3/4" Extensions | McMaster-Carr

Rated Grade 2 or lower, these are about half as strong as medium-strength steel coupling nuts. Use them with threaded rods that have a comparable strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Black-Oxide Steel—A dark, matte coating creates a finished look. Nuts offer minimal corrosion resistance, so they're best for dry environments.

Zinc-Flake-Coated Steel—The most durable zinc coating, zinc flake is a multilayer finish that resists wear for long-term rust protection. These nuts are 40 times as corrosion resistant as zinc-plated steel and have been tested to extreme standards, including 1,000 hours of salt spray. They are comparable to Magni-coated nuts.

						Each
	Thread Size	Lg.	Wd.	Threading		1-9	10-49	50-Up
Zinc-Plated Steel



		10-24	3/4"	5/16"	Fully Threaded	90264A425	00000	00000	00000


		10-32	3/4"	5/16"	Fully Threaded	90264A430	0000	0000	0000


		Black-Oxide Steel



				10-24	3/4"	5/16"	Fully Threaded	91034A411	0000	0000	0000


				Zinc-Flake-Coated Steel



						10-24	3/4"	5/16"	Fully Threaded	93350A551	0000	0000	0000

Medium-Strength Steel

These Grade 5 or Class 8 nuts are about twice as strong as low-strength steel coupling nuts. Use them with threaded rods that have a comparable strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

							Each
	Thread Size	Lg.	Wd.	Fastener Strength Grade/Class	Threading		1-9	10-49	50-Up
Zinc-Plated Steel



		10-24	3/4"	1/2"	SAE Grade 5	Fully Threaded	90977A017	00000	00000	00000


		10-32	3/4"	1/2"	SAE Grade 5	Fully Threaded	90977A021	0000	0000	0000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Highly Corrosion-Resistant 316 Stainless Steel—The most corrosion-resistant stainless steel coupling nuts we offer, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.

							Each
	Thread Size	Lg.	Wd.	Threading	Certificate Type		1-9	10-49	50-Up
18-8 Stainless Steel



		10-24	3/4"	3/8"	Fully Threaded	Material Certificate	90268A011	00000	00000	00000


		10-32	3/4"	3/8"	Fully Threaded	Material Certificate	90268A320	0000	0000	0000
		12-24	3/4"	3/8"	Fully Threaded	—	90268A214	0000	0000	0000


		Highly Corrosion-Resistant 316 Stainless Steel



				10-24	3/4"	3/8"	Fully Threaded	Material Certificate	90104A106	0000	0000	0000


				10-32	3/4"	3/8"	Fully Threaded	Material Certificate	90104A107	0000	0000	0000

Lightweight Aluminum

6061 Aluminum—One-third the weight of steel, these nuts are commonly used in robotics, automation, and other applications that have weight limitations. They're an alternative to stainless steel for rust resistance but are not as strong.

						Each
	Thread Size	Lg.	Wd.	Threading		1-9	10-49	50-Up
6061 Aluminum



		10-24	3/4"	3/8"	Fully Threaded	90012A104	00000	00000	00000


		10-32	3/4"	3/8"	Fully Threaded	90012A105	0000	0000	0000

Brass

Brass—With a warm, polished look, these nuts are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments. It is also softer than other metals, so it's easier to thread together.

							Each
	Thread Size	Lg.	Wd.	Threading	Certificate Type		1-9	10-49	50-Up
Brass



		10-24	3/4"	3/8"	Fully Threaded	Material Certificate	90465A104	000000	00000	00000


		10-32	3/4"	3/8"	Fully Threaded	—	90465A105	00000	0000	0000
		12-24	3/4"	3/8"	Fully Threaded	Material Certificate	90465A314	00000	0000	0000

Plastic

Nylon 6/6—Slippery and abrasion resistant, these nuts thread on smoothly and stand up to daily wear and tear. Nylon will swell and weaken when exposed to moisture, so it's best for dry environments.

					Temp.				Each
	Thread Size	Lg.	Wd.	Threading	Min.	Max., ° F	Color		1-9	10-49	50-Up
Nylon 6/6



		10-32	3/4"	3/8"	Fully Threaded	Not Rated	250	Off-White	1319N16	00000	00000	00000

Round Coupling Nuts

Less bulky than hex coupling nuts, these have a smooth, round body that fits in tight spots. Their finished appearance makes them a common choice for decorative applications. Tighten by hand, or use soft-jaw pliers to avoid marring the outside surface. Also known as extension nuts, they are commonly used to connect lengths of threaded rod and join threaded parts.

Steel

Black-Oxide Steel—A dark, matte coating creates a finished look. Nuts offer minimal corrosion resistance, so they're best for dry environments.

							Each
	Thread Size	Lg.	OD	Threading	Certificate Type		1-9	10-Up
Black-Oxide Steel



		8-32	3/4"	19/64"	Fully Threaded	Material Certificate	96177A110	00000	00000


		10-32	3/4"	19/64"	Fully Threaded	—	96177A120	0000	0000
		1/4"-20	3/4"	23/64"	Fully Threaded	Material Certificate	96177A130	0000	0000
		1/4"-28	3/4"	23/64"	Fully Threaded	—	96177A140	0000	0000
		5/16"-18	3/4"	27/64"	Fully Threaded	—	96177A190	0000	0000
		5/16"-24	3/4"	27/64"	Fully Threaded	—	96177A210	00000	0000
		3/8"-16	3/4"	31/64"	Fully Threaded	—	96177A310	0000	0000
		3/8"-24	3/4"	31/64"	Fully Threaded	—	96177A320	00000	0000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

							Each
	Thread Size	Lg.	OD	Threading	Certificate Type		1-9	10-Up
18-8 Stainless Steel



		8-32	3/4"	19/64"	Fully Threaded	Material Certificate	90202A201	00000	00000


		10-32	3/4"	19/64"	Fully Threaded	Material Certificate	90202A202	0000	0000
		1/4"-20	3/4"	23/64"	Fully Threaded	Material Certificate	90202A203	0000	0000
		1/4"-28	3/4"	23/64"	Fully Threaded	Material Certificate	90202A204	0000	0000
		5/16"-18	3/4"	27/64"	Fully Threaded	Material Certificate	90202A209	0000	0000
		5/16"-24	3/4"	27/64"	Fully Threaded	—	90202A211	00000	00000
		3/8"-16	3/4"	31/64"	Fully Threaded	Material Certificate	90202A221	0000	0000
		3/8"-24	3/4"	31/64"	Fully Threaded	—	90202A222	00000	00000


		Highly Corrosion-Resistant 316 Stainless Steel



				8-32	3/4"	19/64"	Fully Threaded	—	93282A110	0000	0000


				10-32	3/4"	19/64"	Fully Threaded	Material Certificate	93282A120	0000	0000
				1/4"-20	3/4"	23/64"	Fully Threaded	Material Certificate	93282A130	0000	0000
				5/16"-18	3/4"	27/64"	Fully Threaded	—	93282A190	00000	00000
				3/8"-16	3/4"	31/64"	Fully Threaded	Material Certificate	93282A310	00000	00000

Coupling Nuts with Sight Hole

Confirm that threads are fastened to the right depth at a glance. If you see threads through the sight hole, you'll know that they are properly engaged to ensure a strong hold. Also known as extension nuts, these are commonly used to connect lengths of threaded rod and join threaded parts.

Low-Strength Steel

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

								Each
	Thread Size	Lg.	Wd.	Fastener Strength Grade/Class	Threading	Sight Hole Dia.		1-9	10-Up
Zinc-Plated Steel



		10-24	3/4"	5/16"	SAE Grade 2	Fully Threaded	5/64"	93525A280	00000	00000


		10-32	3/4"	5/16"	SAE Grade 2	Fully Threaded	5/64"	93525A283	0000	0000
		1/4"-20	3/4"	3/8"	SAE Grade 2	Fully Threaded	3/32"	93525A286	0000	0000
		1/4"-28	3/4"	3/8"	SAE Grade 2	Fully Threaded	3/32"	93525A289	0000	0000

Extension Springs

The farther you stretch these springs, the harder they pull to bring the two ends back together. They're commonly used to tension cable, return an air cylinder to its starting point, or hold a door closed.

Loop End—The most secure attachment method. With fully closed loops, there's no risk of slipping off.

Hook End—Hook into closed holes, such as hanger bolt eyes. These springs work best when kept under tension, as they're more likely to slip off than loop-end springs when tension is released. Also known as machine hook ends.

Spring Steel—Strong and resilient, but best suited for dry environments since moisture will cause these springs to rust.

Corrosion-Resistant 302 Stainless Steel—Won’t corrode from exposure to moisture and mild chemicals, including ammonia often found in cleaning solutions. These springs are easier to extend than steel, but can’t handle as high a load.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant stainless steel springs won't degrade when exposed to salt water and harsh chemicals. They're easier to extend than steel, but can’t handle as high a load.

Minimum Load—The amount of force required to start extending the spring.

Maximum Load—The amount of force required to fully extend the spring.

					Load, lb.
	Lg.	OD	Wire Dia.	Extended Lg. @ Max. Load	Min.	Max.	Spring Rate, lbf/in	Pkg. Qty.		Pkg.
Loop End







				Spring Steel

				0.75"	0.063"	0.008"	1.64"	0.04	0.45	0.5	5	5108N012	000000


				0.75"	0.063"	0.009"	1.4"	0.06	0.62	0.9	5	5108N019	00000
				0.75"	0.063"	0.011"	1.14"	0.1	1.09	2.5	5	5108N026	00000
				0.75"	0.094"	0.01"	2"	0.05	0.6	0.4	5	5108N031	00000
				0.75"	0.094"	0.011"	1.68"	0.06	0.7	0.7	5	5108N038	00000
				0.75"	0.094"	0.012"	1.5"	0.1	1	1.2	5	5108N045	00000
				0.75"	0.094"	0.013"	1.35"	0.1	1.15	1.7	5	5108N052	00000
				0.75"	0.094"	0.014"	1.23"	0.17	1.5	2.7	5	5108N059	00000
				0.75"	0.094"	0.016"	1.12"	0.19	2.15	5.3	5	5108N066	00000
				0.75"	0.12"	0.014"	2.01"	0.1	1.3	0.97	1	8594N101	0000
				0.75"	0.12"	0.02"	1.08"	0.3	3	8.3	5	5108N093	00000


				0.75"	0.12"	0.022"	1"	0.35	3.89	14	5	5108N104	00000
				0.75"	0.18"	0.014"	2.4"	0.07	0.77	0.4	5	5108N116	00000
				0.75"	0.18"	0.018"	1.66"	0.14	1.55	1.5	3	9044K104	0000
				0.75"	0.18"	0.022"	1.31"	0.2	2.6	4.4	3	9044K128	0000
				0.75"	0.18"	0.024"	1.2"	0.31	3.45	6.9	5	5108N144	00000
				0.75"	0.18"	0.026"	1.12"	0.4	4.2	10.6	5	5108N157	00000
				0.75"	0.18"	0.029"	1.03"	0.52	5.82	18.9	3	9044K55	0000
				0.75"	0.18"	0.031"	0.98"	0.6	6.8	27.1	5	5108N178	00000
				0.75"	0.18"	0.034"	0.93"	0.81	8.97	44.7	5	5108N191	00000
				0.75"	0.24"	0.018"	1.96"	0.11	1.18	0.9	3	9044K178	0000


				0.75"	0.24"	0.022"	1.53"	0.19	2.07	2.4	3	9044K194	0000
				0.75"	0.24"	0.026"	1.29"	0.3	3.3	5.6	5	5108N222	00000
				0.75"	0.24"	0.029"	1.17"	0.4	4.5	9.8	3	9044K113	0000
				0.75"	0.24"	0.031"	1.11"	0.5	5.3	13.8	5	5108N252	00000
				0.75"	0.24"	0.034"	1.04"	0.65	7	22.1	5	5108N27	00000
				0.75"	0.24"	0.037"	0.98"	0.8	8.7	34.3	5	5108N287	00000
				0.75"	0.24"	0.041"	0.93"	1.05	11.65	58.5	5	5108N301	00000
				0.75"	0.3"	0.037"	1.01"	0.65	7.2	25.4	3	9044K171	0000
				0.75"	0.36"	0.045"	0.87"	0.9	10.2	76.5	3	9044K243	0000




						Corrosion-Resistant 302 Stainless Steel

						0.75"	0.063"	0.008"	1.64"	0.03	0.37	0.42	3	7749N071	00000


						0.75"	0.063"	0.009"	1.4"	0.05	0.52	0.75	3	7749N072	00000
						0.75"	0.094"	0.01"	2"	0.04	0.5	0.33	3	7749N074	00000
						0.75"	0.094"	0.012"	1.5"	0.08	0.83	1	3	7749N076	00000
						0.75"	0.094"	0.014"	1.23"	0.14	1.25	2.25	3	7749N078	00000
						0.75"	0.094"	0.016"	1.12"	0.16	1.79	4.42	3	7749N079	00000
						0.75"	0.125"	0.014"	1.22"	0.15	0.63	1.01	3	94135K142	00000
						0.75"	0.125"	0.016"	1.07"	0.26	0.94	2.09	3	94135K163	00000
						0.75"	0.125"	0.018"	0.97"	0.41	1.29	4	3	94135K174	00000
						0.75"	0.125"	0.02"	0.91"	0.58	1.73	7.2	3	94135K178	00000
						0.75"	0.125"	0.023"	0.85"	0.98	2.55	15.89	3	94135K183	00000


0.75"	0.18"					0.014"	2.4"	0.06	0.64	0.33	5	7749N08	00000
0.75"	0.18"					0.018"	1.66"	0.12	1.35	1.3	3	9065K13	0000
0.75"	0.18"					0.02"	1.35"	0.2	1.5	2.3	1	9065K572	0000
0.75"	0.18"	0.022"				1.31"	0.17	2.26	3.82	3	9065K35	0000
0.75"	0.18"	0.024"	1.18"			0.3	2.7	5.5	1	9065K576	0000
0.75"	0.18"	0.026"	1.07"			0.4	3.2	8.5	1	9065K578	0000
0.75"	0.18"	0.029"	1.03"			0.45	5.06	16.42	3	9065K55	0000
0.75"	0.18"	0.031"	0.98"			0.5	5.66	22.57	5	7749N081	00000
0.75"	0.188"	0.016"	1.58"			0.11	0.71	0.72	6	94135K95	00000
0.75"	0.188"	0.018"	1.28"			0.18	0.89	1.35	3	94135K217	00000


0.75"	0.188"	0.02"	1.14"			0.28	1.2	2.38	3	94135K226	00000
0.75"	0.188"	0.023"	1"			0.49	1.78	5.1	3	94135K239	00000
0.75"	0.188"	0.025"	0.94"			0.68	2.25	8.08	3	94135K268	00000
0.75"	0.24"	0.018"	1.96"			0.1	1.03	0.78	3	9065K178	0000
0.75"	0.24"	0.022"	1.53"			0.17	1.8	2.09	3	9065K194	0000
0.75"	0.24"	0.026"	1.29"			0.25	2.75	4.67	5	7749N083	00000
0.75"	0.24"	0.029"	1.17"			0.35	3.91	8.52	3	9065K113	0000
0.75"	0.24"	0.031"	1.11"			0.42	4.41	11.5	5	7749N084	00000
0.75"	0.24"	0.037"	0.98"			0.67	7.25	28.57	5	7749N086	00000
0.75"	0.24"	0.041"	0.93"			0.87	9.7	48.73	5	7749N087	00000


0.75"	0.3"	0.037"	1.01"			0.56	6.26	22.07	3	9065K171	0000
0.75"	0.36"	0.041"	0.89"			0.58	6.58	43.9	5	7749N089	00000
0.75"	0.36"	0.045"	0.87"			0.78	8.86	66.48	3	9065K243	0000




		Highly Corrosion-Resistant 316 Stainless Steel

		0.75"	0.063"			0.008"	1.1"	0.03	0.18	0.42	2	4992N163	00000


		0.75"	0.063"			0.011"	0.95"	0.08	0.49	2.08	2	4992N164	00000
		0.75"	0.078"			0.008"	1.301"	0.03	0.13	0.23	1	4992N885	0000
		0.75"	0.078"			0.009"	1.174"	0.04	0.19	0.43	1	4992N893	0000
		0.75"	0.18"			0.014"	1.52"	0.06	0.31	0.33	2	4992N174	00000
		0.75"	0.18"			0.018"	1.2"	0.12	0.68	1.25	2	4992N175	00000
		0.75"	0.18"			0.02"	1.1"	0.16	0.94	2.25	2	4992N176	00000
		0.75"	0.18"			0.022"	1.05"	0.17	1.26	3.67	2	4992N177	00000
		0.75"	0.18"			0.026"	0.95"	0.33	2.12	8.83	2	4992N179	00000
		0.75"	0.18"			0.029"	0.91"	0.43	2.98	15.74	2	4992N18	00000
		0.75"	0.188"			0.016"	1.33"	0.07	0.42	0.73	1	4992N974	0000


		0.75"	0.24"	0.018"	1.29"	0.09	0.49	0.75	2	4992N183	00000
		0.75"	0.24"	0.026"	1.02"	0.25	1.53	4.67	2	4992N185	00000
		0.75"	0.24"	0.031"	0.94"	0.42	2.62	11.5	2	4992N187	00000


		Hook End







						Spring Steel

						0.75"	0.063"	0.009"	1.4"	0.06	0.62	0.9	5	7383N13	00000


						0.75"	0.063"	0.011"	1.14"	0.1	1.09	2.5	5	7383N137	00000
						0.75"	0.094"	0.01"	2"	0.05	0.6	0.4	5	7383N142	00000
						0.75"	0.094"	0.013"	1.35"	0.1	1.15	1.7	5	7383N162	00000
						0.75"	0.12"	0.014"	1.58"	0.1	1.12	1.2	5	7383N18	00000
						0.75"	0.12"	0.016"	1.34"	0.2	1.6	2.5	5	7383N19	00000
						0.75"	0.12"	0.02"	1.08"	0.3	3	8.3	5	7383N213	00000
						0.75"	0.12"	0.022"	1"	0.35	3.89	14	5	7383N223	00000
						0.75"	0.18"	0.014"	2.4"	0.07	0.77	0.4	5	7383N235	00000
						0.75"	0.18"	0.018"	1.66"	0.14	1.55	1.5	5	7383N24	00000
						0.75"	0.18"	0.02"	1.46"	0.19	2.08	2.7	5	7383N252	00000


						0.75"	0.18"	0.024"	1.2"	0.31	3.45	6.9	5	7383N275	00000
						0.75"	0.18"	0.026"	1.12"	0.4	4.2	10.6	5	7383N288	00000
						0.75"	0.18"	0.034"	0.93"	0.81	8.97	44.7	5	7383N326	00000
						0.75"	0.24"	0.018"	1.96"	0.11	1.18	0.9	5	7383N339	00000
						0.75"	0.24"	0.022"	1.53"	0.19	2.07	2.4	5	7383N348	00000
						0.75"	0.24"	0.026"	1.29"	0.3	3.3	5.6	5	7383N362	00000
						0.75"	0.24"	0.029"	1.17"	0.4	4.5	9.8	5	7383N377	00000
						0.75"	0.24"	0.031"	1.11"	0.5	5.3	13.8	5	7383N395	00000
						0.75"	0.24"	0.034"	1.04"	0.65	7	22.1	5	7383N411	00000
						0.75"	0.24"	0.037"	0.98"	0.8	8.7	34.3	5	7383N429	00000


						0.75"	0.24"	0.041"	0.93"	1.05	11.65	58.5	5	7383N444	00000
						0.75"	0.3"	0.037"	1.01"	0.65	7.2	25.4	5	7383N471	00000




						Corrosion-Resistant 302 Stainless Steel

						0.75"	0.063"	0.011"	1.14"	0.08	0.91	2.08	3	9433K026	00000


						0.75"	0.094"	0.01"	1.56"	0.05	0.36	0.38	1	9433K258	0000
						0.75"	0.094"	0.012"	1.5"	0.08	0.83	1	3	9433K04	00000
						0.75"	0.094"	0.013"	1.35"	0.08	0.96	1.42	3	9433K046	00000
						0.75"	0.12"	0.014"	1.58"	0.08	0.93	1	5	9433K061	00000
						0.75"	0.12"	0.016"	1.34"	0.17	1.33	2.08	5	9433K071	00000
						0.75"	0.18"	0.014"	2.4"	0.06	0.64	0.33	5	9433K117	00000
						0.75"	0.18"	0.018"	1.66"	0.12	1.29	1.25	5	9433K122	00000
						0.75"	0.18"	0.02"	1.46"	0.16	1.73	2.25	5	9433K133	00000
						0.75"	0.18"	0.022"	1.31"	0.17	2.17	3.67	5	9433K146	00000
						0.75"	0.18"	0.026"	1.12"	0.33	3.5	8.83	5	9433K168	00000


						0.75"	0.18"	0.031"	0.98"	0.5	5.66	22.57	5	9433K187	00000
						0.75"	0.188"	0.015"	2.35"	0.06	0.64	0.36	1	9433K431	0000
						0.75"	0.188"	0.016"	1.95"	0.08	0.78	0.61	1	9433K529	0000
						0.75"	0.188"	0.018"	1.85"	0.1	1.1	0.9	1	9433K428	0000
						0.75"	0.188"	0.028"	0.96"	0.9	4.2	16	1	9433K427	0000
		0.75"				0.24"	0.018"	1.96"	0.09	0.98	0.75	5	8897N198	0000
		0.75"	0.24"			0.022"	1.53"	0.16	1.72	2	5	9433K364	00000
		0.75"	0.24"			0.026"	1.29"	0.25	2.75	4.67	5	9433K378	00000
		0.75"	0.24"			0.041"	0.93"	0.87	9.7	48.73	5	9433K642	00000
		0.75"	0.25"			0.026"	1.29"	0.42	2	3.86	1	9433K429	0000


		0.75"	0.3"	0.037"	1.01"	0.54	6	21.16	5	9433K665	00000
		0.75"	0.375"	0.041"	0.88"	0.9	5.3	33.02	3	9433K202	00000




				Highly Corrosion-Resistant 316 Stainless Steel

				0.75"	0.109"	0.014"	1.572"	0.13	1.46	1.62	5	1942N42	00000


				0.75"	0.125"	0.022"	1.03"	0.37	1.37	10.33	2	1942N143	00000
				0.75"	0.188"	0.022"	1.33"	0.25	0.88	3.17	2	1942N144	00000
				0.75"	0.188"	0.024"	1.25"	0.33	1.19	5	2	1942N145	00000
				0.75"	0.188"	0.026"	1.15"	0.42	1.51	7.91	2	1942N146	00000
				0.75"	0.188"	0.034"	0.95"	0.75	3.15	33.32	2	1942N149	00000
				0.75"	0.25"	0.022"	1.7"	0.17	0.74	1.67	2	1942N151	00000
				0.75"	0.25"	0.026"	1.31"	0.33	1.09	4	2	1942N152	00000
				0.75"	0.25"	0.031"	1.13"	0.58	1.82	10	2	1942N154	00000
				0.75"	0.25"	0.034"	1.08"	0.71	2.38	14.83	2	1942N155	00000
				0.75"	0.25"	0.037"	1.01"	1.89	5	24.24	2	1942N156	00000


				0.75"	0.25"	0.041"	0.96"	0.87	4.1	42.98	2	1942N157	00000

T-Handle Key, L-Key, and Screwdriver Extenders


Adapter	Adapter and Shaft Shown in Use

Create a tool that’s as long as you need. Attach a driver shaft to a screwdriver, T-handle key, or L-key to extend your reach, or chain multiple shafts together to reach deeply recessed fasteners. Select a driver shaft with the same drive size and drive style as your tool.

Driver Extension Adapters					Ball-End Driver Shafts
Hex Drive Size	Overall Lg.	Material		Each		Each
9/64"	3/4"	Black Phosphate-Coated Alloy Steel	9761N17	000000	6972A19	00000
5/32"	3/4"	Black Phosphate-Coated Alloy Steel	9761N18	00000	6972A21	0000
3/16"	3/4"	Black Phosphate-Coated Alloy Steel	9761N19	00000	6972A22	0000
7/32"	3/4"	Black Phosphate-Coated Alloy Steel	9761N21	00000	6972A23	0000
1/4"	3/4"	Black Phosphate-Coated Alloy Steel	9761N22	00000	6972A24	0000
4 mm	3/4"	Black Phosphate-Coated Alloy Steel	9761N29	00000	6972A49	0000
5 mm	3/4"	Black Phosphate-Coated Alloy Steel	9761N31	00000	6972A52	0000
6 mm	3/4"	Black Phosphate-Coated Alloy Steel	9761N32	00000	6972A54	0000