About External and Internal Grip Pullers
More
External Grip Pullers
Grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
Pullers with jaw tips on both ends have a different jaw tip size on each end for versatility in fitting bearings, gears, and wheels.
Pullers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Adjustment Holes | Forcing Screw | Replacement Jaws | ||||||||||||
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size  | Each | Each | ||
| 1/2"-3 1/4" | 2 1/8" | 1 | Steel | Steel | Steel | 1/4" | 3/16" | 2 | 1/4" | 3 7/8" | 5/16"-24 | 0000000 | 000000 | 000000 | 00 |
| 1/2"-9 1/2" | 8 3/4" | 7 | Steel | __ | Steel | 1" | 3/8" | 3 | 7/16" | 9" | 11/16"-18 | 0000000 | 000000 | 000000 | 000000 |
| 1/2"-12" | 11" | 13 | Steel | __ | Steel | 1" | 9/16" | 2 | 1/2" | 12 1/2" | 13/16"-16 | 0000000 | 000000 | 000000 | 00 |
| 1/2"-15 1/2" | 15 1/4" | 13 | Steel | __ | Steel | 1" | 9/16" | 3 | 1/2" | 12 1/2" | 13/16"-16 | 0000000 | 000000 | 000000 | 00 |
| 1/2"-16" | 18 3/4" | 17 1/2 | Steel | __ | Steel | 1 5/16" | 13/16" | 3 | 5/8" | 13 3/4" | 1"-14 | 0000000 | 000000 | 000000 | 00 |
| 1/2"-20" | 22 1/4" | 25 | Steel | __ | Steel | 1 1/2" | 1 1/16" | 3 | 11/16" | 16" | 1 1/4"-12 | 0000000 | 000000 | 000000 | 00 |
Pullers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Adjustment Holes | Forcing Screw | Replacement Jaws | |||||||||||
| For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Jaw Tip Wd. × Jaw Tip Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | Each | ||
| 1/2"-4" | 3 1/4" | 2 | Steel | Steel | 1/4" × 3/16", 1/2" × 1/8" | 2 | 5/16" | 4 7/8" | 3/8"-24 | 0000000 | 000000 | 000000 | 000000 |
| 1/2"-6" | 3 1/4" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 1 | 3/8" | 7" | 9/16"-20 | 0000000 | 000000 | 000000 | 00000 |
| 1/2"-6" | 5 1/2" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 2 | 3/8" | 7" | 9/16"-20 | 0000000 | 000000 | 000000 | 00000 |
| 1/2"-9" | 5" | 7 | Steel | Steel | 1" × 5/16", 1" × 3/8" | 1 | 7/16" | 9" | 11/16"-18 | 0000000 | 000000 | 000000 | 00000 |
Jaw Tip | Adjustment Holes | Forcing Screw | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | |
| 1/2"-3 1/4" | 2 1/8" | 1 | Steel | Steel | Steel | 1/4" | 3/16" | 2 | 1/4" | 3 7/8" | 5/16"-24 | 0000000 | 000000 |
| 1/2"-14" | 14 1/2" | 17 1/2 | Steel | __ | Steel | 1 5/16" | 13/16" | 2 | 5/8" | 13 3/4" | 1"-14 | 0000000 | 000000 |
| 1/2"-16" | 18 3/4" | 17 1/2 | Steel | __ | Steel | 1 5/16" | 13/16" | 3 | 5/8" | 13 3/4" | 1"-14 | 0000000 | 000000 |
Pullers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Adjustment Holes | Forcing Screw | Replacement Jaws | |||||||||||
| For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | Each | ||
| 1/2"-11" | 8 3/4" | 7 | Steel | Steel | 1" | 3/8" | 3 | 7/16" | 9" | 11/16"-18 | 0000000 | 0000000 | 000000 | 000000 |
| 1/2"-12" | 11" | 13 | Steel | Steel | 1" | 9/16" | 2 | 1/2" | 12 1/2" | 13/16"-16 | 0000000 | 000000 | 000000 | 00 |
| 1/2"-17" | 15 1/4" | 13 | Steel | Steel | 1" | 9/16" | 3 | 1/2" | 12 1/2" | 13/16"-16 | 0000000 | 000000 | 000000 | 00 |
Pullers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Adjustment Holes | Forcing Screw | Replacement Jaws | |||||||||||
| For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Jaw Tip Wd. × Jaw Tip Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | Each | ||
| 1/2"-4 3/4" | 3 1/4" | 2 | Steel | Steel | 1/4" × 3/16", 1/2" × 1/8" | 2 | 5/16" | 4 7/8" | 3/8"-24 | 0000000 | 000000 | 000000 | 000000 |
| 1/2"-7" | 3 1/4" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 1 | 3/8" | 7" | 9/16"-20 | 0000000 | 000000 | 000000 | 00000 |
| 1/2"-7" | 5 1/2" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 2 | 3/8" | 7" | 9/16"-20 | 0000000 | 000000 | 000000 | 00000 |
| 1/2"-10 1/2" | 5" | 7 | Steel | Steel | 1" × 5/16", 1" × 3/8" | 1 | 7/16" | 9" | 11/16"-18 | 0000000 | 000000 | 000000 | 00000 |
Quick-Hold External Grip Pullers
These pullers have a cage around the jaws that keeps them aligned so you can secure bearings and pulleys quickly. Use them to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
Pullers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Jaws | Replacement Jaw Heads | Replacement Pins | |||||||||||||
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | Each | Each | ||||
| 1/4"-3 1/4" | 2 1/4" | 1 | Steel | Iron | Steel | 11/32" | 1/8" | 5 1/2" | 5/16"-24 | 000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
| 1/2"-5" | 4" | 2 | Steel | Iron | Steel | 5/8" | 3/16" | 9 5/8" | 9/16"-16 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1/2"-7" | 6" | 6 | Steel | Iron | Steel | 3/4" | 1/4" | 12 3/4" | 5/8"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 3/4"-12" | 8" | 12 | Steel | Iron | Steel | 7/8" | 9/32" | 16 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 1"-15" | 9 5/8" | 14 | Steel | Iron | Steel | 1" | 11/32" | 19 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 2 1/2"-18" | 12" | 25 | Steel | Iron | Steel | 1 1/4" | 1/2" | 26" | 1 1/8"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
| 3"-25" | 14" | 35 | Steel | Iron | Steel | 1 7/16" | 11/16" | 31 1/2" | 1 1/4"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
Pullers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Jaws | Replacement Jaw Heads | Replacement Pins | |||||||||||||
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | Each | Each | ||||
| 1/4"-4 1/2" | 3" | 2 | Steel | Iron | Steel | 7/16" | 3/16" | 7" | 3/8"-24 | 000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
| 1/2"-5" | 4" | 5 | Steel | Iron | Steel | 5/8" | 3/16" | 9 5/8" | 9/16"-16 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1/2"-7" | 6" | 10 | Steel | Iron | Steel | 3/4" | 1/4" | 12 3/4" | 5/8"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 3/4"-12" | 8" | 17 | Steel | Iron | Steel | 7/8" | 9/32" | 16 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 1"-15" | 9 5/8" | 20 | Steel | Iron | Steel | 1" | 11/32" | 19 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 00000 |
| 2 1/2"-18" | 12" | 30 | Steel | Iron | Steel | 1 1/4" | 1/2" | 26" | 1 1/8"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
| 3"-25" | 14" | 40 | Steel | Iron | Steel | 1 7/16" | 11/16" | 31 1/2" | 1 1/4"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
High-Force External Grip Puller Sets
Move the immovable—this puller set includes a hand pump and hydraulic cylinder so you can create up to 17 1/2 tons of pulling force.
| Capacity, tons | Puller Material | Includes | Each | |
| 17 1/2 | Steel | 3-Jaw External-Grip Hydraulic Puller (For Up To 20" OD; 11 1/2" Reach) 3-to-2 Jaw Head Converter for 3-Jaw External-Grip Hydraulic Puller Adjusting Screw Bearing Separator (1/2"-9" Spread) Crank Handle Face-Grip Hydraulic Puller with End Caps (For 5 3/4"-11 3/4" OD; 18 1/2" Reach) Hose Half Coupler with Dust Cap Hydraulic Cylinder (2" Stroke) Hydraulic Hose - 6 Feet Internal-Grip Jaw Attachment (For 1 1/2"-9" OD; 4" Reach) for 3-Jaw External-Grip Hydraulic Puller Pair of Legs (22 1/2" Reach) for Face-Grip Puller Pressure Gauge Single Stage Hydraulic Hand Pump Assembly Tee Adapter Three Threaded Adapters Two Pushing Adapters Wood Case | 0000000 | 000000000 |
Economy External Grip Pullers
This low-capacity puller is often used to remove corroded battery terminals.
Jaw | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For OD | Reach | Capacity, lbs. | O'all Lg. | Tip Wd. | Tip Thick. | Puller Material | Includes | Each | |
| 3/4"-1 1/2" | 1 3/4" | 12 | 4" | 3/16" | 3/16" | Steel | Forcing Screw with T-Handle | 000000 | 00000 |
Hub and Fan Blade External Grip Pullers
A must-have for HVAC jobs, this puller makes quick work of removing press-fit hubs and fan blades from motor shafts.
For hub-mounted components such as blower wheels, secure the puller with the included set screws. For fan blades, attach the puller with the removable jaws, hooking a jaw around each fan blade to secure.
Optional hub adapter and optional long jaws (each sold separately) are for gripping larger components.
For technical drawings and 3-D models, click on a part number.
Jaw Tip | Forcing Screw | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For OD | For Shaft OD | For Hub OD | Reach | Puller Material | Jaw Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | |
| 3"-6" | 0.625" | 1 3/4" | 1 1/2" | Aluminum | Steel | Steel | 1/4" | 1/4" | 9" | 1/2"-20 | 00000000 | 000000 |
Reversible Jaw External/Internal Grip Puller Sets with Locking Storage Box
Complete with a locking storage box, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
| Puller Material | Includes | Each | |
| Steel | 2-Jaw Internal Grip Puller (For 1/2"-1 1/2" ID; 3/4" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—5-ton Capacity (For Up To 7" OD; 3 1/4" Reach) 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 10 1/2" OD; 5" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8” Long Forcing Screw Bearing Separator (1/2"-4 1/4" Spread) Bearing Separator (1/8"-1 7/8" Spread) Face-Grip Puller (For 1 1/2"-4 1/2" OD) with 13” Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Two Sets of Long-Reach Jaws (Three Jaws for 5-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller) Steel Locking Storage Box (25 3/4" Height; 29 1/2" Width; 10" Depth) | 00000000 | 000000000 |
Reversible Jaw External/Internal Grip Pullers
Grip objects on the outside or inside to tackle both types of pulling jobs. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Puller has combination 2/3 jaws—it comes with a jaw bar so you can change between 2-jaw and 3-jaw configurations to suit your application. Use the slide hammer to extract hard-to-remove objects.
Optional crossbar allows you to pull objects that have tapped holes. Thread the center hole onto the slide hammer; requires two 3/8" dia. cap screws (not included).
Replacement jaw bar converts the 3-jaw puller to a 2-jaw puller.
| For ID | For OD | Reach | Puller Material | T-Handle Material | Each | |
| 1 1/4"-4 1/4" | 1"-4 1/2" | 1 1/4", 3" | Steel | Steel | 000000 | 0000000 |
| Optional Internal Jaws (For 3/4"-2 1/2" ID; 2 3/8" Reach) | 0000000 | Each | 000000 |
| Optional External/Internal Jaws (For 1 1/4"-3 1/2" ID; For 1"-4 1/2" OD; 3 3/4" Reach) | 0000000 | Each | 00000 |
| Optional External/Internal Jaws (For 1 1/2"-4 1/2" ID; For 3/4"-5" OD; 4 1/8" Reach) | 0000000 | Each | 00000 |
| Optional External/Internal Jaws (For 2 3/4"-5 1/2" ID; For 3/4"-7 1/2" OD; 6 1/2" Reach) | 0000000 | Each | 00000 |
| Optional 5-lb. Slide Hammer (5/8"-18 Thread Size) | 000000 | Each | 00000 |
| Replacement Jaw Bar (5/8"-18 Thread Size) | 000000 | Each | 00000 |
| Optional Puller Hook (For 5/8" Minimum ID) | 000000 | Each | 00000 |
| Optional Crossbar (For 1 7/8"-5 5/8" ID; For 1 7/8"-5 5/8" OD; For 0.375" Dia. Cap Screw; Fasteners Included: No) | 000000 | Each | 00000 |
| Replacement 2 1/2-lb. Slide Hammer (5/8"-18 Thread Size) | 000000 | Each | 00000 |
| Replacement Adjusting Cone | 00000000 | Each | 00000 |
Reversible Jaw External/Internal Grip Puller Sets
Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
| Puller Material | Includes | Each | |
| Steel | Crossbar Oil-Seal Puller Hook 2-Jaw Jaw Bar 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer Three Sets of Jaws (2 3/8", 4 1/8", and 6 1/2" Reaches) | 0000000 | 0000000 |
| Steel | 2-Jaw Bridge-Style Internal Grip Puller (For 7/8"-2" ID; 1" Reach) 2-Jaw External Grip Puller—5-ton Capacity (For Up To 6" OD; 5 1/2" Reach) 2-Jaw External Grip Puller—7-ton Capacity (For Up To 9" OD; 5" Reach) 2-Jaw Internal Grip Puller (For 7/8"-2 1/8" ID; 1" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 11" OD; 8 3/4" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8” Long Forcing Screw Bearing Separator (1/2"-4 1/4" Spread) Bearing Separator (1/8"-1 7/8" Spread) Face-Grip Puller (For 1 1/2"-4 1/4" OD) with 5 1/2” Long Forcing Screw Face-Grip Puller (For 2"-7 3/4" OD) with 11 5/8” Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller | 0000000 | 00000000 |
| Replacement Adjusting Cone for 6317K34 | 00000000 | Each | 000000 |
Quick-Hold Reversible Jaw External/Internal Grip Pullers
Self-locking jaws hold these pullers in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.
To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out. Puller base lifts up so you can add or remove jaws to create 2-jaw or 3-jaw configurations.
For technical drawings and 3-D models, click on a part number.
Pullers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Forcing Screws | |||||||||||
| For ID | For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | ||
Combination 2/3 Jaws with Tips on One End | |||||||||||||
| 3"-4" | 3"-4" | 4" | 2 | Steel | Steel | 9/16" | 3/16" | 8 3/4" | M15 × 2 mm | 0000000 | 0000000 | 0000000 | 000000 |
| 3"-7" | 3"-7" | 7" | 5 | Steel | Steel | 7/8" | 1/4" | 11 3/4" | M18 × 2.5 mm | 0000000 | 000000 | 0000000 | 00000 |