The insulation on these cords resists water, so they can be used outdoors.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Run power to welders in machine shops, garages, and other areas where these cords will be exposed to harsh conditions. These cords have either EPDM or PVC insulation that protects the cord's wires from weld slag and being dragged, kicked, and stepped on.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

A locking lever on the socket keeps multiple devices connected to these extension cords.

Put overhead outlets in arm’s reach.

A locking lever on the female socket prevents your device from disconnecting.

The shielding blocks signal interference from nearby equipment and devices.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

Transmit audio, video, and data signals over long distances with minimal signal loss.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Use this general purpose cable to supply power to equipment.

Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.

Often used in mining equipment, submersible pumps, and drilling rigs, this cable withstands 2,000 volts AC/DC.

Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.

Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.

Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.

Use this cable for complex and high-speed data and signal transmission.

Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.

Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.

Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.

Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.

Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.

In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.

For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable. It withstands continuous motion without degrading data or signal transmission.

Wire multiple components in your security system using a single cable.

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

This cable is approved for use in vertical shafts and large facilities with mulitple levels for critical circuits such as fire alarms and smoke detectors.

This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.

Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.

Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.

This cable withstands abrasion, oil, and the rough conditions found in welding applications.