Keep eye wash solution handy when you're on the go. Use these in addition to an ANSI-compliant station for areas that need immediate access to eye wash. They cannot be sold outside the United States due to product registration requirements.

Station comes ready to attach to your faucet. To install, remove the aerator and thread the eye wash onto the faucet. An on/off valve allows the faucet to function normally after installation.

Rinse chemicals from your eyes, hands, and body when ANSI-compliant decontamination stations aren't immediately available. Often used in remote areas where chemicals are moved, stirred, poured, and sprayed, these kits have everything you need for emergency treatment in the field. They include eyewash, jugs for water, soap, towels, and coveralls to change out of contaminated clothes. Packed in a bright yellow duffel bag, these kits are easy to spot. Note: They are not a substitute for ANSI-compliant eye wash stations.

Station comes ready to attach to your faucet. To install, remove the aerator and thread the eye wash onto the faucet. An on/off valve allows the faucet to function normally after installation.

For jobs that require mobility, this station delivers a continuous flow of water without plumbing.

To operate, fill the reservoir with water and add the included 8-fl. oz. bottle of water additive. After filing with water, pressurize the unit to 80 PSI air pressure.

Plug this station in and the thermostat keeps eye wash solution at a comfortable temperature in environments as cold as -20° F.

No plumbing required—station holds 16 gal. of eye wash solution. To mix your own solution, pour an 8-fl. oz. bottle of water additive or 1.4-gal. bottle of saline concentrate into the reservoir and then fill with water (both sold separately).

For a ready-to-use solution, fill the reservoir with saline (sold separately).

Mount these stations next to a sink—water flow is activated by swinging the unit 90° from the storage position. Stations connect to your facility's plumbing and require very little maintenance to comply with ANSI standards. Use a mixing valve (sold separately) to ensure water flows at a comfortable temperature.

Once connected to your facility's plumbing, these stations require very little maintenance to comply with ANSI standards. Use a mixing valve (sold separately) to ensure water flows at a comfortable temperature.

Stations with eye and face coverage provide greater flow than stations with eye coverage.

Stations made of stainless steel withstand corrosive chemicals.

Plug this station in and the thermostat keeps water at a comfortable temperature in environments as cold as -20° F. Good for jobs that require mobility, the station delivers a continuous flow of water without plumbing.

To operate, fill the reservoir with water and add the included 8-fl. oz. bottle of water additive. After filing with water, pressurize the unit to 80 PSI air pressure.

Bolt in the floor-mount flange and connect the pipe to your facility's plumbing to use these freestanding stations. Once connected, they require very little maintenance to comply with ANSI standards. Use a mixing valve (sold separately) to ensure water flows at a comfortable temperature.

Stations with eye and face coverage provide greater flow than stations with eye coverage.

Stations made of stainless steel withstand corrosive chemicals.

No plumbing required—this station holds 16 gal. of eye wash solution. To mix your own solution, pour the included 8-fl. oz. bottle of water additive or a 1.4-gal. bottle of saline concentrate (sold separately) into the reservoir and then fill with water.

For a ready-to-use solution, fill the reservoir with saline (sold separately).

Mount your eye wash station over the optional eye wash fluid container (sold separately) to capture used fluid when a floor drain isn't available.

The hose gives you longer reach than other eye wash stations. Direct the flow of water to rinse any part of your face or body. Stations connect to your facility's plumbing and require very little maintenance to comply with ANSI standards. Use a mixing valve (sold separately) to ensure water flows at a comfortable temperature.

The easy-to-install saline cartridges used in these stations can go four times longer without being changed than the solution used in our other stations. A side window displays the cartridge's expiration date. Requires one cartridge (sold separately). No plumbing required. Stations and required saline cartridges cannot be sold outside the United States due to product registration requirements.