Eye Clamps | McMaster-Carr

Filter by

Weight Capacity

Less than 1,000 lb.

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 9,999 lb.

10,000 lb. or greater

Not Rated

Material Position

Horizontal

Vertical

Vertical with 90° Tilt

Vertical with 180° Flip

Thickness

Mount Type

Weight Capacity per Pair

Beam Width

Beam Mount Location

For Beam Shape

Gripping Method

Material

Closing Type

Opening Type

Manual with Lock and Remote Release

For Beam Thickness

Weight

Eye Diameter

Cable OD

Application

Length

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

RoHS

REACH

Height

Overall Width

136 Products

Vertical-Lift with 180° Flip Plate Clamps


A	B	C	D

E	F	G	H

J

Take the strain out of manually standing up stacked plates before lifting them—these clamps have a full 180° range of motion. They can raise the plate from stacked to standing, then lift it vertically, so you can move the plate where you need it. When you're ready to put the plate down again, they can place it on its opposite side.

To make sure the grip is secure for safe lifting, only use these clamps within their weight capacity range.

Warning: Never use to lift people or items over people.

Automatic Close and Manual Open—Automatic close and manual open are quick and easy to use because they don’t have a locking mechanism, but they are less secure than clamps with a lock. These clamps close under their own weight—as the load increases, so does the grip. To open, first set your plate down. Then, press down on the shackle until the cam retracts and remove the plate.

Automatic Close with Lock and Automatic Open with Lock—Automatic close with lock and automatic open with lock are more secure than clamps without a lock. They close under their own weight—as the load increases, so does the grip. These clamps must be unlocked before they will automatically open and release the plate.

Manual Close and Manual Open—Manual close and manual open use a screw to grip the plate, so you can fit a range of plate thicknesses. As the load gets heavier, the bite of the cam increases, which gives the clamp a secure grip on the plate. To open, first set your plate down. Then, press down on the shackle until the cam retracts and remove the plate.

Style A—Style A have wear indicator grooves that let you know when the cam should be replaced—if any teeth are flattened, chipped, or dulled between the grooves, it’s time to swap it out.

Style B—Style B can lift I-beams.

Style C—Style C come with a two-leg sling to lift large or flexible plates.

45° Pivot and 90° Pivot—Pivoting clamps safely lift vertical loads at an angle. Also known as sideloading clamps, they are more flexible than rigid clamps. Use them individually or in pairs with a two-leg sling (not included) to lift longer plates.

Rigid—Rigid clamps lift vertical plates straight up and down but lose their grip when angled. Make sure your plate is fully vertical, and the bottom edge is resting on the ground, before lifting.

	Clamps																Replacement Grippers			Replacement Lifting Eyes
			For Thk.				Overall		Eye
	Style	Wt. Cap., lb.	Min.	Max.	Gripping Method	Opening Ht.	Wd.	Ht.	Dia.	Lg.	Wd.	Movement	For Max. Hardness	Specs. Met		Each		Each	Pair		Each
Automatic Close and Manual Open



		A	100 to 1,000	1/16"	5/8"	Teeth	2 3/16"	4"	9 1/2"	—	2 3/4"	2"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T32	0000000	8857T26	0000000	0	8857T19	0000000


		A	200 to 2,000	1/16"	3/4"	Teeth	3 1/16"	4 3/4"	11 1/4"	—	3 1/16"	2 1/16"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T33	000000	8857T27	000000	0	8857T23	000000
		A	200 to 2,000	3/4"	1 3/8"	Teeth	3 5/8"	5 7/8"	11 1/4"	—	3 1/16"	2 1/16"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T114	00000000	8857T27	000000	0	8857T23	000000
		A	600 to 6,000	1/16"	1"	Teeth	3 9/16"	6"	14"	—	3 13/16"	3"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T35	00000000	8857T28	000000	0	8857T25	000000
		B	100 to 1,000	1/16"	5/8"	Teeth	2 1/8"	4"	9 1/2"	—	2 5/8"	2"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T18	000000	8857T26	000000	0	8857T19	000000
		B	200 to 2,000	1/16"	3/4"	Teeth	2 5/8"	4 3/4"	11 5/16"	—	3 1/16"	2 1/16"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T58	000000	8857T27	000000	0	8857T23	000000
		B	400 to 4,000	1/16"	7/8"	Teeth	3 9/16"	5 1/8"	12 1/8"	—	3 5/16"	2 1/4"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T111	00000000	8857T112	000000	0	8857T113	000000
		B	600 to 6,000	1/16"	1"	Teeth	3 7/16"	6"	15 1/16"	—	3 13/16"	3"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T59	00000000	8857T28	000000	0	8857T25	000000
		C	100 to 1,000	1/16"	5/8"	Teeth	2 7/8"	4"	7 1/2"	—	6"	3"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T21	00000000	8857T26	000000	0	———	0
		C	200 to 2,000	1/16"	3/4"	Teeth	3 5/8"	4 3/4"	9 1/4"	—	6"	3"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T22	00000000	8857T27	000000	0	8857T67	000000


		Automatic Close with Lock and Automatic Open with Lock



				D	100 to 1,000	—	1 3/8"	Teeth	2 3/4"	5 7/8"	11 1/2"	2 1/4"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8845T57	000000	8845T308	000000	0	8845T301	000000


				D	200 to 2,000	—	1 3/8"	Teeth	2 3/4"	5 7/8"	11 1/2"	2 1/4"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8845T56	000000	8845T308	000000	0	8845T301	000000
				D	400 to 4,000	—	1 5/8"	Teeth	4 1/8"	8 3/8"	15 1/4"	3"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8845T55	00000000	8845T334	0	0000000	8845T315	000000
				D	800 to 8,000	—	2 1/8"	Teeth	4 5/8"	10"	19"	3 1/2"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8845T58	00000000	8845T335	0	000000	8845T316	000000
				D	1,200 to 12,000	—	2 1/8"	Teeth	4 5/8"	10"	19"	3 1/2"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8857T122	00000000	8845T335	0	000000	8845T316	000000
				D	2,000 to 20,000	—	2 5/8"	Teeth	5 3/8"	11 1/8"	22 1/4"	4"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8857T123	00000000	8857T127	0	000000	8857T129	000000
				D	2,400 to 24,000	1/2"	3 1/8"	Teeth	6 1/4"	12 1/2"	25 3/8"	4"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8857T124	00000000	8857T128	0	000000	8857T131	000000
				E	100 to 1,000	—	1 3/8"	Teeth	2 3/4"	5 7/8"	13"	2 1/4"	—	—	90° Pivot	Brinell 450, Rockwell C47	ASME B30.20	8857T125	000000	8845T308	000000	0	8845T301	000000
				E	600 to 6,000	—	1 5/8"	Teeth	4 1/8"	8 3/8"	17 3/8"	1 5/8"	—	—	90° Pivot	Brinell 450, Rockwell C47	ASME B30.20	8857T126	00000000	8845T334	0	000000	8845T315	000000
				F	200 to 2,000	—	3/4"	Teeth	1 3/4"	5"	8 1/2"	1 9/16"	—	—	Rigid	Brinell 345, Rockwell C37	ASME B30.20	8845T72	000000	8845T506	000000	0	8845T521	000000
				F	400 to 4,000	—	1 3/8"	Teeth	3 1/16"	7 1/2"	13"	2 3/4"	—	—	Rigid	Brinell 345, Rockwell C37	ASME B30.20	8845T73	00000000	8845T515	000000	0	8845T522	000000


				G	200 to 2,000	—	3/4"	Teeth	1 3/4"	5"	8 3/4"	1 9/16"	—	—	45° Pivot	Brinell 345, Rockwell C37	ASME B30.20	8845T74	00000000	8845T506	000000	0	8845T521	000000
				G	400 to 4,000	—	3/4"	Teeth	3 1/16"	7 1/2"	14 1/2"	2 3/4"	—	—	45° Pivot	Brinell 345, Rockwell C37	ASME B30.20	8857T132	00000000	———	0	0	———	0
				H	2,700 to 13,200	—	2"	Teeth	5 5/8"	11 1/2"	29"	—	6 15/16"	3 3/4"	90° Pivot	Brinell 300, Rockwell C32	ASME B30.20	8857T133	00000000	———	0	0	———	0


				Manual Close and Manual Open



						J	200 to 2,000	1/16"	1"	Screw	2 1/4"	5 3/8"	7 7/8"	—	2 7/8"	1 3/4"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	3700T11	000000	3700T36	000000	0	———	0


						J	600 to 6,000	1/16"	2"	Screw	3 3/4"	7 7/8"	10 5/8"	—	3 3/8"	1 7/8"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	3700T12	00000000	3700T37	000000	0	———	0
						J	1,200 to 12,000	1/16"	3"	Screw	4 1/2"	10"	14 3/8"	—	4 1/2"	3 3/8"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	3700T14	00000000	3700T38	000000	0	———	0

Plate Clamp Repair Kits

		Each
Repair Kit for Style D 1,000 to 2,000-lb. Capacity Clamps (Includes Bolt, Gripper, Nut, Pins, Spring)	8845T611	0000000
Repair Kit for Style D 4,000-lb. Capacity Clamps (Includes Bolt, Gripper, Nut, Pins, Spring)	8845T612	000000
Repair Kit for Style D 8,000-lb. Capacity Clamps (Includes Bolt, Gripper, Nut, Pins, Spring)	8845T613	000000

Beam Clamps for Hooks and Hangers


Style A	Style C

Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.

Style A—Style A clamps fit in low-headroom areas. Two bolts with spacers grip each side of the beam. Note: Capacity applies only to vertical loads.

Style C—Style C clamps have a T-handle for quick and easy attachment and removal. Note: Capacity applies only to vertical loads.

				For Beam Thk.		Eye
	Style	For Beam Shape	For Beam Wd.	Min.	Max.	Dia.	Thk.	Wt. Cap., lb.	Mount Type	Lg.	Wd.	Ht.		Each
Bottom-Center Beam Mount







				Steel

				A	Flat, Taper	4" to 8"	1/8"	15/16"	1 3/16"	1/2"	5,000	Clamp On	12"	6 1/2"	2 1/2"	8821T11	0000000


				A	Flat, Taper	8" to 12"	1/8"	1 1/8"	1 3/16"	1/2"	5,000	Clamp On	16"	6 1/4"	2 1/2"	8821T12	000000
				A	Flat, Taper	12" to 16"	1/8"	1 13/16"	1 3/16"	1/2"	5,000	Clamp On	20"	6"	2 1/2"	8821T13	000000
				A	Flat, Taper	16" to 20"	1/8"	1 13/16"	1 3/16"	1/2"	5,000	Clamp On	24"	7"	2 1/2"	8821T14	000000
				C	Flat, Taper	3" to 7 1/2"	—	7/8"	3 3/4"	25/32"	4,475	Clamp On	11 1/4"	6 3/8"	9 7/8"	8941T25	000000
				C	Flat, Taper	3" to 7 1/2"	—	7/8"	3 3/4"	25/32"	6,700	Clamp On	11 1/4"	6 1/2"	9 7/8"	8941T26	000000
				C	Flat, Taper	3" to 7 1/2"	—	7/8"	4 1/8"	1"	11,200	Clamp On	12 1/4"	7 3/4"	11 7/8"	8941T18	000000
				C	Flat, Taper	3 1/2" to 12"	—	1"	3 3/4"	25/32"	6,700	Clamp On	16 1/4"	8 3/8"	14 1/4"	8941T27	000000
				C	Flat, Taper	3 1/2" to 12"	—	1"	4 1/2"	1"	11,200	Clamp On	16 1/4"	8 3/8"	14 7/8"	8941T16	000000
				C	Flat, Taper	6" to 10"	—	7/8"	3 7/8"	1"	8,950	Clamp On	16 1/4"	7 3/4"	13"	8941T13	000000
				C	Flat, Taper	6" to 12"	—	1 5/8"	4 1/8"	1"	11,200	Clamp On	18 1/4"	8 3/8"	14 1/4"	8941T42	000000


				C	Flat, Taper	8" to 18"	—	1 5/8"	4 1/8"	1"	13,425	Clamp On	22 1/4"	8 3/8"	18"	8941T14	000000

Wire and Cable Pulling Clamps


Serrated Jaws Without Latch	Serrated Jaws With Latch	Smooth Jaws

Spring-Loaded Jaws	Double-V Jaws

Pull wire and cable while maintaining tension until the line can be permanently anchored. Use these clamps with stranded bare steel wire and cable.

Warning: Do not use as an anchor.

Serrated Jaws—Use clamps with serrated jaws in applications where marring can be tolerated.

Smooth Jaws—Use clamps with smooth jaws when marring needs to be kept to a minimum. They are often used on wire and cable conductors.

Spring-Loaded Jaws—Clamps with spring-loaded jaws grip the cable before tensioning to aid proper positioning.

With Latch—Clamps with a latch provide a more secure grip that prevents wire and cable from slipping out of the jaws.

	Cable Guide Lg.	Wt. Cap., lb.	With Latch	Material		Each
Serrated Jaws



	0.06" to 0.25"	1 9/16"	2,500	No	Steel	7285K4	000000


	0.13" to 0.5"	2 1/8"	5,000	No	Steel	7285K5	000000
	0.13" to 0.5"	2 1/8"	5,000	Yes	Steel	7285K21	000000


	Smooth Jaws



			0.31" to 0.53"	5"	4,500	No	Steel	7285K11	000000


			Spring-Loaded Jaws



					0.08" to 0.2"	3"	1,500	No	Steel	7285K1	000000


					0.18" to 0.6"	4 1/8"	5,000	No	Steel	7285K27	000000
					0.22" to 0.55"	5"	8,000	No	Steel	7285K9	000000


					Double-V Jaws



							0.12" to 0.37"	4 3/8"	4,500	No	Steel	7285K14	000000


							0.31" to 0.62"	7 3/8"	15,000	No	Steel	7285K7	000000

Horizontal-Lift Plate Clamps


	Automatic Close	Manual Close with Lock


Teeth Grip	Smooth Grip

Use in pairs with a two-leg sling (not included) to transfer metal plates in a horizontal position. Unlike other plate-lifting clamps, these can pick up multiple plates at the same time.

Warning: Never use to lift people or items over people.

Automatic Close and Manual Open—Automatic-close clamps close under their own weight; as the load increases, so does the grip.

Manual Close with Lock—Manual-close clamps have a locking mechanism to keep them open for easy loading or closed to prevent accidental release.

Smooth Grip—Clamps with a smooth grip won't damage surfaces, so they're ideal for handling soft and delicate materials.

					Overall		Eye
	Wt. Cap. per Pair, lb.	For Max. Thk.	Gripping Method	Grip Type	Wd.	Ht.	Dia.	Movement	For Max. Hardness	Specs. Met		Pair
Automatic Close and Manual Open



		1,000	1"	—	Smooth	6 1/8"	6 1/2"	1 1/4"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T11	0000000


		1,000	1"	Teeth	—	6 1/8"	6 1/2"	1 1/4"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T2	000000
		2,000	2 1/2"	—	Smooth	8"	11"	1 1/2"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T12	000000
		2,000	2 1/2"	Teeth	—	8"	11"	1 1/2"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T3	000000
		6,000	2 1/2"	Teeth	—	8 5/16"	11 1/2"	1 1/2"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T5	000000
		16,000	3"	Teeth	—	10 7/8"	15"	1 3/4"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T6	00000000


		Manual Close with Lock and Manual Open with Lock



				4,000	1"	Teeth	—	8 3/8"	11 3/4"	2 1/4"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T81	00000000


				8,000	1 1/2"	Teeth	—	9 1/2"	15 3/8"	3"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T82	00000000

Long-Arm Lifting Tongs


Lifting Tongs	Caldwell Lifting Tongs

Also known as die-lifting tongs, these tongs can be used to lift tall objects and reach into machinery. As you lift these tongs, their scissor-action grip increases. They’re yellow for high visibility in busy areas.

Warning: Never use to lift items over people.

Powder-Coated Steel—Powder-coated steel tongs resist corrosion in wet environments.

	Lifting Tongs													Replacement Shackles
				Overall
	Wt. Cap., lb.	For Max. Wd.	For Max. Thk.	Wd. When Open	Ht. When Open	Eye Dia.	Material	Color	Wt., lb.	Specs. Met	Country of Origin		Each		Each
Lifting Tongs



		2,000	20"	9"	37"	29"	1 1/2"	Powder-Coated Steel	Yellow	70	ASME B30.20	United States	22735T111	0000000	22735T113	000000


		3,000	38"	14"	58"	50"	1 1/2"	Powder-Coated Steel	Yellow	100	ASME B30.20	United States	22735T112	000000	22735T113	00000


		Caldwell Lifting Tongs



				2,000	20"	7"	30"	29"	4"	Painted Steel	Yellow	30	ASME B30.20	United States	22735T31	00000000	3555T51	00000


				3,000	38"	10 3/4"	52"	47 1/2"	6"	Painted Steel	Yellow	90	ASME B30.20	United States	22735T33	00000000	3555T52	00000

Drum Slings


Style B	Style D	Style E	Style F

Image of Specification. Front orientation. Contains Annotated. Near-Vertical Drum.

Lift heavy drums without risking injuries and chemical spills. These slings are cost-effective compared to drum lifters, but you may need an extra person to guide loads since drums can sway.

Vertical Lift


Style B

Move upright drums on and off pallets and trucks.

Steel Clamps—Two spring-loaded clamps snap onto the drum rim and hold tight, so your drum won’t slip from jolts and sudden stops. Although they're more secure than hook grips, they can dent your drums.

		For Drum						Eye
	Style	Cap., gal.	Max. Dia.	Wt. Cap., lb.	Drum Attachment Location	Body Material	Hook Opening Wd.	Lg.	Wd.	Specs. Met		Each
Steel Clamps



		B	30, 55	25"	2,000	Rim	Steel	1"	3 1/2"	2 1/2"	ASME B30.26	3389T6	0000000

Horizontal Lift


Style D

Load and unload drums onto stackable drum racks, drum dispensing stands, and drum mixers.

Aluminum-Bronze Hooks—Prevent sparks when hooks scrape against metal drums in locations with combustible vapors or residues. With 304 stainless steel legs, they won’t rust in damp and humid locations.

Iron Hooks—These hooks are reliable for most applications but are less corrosion-resistant than steel.

		For Drum							Eye
	Style	Cap., gal.	Max. Ht.	Wt. Cap., lb.	Drum Attachment Location	Body Material	Bar Dia.	Hook Opening Wd.	Lg.	Wd.	Specs. Met		Each
Aluminum-Bronze Hooks



		D	55	36"	1,000	Rim	304 Stainless Steel	1/2"	3/4"	3"	2 3/4"	—	3401T6	0000000


		Iron Hooks



				D	30, 55	36"	1,000	Rim	Steel	1/2"	2 1/8"	4"	4 1/2"	ASME B30.26	3401T8	00000

Horizontal and Near Vertical Lift


Style E	Style F

Load and unload drums onto stackable drum racks, drum dispensing stands, and drum mixers.

Lift drums at a slight tilt and lower them one edge at a time for smooth vertical and horizontal stacking. They also position drums at the optimal angle to drain contents. Use the end ring for near-vertical lifts, and switch to the center ring for horizontal handling.

Steel Hooks—Your go-to for most jobs, the steel hooks lift drums by their rims.

		For Drum
	Style	Cap., gal.	Max. Ht.	Wt. Cap., lb.	Drum Attachment Location	Body Material	Bar Dia.	Hook Opening Wd.	Eye Dia.	Specs. Met		Each
Steel Hooks



		E	55	38"	1,100	Rim	Steel	—	13/16"	2 1/2", 3 1/2"	—	3615T14	0000000


		F	55, 85	41"	2,000	Rim	Steel	5/8"	1 1/4"	3"	ASME B30.9	3615T21	000000

Vertical-Lift Plate Clamps


A	B	C	Vertical Material Position

Use these clamps to raise a metal plate straight up from its original vertical position.

Warning: Never use to lift people or items over people.

Automatic Close—Automatic close clamps close under their own weight; as the load increases, so does the grip.

Automatic Close with Lock— Automatic close clamps close under their own weight; as the load increases, so does the grip. Clamps with a lock stay closed to prevent accidental release.

Automatic Open—Automatic open clamps open automatically when they are not under load so you can easily insert a new plate.

Manual Open with Lock and Remote Release—Manual open with lock and remote release clamps have a pull chain so you can open them remotely when they are not under load. They lock when open for easy loading.

Screw Grip—Clamps with screw grip are not for use on hardened alloy plates.

	Clamps															Replacement Grippers
						Overall		Eye
	Style	Wt. Cap., lb.	For Max. Thk.	Gripping Method	Opening Ht.	Wd.	Ht.	Dia.	Lg.	Wd.	Movement	For Max. Hardness	Specs. Met		Each		Each
Automatic Close and Automatic Open



		A	500	5/16"	Teeth	1 7/8"	3 3/4"	8"	—	1 1/2"	1"	Rigid	Brinell 400, Rockwell C43	—	3359T15	0000000	———	0


		Automatic Close with Lock and Manual Open with Lock and Remote Release



				B	1,000	3/4"	Teeth	2 13/16"	4 5/8"	11 1/4"	2 3/8"	—	—	Rigid	Brinell 300, Rockwell C33	ASME B30.20	3352T19	000000	3352T33	0000000


				B	2,000	3/4"	Teeth	3 3/16"	5 7/8"	13 3/4"	2 5/8"	—	—	Rigid	Brinell 300, Rockwell C33	ASME B30.20	3352T21	000000	3352T34	000000
				B	4,000	1"	Teeth	3 1/2"	6 3/4"	16 3/8"	3 5/8"	—	—	Rigid	Brinell 300, Rockwell C33	ASME B30.20	3352T22	00000000	3352T35	000000


				Manual Close and Manual Open



						C	5,000	1"	Screw	4"	5 1/2"	14 1/2"	—	6"	2 1/2"	Rigid	Brinell 300, Rockwell C32	ASME B30.20	3357T1	000000	3357T11	000000


						C	5,000	2"	Screw	4"	7 1/2"	14 1/2"	—	6"	2 1/2"	Rigid	Brinell 300, Rockwell C32	ASME B30.20	3357T3	000000	3357T13	000000

Beam Clamps with Tie Wire Hangers

Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material. Hammer the clamp onto a beam to install.

		For Beam Thk.				Tie Wire
	For Beam Shape	Min.	Max.	Wt. Cap.	Mount Type	Lg., ft.	Gauge		Each
Bottom and Top Beam Mount







				Steel

				Flat	1/8"	1/4"	Not Rated	Press Fit	6	12	5326K17	00000


				Flat	5/16"	1/2"	Not Rated	Press Fit	6	12	5326K19	0000

Beam-Lifting Tongs

Apply tension to the lifting eye and the scissor-action grip firmly grabs flat and tapered beams. As the tongs lift, the grip increases.

Warning: Never use to lift items over people.

	For Beam			Closed
Wt. Cap., lb.	Shape	Max. Wd.	Max. Thk.	Wd.	Ht.	Eye Dia.	Material	Wt., lb.	Features	Specs. Met	Country of Origin		Each



	2,000	Taper, Flat	10"	1"	7 1/2"	25"	4"	Steel	20	Hold-Open Latch	ASME B30.20	United States	3367T1	0000000


	3,000	Taper, Flat	5"	5/8"	6 1/2"	14"	4"	Steel	15	Hold-Open Latch	ASME B30.20	United States	3367T6	000000
	6,000	Taper, Flat	8"	1"	9 1/2"	21"	4"	Steel	35	Hold-Open Latch	ASME B30.20	United States	3367T3	000000

Nonmarring Vertical-Lift with 180° Flip Plate Clamps

Pads on these clamps prevent the grip from biting into the load. They can take a metal plate of any hardness that is stacked horizontally, lift it vertically, and then place it down horizontally on its other side. Clamps close under their own weight; as the load increases, so does the grip. The lock keeps them closed to prevent accidental release. Clamps automatically open and lock when they are not under load so a new plate can be easily inserted. They have an eye that pivots to allow lifting angles up to 15° without reducing the capacity. The eye adjusts to accommodate unbalanced loads.

Warning: Never use to lift people or items over people.

	Clamps											Replacement Grippers
					Overall		Eye
	Wt. Cap., lb.	For Max. Thk.	Gripping Method	Opening Ht.	Wd.	Ht.	Dia.	Movement	Specs. Met		Each		Each
Automatic Close with Lock and Automatic Open with Lock



		1,100	3/8"	Pad	3 1/4"	5"	10"	1 9/16"	15° Pivot	ASME B30.20	8804T51	000000000	8845T372	0000000


		2,200	3/4"	Pad	4 5/16"	7 1/4"	12 1/8"	1 3/16"	15° Pivot	ASME B30.20	8804T52	00000000	8845T371	000000

Vertical-Lift with 90° Tilt Plate Clamps


Automatic Close	Automatic Close with Lock

Clamps can take a metal plate that is stacked horizontally and tilt it up 90° so it can be lifted in a vertical position. After lifting, clamps can place the plate back down in the original position (plate can not be flipped over).

Warning: Never use to lift people or items over people.

Automatic Close and Manual Open—Automatic close clamps close under their own weight; as the load increases, so does the grip.

Automatic Close with Lock—Automatic close clamps close under their own weight; as the load increases, so does the grip. Clamps with a lock stay closed to prevent accidental release.

Manual Open with Lock and Remote Release—Manual open with lock and remote release clamps have a pull chain so they can open remotely when they are not under load. They lock when open for easy loading.

	Clamps														Replacement Grippers		Replacement Lifting Eyes
		For Thk.				Overall		Eye
	Wt. Cap., lb.	Min.	Max.	Gripping Method	Opening Ht.	Wd.	Ht.	Lg.	Wd.	Movement	For Max. Hardness	Specs. Met		Each		Each		Each
Automatic Close and Manual Open



		1,100	1/16"	5/8"	Teeth	2 3/16"	4"	11 13/16"	2 3/4"	2"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T62	0000000	8857T26	0000000	8857T19	0000000


		Automatic Close with Lock and Manual Open with Lock and Remote Release



				6,600	1/16"	1 1/4"	Teeth	4 3/8"	7 1/4"	14 3/8"	3 1/2"	2"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T14	00000000	8857T51	000000	———	0


				11,000	1/16"	1 1/2"	Teeth	5"	8 7/8"	16"	3 1/2"	2 1/2"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T15	00000000	8857T52	000000	———	0

Nonmarring Vertical-Lift Plate Clamps


Manual Lock	Automatic Lock	Vertical Material Position

Pads on these clamps stop the grip from biting into the load. Use them to raise a metal plate of any hardness straight up from its original vertical position. Clamps close automatically under their own weight; as the load increases, so does the grip. They open automatically when they are not under load, so you can insert a new plate. All clamps have a lock to prevent accidental release. They rotate 360°, so you can easily position your load where you need to.

To make sure the grip is secure for safe lifting, only use these clamps within their capacity.

Warning: Never use to lift people or items over people.

Manual Lock—Clamps with manual lock secure to a load when you latch them.

Automatic Lock—Clamps with automatic lock secure automatically when positioned around a load. They’re quicker to use than clamps with an automatic lock.

	Clamps												Replacement Grippers
		For Thk.				Overall		Eye
	Wt. Cap., lb.	Min.	Max.	Gripping Method	Opening Ht.	Wd.	Ht.	Dia.	Movement	Specs. Met		Each		Each
Automatic Close with Manual Lock and Automatic Open with Manual Lock



		110 to 2,860	3/8"	1 15/16"	Pad	8 1/2"	7 1/8"	14 1/8"	1"	Rigid	ASME B30.20	8804T55	0000000	8804T74	0000000


		110 to 3,300	1 3/16"	2 15/16"	Pad	10 1/4"	8 1/2"	15 7/8"	1"	Rigid	ASME B30.20	8804T56	00000000	8804T75	000000


		Automatic Close with Automatic Lock and Automatic Open with Automatic Lock



				110 to 2,860	3/16"	1 9/16"	Pad	9 1/8"	6 3/4"	15 1/8"	13/16"	Rigid	ASME B30.20	8804T111	000000	8804T113	000000


				110 to 3,300	13/16"	2 3/8"	Pad	10 3/8"	8 1/8"	16 3/4"	13/16"	Rigid	ASME B30.20	8804T112	00000000	8804T114	000000

Wire Rope Pulling Clamps

Attach these clamps by running a wire rope through the jaws to create an attachment point anywhere along the wire rope. The eye is often used with a ratchet puller.

			Eye
For Wire Rope Dia.	Cable Guide Lg.	Wt. Cap., lb.	Lg.	Wd.	Application	With Latch	Material	For Rope Material		Each



	0.28" to 3/4"	2 1/2"	8,000	1 7/8"	1 5/16"	Not for Lifting	Yes	Steel	Steel	7285K8	0000000


	1/2" to 1"	2 1/2"	8,000	1 13/16"	1 3/16"	Not for Lifting	Yes	Steel	Steel	7285K22	000000

Handheld Vertical-Lift Plate Clamps


	Vertical Material Position

Lift metal plates by hand. Clamps close under its own weight; as the lift increases, so does the grip. They open automatically when not under load so you can easily insert a new plate.

Warning: Never use to lift items over people.

			Overall
Wt. Cap., lb.	For Max. Thk.	Opening Ht.	Wd.	Ht.	For Max. Hardness	Material	Material Position		Each
500	5/16"	1 7/8"	4"	6"	Brinell 400, Rockwell C43	Steel	Vertical	3359T14	0000000

Pipe-Lifting Tongs

Attach these tongs to a crane, hoist, or other lifting device to move heavy pipes. When you pull on the top ring, the jaws tighten firmly around your pipe. Arms on each side, called outriggers, keep the pipe from seesawing as you move it. These tongs have a yellow powder coating that helps prevent corrosion and makes them easy to spot.

Warning: Never use to lift items over people.

		Closed		Eye
Wt. Cap., lb.	For Pipe OD	Wd.	Ht.	ID	Lg.	Material	Color	Wt., lb.	Country of Origin		Each



	600	4 1/2" to 4 3/4"	6"	18 3/4"	1 3/16"	1 1/2"	Powder-Coated Steel	Yellow	20	United States	9164N11	0000000


	1,000	5 1/2" to 7"	9"	24 3/4"	1 3/16"	1 3/4"	Powder-Coated Steel	Yellow	25	United States	9164N12	000000
	2,000	10 3/4" to 11"	17"	36 1/4"	1 9/16"	1 7/8"	Powder-Coated Steel	Yellow	75	United States	9164N13	000000