An eye wash station on these faucets flushes contaminants from your eyes. Ready in an emergency, you don't have to adjust the water temperature before use. To activate the station, press down on the large handle. Attach the eye wash nozzle to a mixing valve (not included) to ensure water is tempered.

These faucets are ADA compliant because the handles only need a small push to start the flow of water. To ensure they are wheelchair accessible, install them so that the spout and handles are no higher than 48" from the floor. They meet ANSI Z358.1 and the performance and design requirements for plumbing supply fittings specified by ASME A112.18.1/CSA B125.1.

Station comes ready to attach to your faucet. To install, remove the aerator and thread the eye wash onto the faucet. An on/off valve allows the faucet to function normally after installation.

Mount these stations next to a sink—water flow is activated by swinging the unit 90° from the storage position. Stations connect to your facility's plumbing and require very little maintenance to comply with ANSI standards. Use a mixing valve (sold separately) to ensure water flows at a comfortable temperature.

Plug this station in and the thermostat keeps water at a comfortable temperature in environments as cold as -20° F. Good for jobs that require mobility, the station delivers a continuous flow of water without plumbing.

To operate, fill the reservoir with water and add the included 8-fl. oz. bottle of bacteriostatic additive. After filing with water, pressurize the unit to 80 PSI air pressure.

For jobs that require mobility, this station delivers a continuous flow of water without plumbing.

To operate, fill the reservoir with water and add the included 8-fl. oz. bottle of bacteriostatic additive. After filing with water, pressurize the unit to 80 PSI air pressure.

Bolt in the floor-mount flange and connect the pipe to your facility's plumbing to use these freestanding stations. Once connected, they require very little maintenance to comply with ANSI standards. Use a mixing valve (sold separately) to ensure water flows at a comfortable temperature.