These joints have a flexible body reinforced with polyester plastic cord for added strength. A zinc-plated steel plate supports each flange. The flanges mate with the same-size flat-surface Class 150 flange without the need for a gasket.
Position the expansion joints as close as possible to anchor points.
EPDM with EPDM Liner
 | |
Expansion Joint | Limit Rod |
Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
Pipe Expansion Joints | Limit Rod Sets | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance | Unthreaded Bolt Holes | |||||||||||||||||||
Flange OD | Pipe Size | Lg. | No. of Bolt Holes | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | Reinforcement Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | Food Industry Std. | Bolt Hole Size | Each | Pair | |||
| 5" | 1 1/2 | 6" | 4 | 3/4" | 3/8" | 1/2" | 200 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Drinking Water | -20 to 250 | 26 in. Hg @ 72° F | NSF/ANSI 61 | 5/8" | 5304N18 | 0000000 | 9175K82 | 0000000 | |
| 6" | 2 | 6" | 4 | 1 3/8" | 3/4" | 5/8" | 200 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Drinking Water | -20 to 250 | 26 in. Hg @ 72° F | NSF/ANSI 61 | 3/4" | 5304N19 | 000000 | 9175K83 | 000000 | |
| 7" | 2 1/2 | 6" | 4 | 1 3/8" | 3/4" | 5/8" | 200 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Drinking Water | -20 to 250 | 26 in. Hg @ 72° F | NSF/ANSI 61 | 3/4" | 5304N21 | 000000 | 9175K84 | 000000 | |
| 7 1/2" | 3 | 6" | 4 | 1 3/8" | 3/4" | 5/8" | 200 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Drinking Water | -20 to 250 | 26 in. Hg @ 72° F | NSF/ANSI 61 | 3/4" | 5304N22 | 000000 | 9175K85 | 000000 | |
| 9" | 4 | 6" | 8 | 1 3/8" | 3/4" | 5/8" | 200 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Drinking Water | -20 to 250 | 26 in. Hg @ 72° F | NSF/ANSI 61 | 3/4" | 5304N23 | 000000 | 9175K86 | 000000 | |
| 11" | 6 | 6" | 8 | 1 5/8" | 3/4" | 3/4" | 190 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Drinking Water | -20 to 250 | 26 in. Hg @ 72° F | NSF/ANSI 61 | 7/8" | 5304N24 | 00000000 | 9175K88 | 000000 | |
| 13 1/2" | 8 | 6" | 8 | 1 5/8" | 3/4" | 3/4" | 190 psi @ 72° F | Single Bulb | Zinc-Plated Steel | Polyester Plastic | Drinking Water | -20 to 250 | 26 in. Hg @ 72° F | NSF/ANSI 61 | 7/8" | 5304N25 | 00000000 | 9175K89 | 000000 | |
Pipe Expansion Joint Reducers with Flanged Ends
 |
Shown Installed on a Flanged Pipe |
 |
Connect different pipe sizes in your line while adding a point of flexibility between them. These expansion joints absorb movement between two connected pipes to reduce stress, vibration, and noise. Their flanged ends mate with same-size Class 150 flanges without the need for a gasket. Each flange is supported by a zinc-plated steel plate. The body of these expansion joints is reinforced with cord for added strength.
Your pipe system must be rigidly anchored on both sides of the expansion joint to control expansion or contraction of the line. When proper anchoring cannot be provided, limit rods (sold separately) are required.
EPDM
Unthreaded Bolt Holes | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange OD | Pipe Size | No. of Bolt Holes | Distance | Bolt Hole Size | ||||||||||||||||
(A) | (B) | (A) | (B) | Lg. | (A) | (B) | Compression | Expansion | Offset | Max. Pressure @ Temp. | Expansion Joint Type | Flange Material | For Use With | Temp. Range, ° F | Max. Vacuum @ Temp. | (A) | (B) | Each | ||
| 6" | 4 1/4" | 2 | 1 | 8" | 4 | 4 | 1" | 1/2" | 1/2" | 200 psi @ 72° F | Single Bulb | EPDM | Grain Alcohol, Air, Alcohol, Calcium Chloride, Coolant, Grease, Hydraulic Fluid, Sodium Carbonate (Soda Ash), Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 5/8" | 4983N11 | 0000000 | |
| 6" | 5" | 2 | 1 1/2 | 8" | 4 | 4 | 1" | 1/2" | 1/2" | 200 psi @ 72° F | Single Bulb | EPDM | Grain Alcohol, Air, Alcohol, Calcium Chloride, Coolant, Grease, Hydraulic Fluid, Sodium Carbonate (Soda Ash), Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 5/8" | 4983N12 | 000000 | |
| 7 1/2" | 6" | 3 | 2 | 8" | 4 | 4 | 1 3/8" | 11/16" | 1/2" | 200 psi @ 72° F | Single Bulb | EPDM | Grain Alcohol, Air, Alcohol, Calcium Chloride, Coolant, Grease, Hydraulic Fluid, Sodium Carbonate (Soda Ash), Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 3/4" | 4983N13 | 000000 | |
| 9" | 6" | 4 | 2 | 8" | 8 | 4 | 1 3/8" | 11/16" | 1/2" | 200 psi @ 72° F | Single Bulb | EPDM | Grain Alcohol, Air, Alcohol, Calcium Chloride, Coolant, Grease, Hydraulic Fluid, Sodium Carbonate (Soda Ash), Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 3/4" | 4983N14 | 000000 | |
| 9" | 7 1/2" | 4 | 3 | 8" | 8 | 4 | 1 3/8" | 11/16" | 1/2" | 200 psi @ 72° F | Single Bulb | EPDM | Grain Alcohol, Air, Alcohol, Calcium Chloride, Coolant, Grease, Hydraulic Fluid, Sodium Carbonate (Soda Ash), Water | -20 to 250 | 26 in. Hg @ 72° F | 3/4" | 3/4" | 4983N15 | 000000 | |
| 11" | 9" | 6 | 4 | 8" | 8 | 8 | 1 9/16" | 3/4" | 1/2" | 190 psi @ 72° F | Single Bulb | EPDM | Grain Alcohol, Air, Alcohol, Calcium Chloride, Coolant, Grease, Hydraulic Fluid, Sodium Carbonate (Soda Ash), Water | -20 to 250 | 26 in. Hg @ 72° F | 7/8" | 3/4" | 4983N16 | 00000000 | |
| 13 1/2" | 11" | 8 | 6 | 8" | 8 | 8 | 1 9/16" | 3/4" | 1/2" | 190 psi @ 72° F | Single Bulb | EPDM | Grain Alcohol, Air, Alcohol, Calcium Chloride, Coolant, Grease, Hydraulic Fluid, Sodium Carbonate (Soda Ash), Water | -20 to 250 | 26 in. Hg @ 72° F | 7/8" | 7/8" | 4983N17 | 00000000 | |
 |
For Pipe Size | |||||||
|---|---|---|---|---|---|---|---|
(A) | (B) | Rod Lg. | Includes | Pkg. Qty. | Pkg. | ||
| 2 | 1 | 14" | Four Limit Rod Plates, Two Limit Rods with Nuts | 2 | 4983N115 | 0000000 | |
| 2 | 1 1/2 | 14" | Four Limit Rod Plates, Two Limit Rods with Nuts | 2 | 4983N125 | 000000 | |
| 3 | 2 | 14" | Four Limit Rod Plates, Two Limit Rods with Nuts | 2 | 4983N135 | 000000 | |
| 4 | 2 | 14" | Four Limit Rod Plates, Two Limit Rods with Nuts | 2 | 4983N145 | 000000 | |
| 4 | 3 | 14" | Four Limit Rod Plates, Two Limit Rods with Nuts | 2 | 4983N155 | 000000 | |
| 6 | 4 | 14" | Four Limit Rod Plates, Two Limit Rods with Nuts | 2 | 4983N165 | 000000 | |
| 8 | 6 | 17" | Four Limit Rod Plates, Two Limit Rods with Nuts | 2 | 4983N175 | 000000 | |
