Filter by
Thread Size
Finish
Movement
Thread Length
Vertical Capacity
Overall Height
Load Securement Type
Height
Installation Torque
Certification
Application
Performance
Safety Factor
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Mounting Location
Hoist Rings—For Lifting
 | |
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
Machined—Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Nickel-Plated Steel—More corrosion resistant than black-oxide or zinc-plated steel hoist rings.
CE Marked—Hoist rings that are CE marked meet European safety standards.
Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vert. Cap., lb. | Movement | Specs. Met | Certification | Mil. Spec. | 1-9 | 10-Up | |||
Forged Nickel-Plated Steel | |||||||||||||
| 1/4"-20 | 1/2" | 15/16" | 3 1/4" | 600 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T311 | 0000000 | 0000000 | ||
| 5/16"-18 | 9/16" | 1 1/4" | 3 7/8" | 800 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T36 | 000000 | 000000 | ||
| 3/8"-16 | 9/16" | 1 1/4" | 3 7/8" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T37 | 000000 | 000000 | ||
| 1/2"-13 | 3/4" | 2" | 6 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T38 | 000000 | 000000 | ||
| 1/2"-13 | 1 1/4" | 1 3/4" | 8 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T312 | 000000 | 000000 | ||
| 5/8"-11 | 1" | 2" | 6 3/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T39 | 000000 | 000000 | ||
| 5/8"-11 | 1 1/4" | 1 3/4" | 8 1/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T313 | 000000 | 000000 | ||
| 3/4"-10 | 1" | 2" | 6 3/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T48 | 000000 | 000000 | ||
| 3/4"-10 | 1 1/4" | 3" | 8 5/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T49 | 000000 | 000000 | ||
| 1"-8 | 1 1/2" | 3" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T86 | 000000 | 000000 | ||
| 1 1/4"-7 | 1 7/8" | 4" | 11 1/8" | 15,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T87 | 000000 | 000000 | ||
| 1 1/2"-6 | 2 5/8" | 4" | 11 7/8" | 24,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T88 | 000000 | 000000 | ||
| 2"-4 1/2 | 3" | 4" | 12 1/4" | 30,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T89 | 000000 | 000000 | ||
| M8 × 1.25 mm | 16 mm | 33 mm | 98 mm | 875 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T91 | 000000 | 000000 | ||
| M10 × 1.5 mm | 16 mm | 33 mm | 98 mm | 975 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T92 | 000000 | 000000 | ||
| M12 × 1.75 mm | 25 mm | 50 mm | 160 mm | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T93 | 000000 | 000000 | ||
| M14 × 2 mm | 25 mm | 50 mm | 161 mm | 3,300 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T94 | 000000 | 000000 | ||
| M16 × 2 mm | 24 mm | 46 mm | 149 mm | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T314 | 000000 | 000000 | ||
| M16 × 2 mm | 25 mm | 50 mm | 160 mm | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T95 | 000000 | 000000 | ||
| M20 × 2.5 mm | 25 mm | 50 mm | 160 mm | 4,850 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T96 | 000000 | 000000 | ||
| M24 × 3 mm | 28 mm | 71 mm | 216 mm | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T97 | 000000 | 000000 | ||
| M30 × 3.5 mm | 38 mm | 71 mm | 226 mm | 9,900 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T98 | 000000 | 000000 | ||
Machined Nickel-Plated Steel | |||||||||||||
| 5/16"-18 | 9/16" | 13/16" | 3 1/4" | 800 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T21 | 000000 | 000000 | ||
| 3/8"-16 | 9/16" | 13/16" | 3 1/4" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T22 | 000000 | 000000 | ||
| 1/2"-13 | 3/4" | 1 3/4" | 5 5/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T24 | 000000 | 000000 | ||
| 1/2"-13 | 3/4" | 1 3/4" | 7 1/2" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T25 | 000000 | 000000 | ||
| 1/2"-13 | 1" | 1 3/4" | 5 7/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T71 | 000000 | 000000 | ||
| 1/2"-13 | 1 1/16" | 1 3/8" | 4 7/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T23 | 000000 | 000000 | ||
| 1/2"-13 | 1 1/4" | 1 3/4" | 6 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T26 | 000000 | 000000 | ||
| 5/8"-11 | 1" | 1 3/4" | 5 7/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T27 | 000000 | 000000 | ||
| 5/8"-11 | 1" | 1 3/4" | 7 3/4" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T28 | 000000 | 000000 | ||
| 5/8"-11 | 1 1/4" | 1 3/4" | 6 1/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T29 | 000000 | 000000 | ||
| 3/4"-10 | 1" | 1 3/4" | 5 7/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T31 | 000000 | 000000 | ||
| 3/4"-10 | 1" | 2 3/4" | 7 5/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T72 | 000000 | 000000 | ||
| 3/4"-10 | 1 1/2" | 1 3/4" | 6 3/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T32 | 000000 | 000000 | ||
| 3/4"-10 | 1 1/2" | 1 3/4" | 8 1/4" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T33 | 000000 | 000000 | ||
| 3/4"-10 | 1 1/2" | 2 3/4" | 8 1/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T73 | 000000 | 000000 | ||
| 7/8"-9 | 1" | 2 3/4" | 7 5/8" | 8,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T74 | 000000 | 000000 | ||
| 1"-8 | 1 1/4" | 2 3/4" | 7 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T34 | 000000 | 000000 | ||
| 1"-8 | 1 1/2" | 2 3/4" | 8 1/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T75 | 000000 | 000000 | ||
| 1"-8 | 2 1/4" | 2 3/4" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T35 | 000000 | 000000 | ||
| M8 × 1.25 mm | 13 mm | 21 mm | 81 mm | 875 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T41 | 000000 | 000000 | ||
| M10 × 1.5 mm | 18 mm | 21 mm | 86 mm | 975 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T42 | 000000 | 000000 | ||
| M12 × 1.75 mm | 19 mm | 44 mm | 142 mm | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T43 | 000000 | 000000 | ||
| M16 × 2 mm | 29 mm | 44 mm | 152 mm | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T44 | 000000 | 000000 | ||
| M20 × 2.5 mm | 34 mm | 44 mm | 157 mm | 4,725 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T45 | 000000 | 000000 | ||
| M24 × 3 mm | 37 mm | 71 mm | 200 mm | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Proof Test Certificate | MIL-STD-1365, MIL-STD-209 | 3145T46 | 000000 | 000000 | ||
Magnetic Tie-Down Rings
 |
Use these rings to create a temporary anchor point on ferrous metal surfaces. Turn the handle to engage the magnet.
Note: Capacity is based on direct contact on a flat, smooth, untreated surface. Variations in mounting surface conditions will reduce capacity.
Warning: Never use for lifting applications.
Ring | Handle | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wt. Cap., lb. | Inner Wd. | Style | Lg. | Wd. | Overall Ht. | Housing Material | Material | Color | Magnet Type | For Max. Surface Thk. | Each | |||
| 35 | 1/2" | Round Ring | 4 1/8" | 1 13/16" | 2 3/4" | Nickel-Plated Steel | Powder-Coated Aluminum | Black | Rare Earth | 1/4" | 3154T4 | 0000000 | ||
Screw-Locking-Latch Carabiners—Not for Lifting
 |  |  |
Style 3 | Straight Open Latch Position |
Style | Wt. Cap., lb. | Thk. | Opening Wd. | Inside Lg. | Narrow End Inside Wd. | Open Latch Position | Locking Indicator | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Nickel-Plated Steel | |||||||||||
| 3 | 5,100 | 3/8" | 9/16" | 3 7/16" | 1 3/16" | Straight | No | 3216T41 | 00000 | ||
Webbing Guides
 |  |
Shown with Webbing Threaded (Webbing Not Included) | Shown with Webbing Anchored (Webbing Not Included) |
Steel%20--%3e%3csvg%20version='1.1'%20id='Layer_1'%20xmlns='http://www.w3.org/2000/svg'%20xmlns:xlink='http://www.w3.org/1999/xlink'%20x='0px'%20y='0px'%20viewBox='0%200%20400%20400'%20style='enable-background:new%200%200%20400%20400;'%20xml:space='preserve'%3e%3cstyle%20type='text/css'%3e%20.st0{fill:%231A70A0;}%20.st1{opacity:0.5;}%20%3c/style%3e%3cg%3e%3cg%3e%3cpath%20class='st0'%20d='M200,56.9c38.35,0,74.4,14.93,101.51,42.05c27.11,27.11,42.05,63.17,42.05,101.51s-14.93,74.4-42.05,101.51%20S238.35,344.02,200,344.02s-74.4-14.93-101.51-42.05c-27.11-27.11-42.05-63.17-42.05-101.51s14.93-74.4,42.05-101.51%20S161.65,56.9,200,56.9%20M200,12.9C96.41,12.9,12.44,96.88,12.44,200.46c0,103.59,83.97,187.56,187.56,187.56%20c103.59,0,187.56-83.97,187.56-187.56C387.56,96.88,303.59,12.9,200,12.9L200,12.9z'/%3e%3c/g%3e%3cg%3e%3cg%20class='st1'%3e%3cpath%20class='st0'%20d='M235.49,152.24h16.15l-27.46,111.87c-1.94,7.8-2.91,12.5-2.91,14.1c0,1.82,0.58,3.29,1.73,4.41%20c1.16,1.12,2.69,1.68,4.61,1.68c5.23,0,11.78-3.85,19.63-11.55l17.22,21.34c-16.95,17.33-34.87,26-53.78,26%20c-8.37,0-15.45-1.47-21.23-4.41c-5.79-2.94-10.44-7.25-13.95-12.92c-3.51-5.67-5.27-11.18-5.27-16.53c0-1.93,0.35-5.24,1.05-9.94%20c1-6.94,2.05-12.54,3.15-16.82l15.22-62.15h-32.69l7.65-30.97C190.89,163.58,214.53,158.88,235.49,152.24z%20M230.44,80.84%20c8.24,0,14.66,2.62,19.26,7.86c4.6,5.24,6.9,11.55,6.9,18.94c0,5.46-1.42,10.7-4.25,15.73c-2.83,5.03-6.88,9.07-12.12,12.12%20c-5.24,3.05-10.33,4.57-15.24,4.57c-4.6,0-9.17-1.23-13.72-3.69c-4.55-2.46-8.02-5.78-10.43-9.95%20c-2.41-4.17-3.61-8.67-3.61-13.48c0-5.35,1.52-10.64,4.57-15.89c3.05-5.24,7.03-9.25,11.96-12.04%20C218.68,82.23,224.24,80.84,230.44,80.84z'/%3e%3c/g%3e%3cg%3e%3cpath%20class='st0'%20d='M214.08,152.24h16.15l-27.46,111.87c-1.94,7.8-2.91,12.5-2.91,14.1c0,1.82,0.58,3.29,1.73,4.41%20c1.16,1.12,2.69,1.68,4.61,1.68c5.23,0,11.78-3.85,19.63-11.55l17.22,21.34c-16.95,17.33-34.87,26-53.78,26%20c-8.37,0-15.45-1.47-21.23-4.41c-5.79-2.94-10.44-7.25-13.95-12.92c-3.51-5.67-5.27-11.18-5.27-16.53c0-1.93,0.35-5.24,1.05-9.94%20c1-6.94,2.05-12.54,3.15-16.82l15.22-62.15h-32.69l7.65-30.97C169.48,163.58,193.11,158.88,214.08,152.24z%20M209.03,80.84%20c8.24,0,14.66,2.62,19.26,7.86c4.6,5.24,6.9,11.55,6.9,18.94c0,5.46-1.42,10.7-4.25,15.73c-2.83,5.03-6.88,9.07-12.12,12.12%20c-5.24,3.05-10.33,4.57-15.24,4.57c-4.6,0-9.17-1.23-13.72-3.69c-4.55-2.46-8.02-5.78-10.43-9.95%20c-2.41-4.17-3.61-8.67-3.61-13.48c0-5.35,1.52-10.64,4.57-15.89c3.05-5.24,7.03-9.25,11.96-12.04%20C197.26,82.23,202.83,80.84,209.03,80.84z'/%3e%3c/g%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
 |
Steel guides are the most common. They are coated or plated to prevent rust.
Nickel-Plated Steel—Those with a nickel plating resist scratches.
Mounting Holes | Pkg. of 10 | Pkg. of 100 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Webbing Wd. | Work Load Limit | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. | Pkg. | ||||
Nickel-Plated Steel—Dull | |||||||||||||||
| 1" | Not Rated | 2 7/16" | 7/16" | 1/4" | 1/4" | No | 2 | 3/16" | 1 15/16" | 8030T121 | 00000 | 8030T117 | 000000 | ||
| 1 1/2" | Not Rated | 2 15/16" | 7/16" | 1/4" | 1/4" | No | 2 | 3/16" | 2 7/16" | 8030T122 | 0000 | 8030T118 | 00000 | ||
| 2" | Not Rated | 3 5/8" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 3 1/8" | 8030T126 | 00000 | ——— | 0 | ||
