1/2"-20 Eyebolts | McMaster-Carr

Filter by

System of Measurement

Body Style

Shank Length

Material

Shank Gender

Shank Thread Size

Eye Diameter

Vertical Capacity

Rod End Type

Thread Length

Eye Type

Finish

Threading

Overall Length

Overall Thickness

Shank Thread Direction

Length

Shank Center Length

Application

Export Control Classification Number (ECCN)

REACH

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

46 Products

Eyebolts—For Lifting

Create a secure attachment point for hooks, shackles, and other lifting equipment. Also known as machinery eyebolts, these eyebolts are used to lift heavy machines and materials. They have a closed eye that won’t bend under strain.

Warning: Never use to lift people or items over people. Capacities listed are for vertical lifting only.

Steel


With Shoulder	Without Shoulder

With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.

Without Shoulder—For vertical lifting only.

	Thread						With Shoulder			Without Shoulder
	Size	Lg.	Shank Lg.	Eye Dia.	Vert. Cap., lb.	Threading	Overall Lg.		Each	Overall Lg.		Each
Closed Eye



		1/2"-20	1 1/2"	1 1/2"	1 3/16"	2,600	Fully Threaded	4"	3014T259	00000	3 1/2"	3013T344	00000


		1/2"-20	2 1/2"	2 1/2"	1 3/16"	2,600	Fully Threaded	4 7/8"	3014T263	00000	4 1/2"	3013T126	00000

Zinc-Plated Steel


With Shoulder	Without Sholder

Zinc-plated steel eyebolts offer good corrosion resistance.

With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.

Without Shoulder—For vertical lifting only.

	Thread						With Shoulder			Without Shoulder
	Size	Lg.	Shank Lg.	Eye Dia.	Vert. Cap., lb.	Threading	Overall Lg.		Each	Overall Lg.		Each
Closed Eye



		1/2"-20	1 1/2"	1 1/2"	1 3/16"	2,600	Fully Threaded	4"	3014T118	000000	3 1/2"	3013T143	00000


		1/2"-20	2 1/2"	2 1/2"	1 3/16"	2,600	Fully Threaded	4 7/8"	3014T119	00000	4 1/2"	3013T144	00000

Vibration-Damping Rod End Bolts

To reduce noise and vibration, these bolts have a rubber bushing—connect them to rods, pipes, tubes, and cable linkages that have female threading. They also make up for changes in alignment. Use them in hydraulic systems, steering pumps, control cables, vehicle suspensions, and pivot and hinge movements. They’re also known as isolated rod ends.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Overall Wd.	Shank Threading	Overall Thk.	Tensile Strength	Features		Each
Right-Hand Shank Thread







				Zinc-Plated Carbon Steel

				1/2"-20	2 7/16"	1 1/2"	1/2"	1 3/8"	Fully Threaded	31/32"	Not Rated	Rubber Bushing	8982N11	000000

Ball Joint Rod Ends

Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate during installation and on an ongoing basis.

Oversized Shank—Rod ends with an oversized shank have a shank that is one size larger than the ID to handle greater stress.

Zinc-Plated Carbon Steel—Zinc-plated steel rod ends provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 7/16"	1 1/2"	1/2"	20°	1 5/16"	5/8"	10,000	Zinc-Plated Carbon Steel	Right Hand, Left Hand	60645K16	00000


		Ball Joints with Oversized Shank



				1/2"-20	2 1/8"	1 3/8"	3/8"	22°	1 1/8"	1/2"	8,250	Zinc-Plated Carbon Steel	Right Hand, Left Hand	60645K85	0000

Corrosion-Resistant Fully Threaded Rod End Bolts


303 Stainless Steel	Black-Oxide 303 Stainless Steel

304 Stainless Steel	17-4 PH Stainless Steel

316 Stainless Steel

These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.

303 Stainless Steel and 304 Stainless Steel—303 and 304 stainless steel rod end bolts won't rust in humid, wet, and washdown environments. They're stronger than brass bolts and nearly as strong as steel. They will rust when exposed to salt water and chemicals, however.

Black-Oxide 303 Stainless Steel—Black-oxide 303 stainless steel rod end bolts have a matte-black finish that adds some corrosion resistance but is mostly chosen for its looks.

17-4 PH Stainless Steel—17-4 PH stainless steel rod end bolts have the most tensile strength—a similar amount to high-strength alloy steel. They also won’t rust in humid, wet, and washdown environments. Even at high temperatures, they maintain their excellent strength and corrosion resistance, so they’re often used in automotive drive trains and heat exchangers. However, they’ll rust when exposed to salt water and chemicals.

316 Stainless Steel—316 stainless steel rod end bolts are our most corrosion resistant, and they're nearly as strong as steel rod end bolts. Use them in areas with salt water, chlorine, and chemicals without worrying about rust.

ASTM A193, ASTM A276, ASTM A564, and ASTM A582—ASTM rod end bolts meet a standard for material.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Overall Wd.	Shank Threading	Overall Thk.	Tensile Strength, psi	Specs. Met	Fastener Strength Grade/Class		Each
Right-Hand Shank Thread







				303 Stainless Steel

				1/2"-20	5"	4 3/16"	1/2"	1 1/32"	Fully Threaded	1/2"	90,000	ASTM A582	—	2434K515	000000




						Black-Oxide 303 Stainless Steel

						1/2"-20	3 1/2"	2 7/8"	1/2"	1 1/32"	Fully Threaded	1/2"	90,000	ASTM A582	—	2434K787	00000




								304 Stainless Steel

								1/2"-20	3 1/2"	2 7/8"	1/2"	1 1/32"	Fully Threaded	1/2"	75,000	ASTM A193	ASTM Grade B8	2434K52	00000




										17-4 PH Stainless Steel

										1/2"-20	3 1/2"	2 7/8"	1/2"	1 1/32"	Fully Threaded	1/2"	160,000	ASTM A564	—	2434K644	00000




												316 Stainless Steel

												1/2"-20	5"	4 3/16"	1/2"	1 1/32"	Fully Threaded	1/2"	75,000	ASTM A276	—	2434K568	00000

Internally Threaded Ball Joint Rod Ends

Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate them during installation and on an ongoing basis.

Zinc-Plated Carbon Steel—Zinc-plated steel rod ends provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	OD	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 1/8"	1 1/16"	1/2"	—	20°	1 5/16"	5/8"	10,000	Zinc-Plated Carbon Steel	Left Hand	60645K36	00000


		1/2"-20	2 1/8"	1 1/16"	1/2"	1 5/16"	20°	1 5/16"	5/8"	10,000	Zinc-Plated Carbon Steel	Right Hand	60645K361	0000

High-Strength Fully Threaded Rod End Bolts

These alloy steel rod end bolts have the highest tensile strength of any steel fully threaded rod end bolt we offer. For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Overall Wd.	Shank Threading	Overall Thk.	Tensile Strength, psi	Specs. Met	Fastener Strength Grade/Class		Each
Right-Hand Shank Thread







				Black-Oxide Alloy Steel

				1/2"-20	3 1/2"	2 7/8"	1/2"	1 1/32"	Fully Threaded	1/2"	125,000	ASTM A193	ASTM Grade B7	2440K53	000000

Fully Threaded Rod End Bolts

For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Overall Wd.	Shank Threading	Overall Thk.	Tensile Strength	Specs. Met		Each
Right-Hand Shank Thread







				Black-Oxide Carbon Steel

				1/2"-20	3 1/2"	2 7/8"	1/2"	1 1/32"	Fully Threaded	1/2"	Not Rated	ASTM A521 Grade CA	3798K53	000000

Ball Joint Rod Ends with Nut

For ease of installation, these rod ends come with a compatible jam nut. They have an eyelet and a ball that swivel to support angular misalignment. All are carbon steel, so they handle higher loads than stainless steel, aluminum, and nylon rod ends. However, they don’t resist corrosion. They need to be lubricated when first installed and periodically after that. Apply any type of bearing grease to the ball, and rotate it to work it into the races.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 7/16"	1 1/2"	1/2"	20°	1 5/16"	5/8"	10,000	Zinc-Plated Carbon Steel	Right Hand, Left Hand	4237N106	000000

Lubrication-Free Ball Joint Rod Ends

A carbon fiber-reinforced insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. All are zinc plated, so they resist corrosion for a short time before the finish is consumed and the steel is exposed.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 7/16"	1 1/2"	1/2"	12°	1 5/16"	5/8"	6,450	Zinc-Plated Carbon Steel	Right Hand, Left Hand	2458K16	000000

Internally Threaded Vibration-Damping Rod End Bolts

With a rubber bushing, these bolts reduce noise and vibration—attach them to rods, pipes, tubes, and cable linkages that have male threading. They also allow for changes in alignment. Use them in hydraulic systems, steering pumps, control cables, vehicle suspensions, and pivot and hinge movements. They’re commonly known as isolated rod ends.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Overall Wd.	Shank Threading	Overall Thk.	Tensile Strength	Features		Each
Right-Hand Shank Thread







				Zinc-Plated Carbon Steel

				1/2"-20	2 1/8"	1 3/16"	1/2"	1 5/16"	Fully Threaded	31/32"	Not Rated	Rubber Bushing	8983N13	000000


				Left-Hand Shank Thread







								Zinc-Plated Carbon Steel

								1/2"-20	2 1/8"	1 3/16"	1/2"	1 5/16"	Fully Threaded	31/32"	Not Rated	Rubber Bushing	8983N14	00000

Ball Joint Rod Ends with Grease Fitting

Connect your grease gun to the fitting to lubricate. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints with Grease Fitting



		1/2"-20	2 7/16"	1 1/2"	1/2"	20°	1 5/16"	5/8"	5,850	Carbon Steel	Right Hand, Left Hand	4444T3	00000

High-Load Ball Joint Rod Ends

These steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends. PTFE allows smooth rotation and eliminates the need for lubrication.

Oversized Shank—Rod ends with an oversized shank have a shank that is one size larger than the ID to handle greater stress.

Nylon/PTFE Insert—Rod ends with Nylon/PTFE insert have a durable, self-sealing insert that reduces wear.

Zinc-Plated Alloy Steel Insert—Rod ends with zinc-plated steel insert provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints







				Nylon/PTFE Insert

				1/2"-20	2 7/16"	1 1/2"	1/2"	12°	1 5/16"	5/8"	16,200	Chrome-Moly Steel	Right Hand, Left Hand	4483T6	000000




						Zinc-Plated Alloy Steel Insert and PTFE Liner

						1/2"-20	2 7/16"	1 1/2"	1/2"	12°	1 5/16"	5/8"	16,200	Zinc-Plated Alloy Steel	Right Hand, Left Hand	60745K26	00000


						Ball Joints with Oversized Shank







										Nylon/PTFE Insert

										1/2"-20	2 7/16"	1 1/2"	7/16"	12°	1 5/16"	9/16"	18,750	Chrome-Moly Steel	Right Hand, Left Hand	4475T14	00000

Corrosion-Resistant Ball Joint Rod Ends

Made of stainless steel, these rod ends provide excellent corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 7/16"	1 1/2"	1/2"	20°	1 5/16"	5/8"	4,700	303 Stainless Steel	Right Hand, Left Hand	59915K26	000000

Internally Threaded Thrust-Load-Rated Ball Joint Rod Ends

An innovative body design keeps the ball from being pushed out when supporting thrust loads. Rod ends are zinc-plated steel for moderate corrosion resistance and have a self-lubricating polyurethane insert.

	Shank							Static Load Cap., lb.
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Radial	Thrust	Temp. Range, ° F	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2"	1"	1/2"	30°	1 1/4"	5/8"	2,900	1,050	-40 to 175	Zinc-Plated Carbon Steel	Right Hand, Left Hand	8405K34	000000

Internally Threaded Corrosion-Resistant Ball Joint Rod Ends

Made of stainless steel, these rod ends provide excellent corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 1/8"	1 1/16"	1/2"	20°	1 5/16"	5/8"	4,700	303 Stainless Steel	Right Hand, Left Hand	59915K46	000000

Internally Threaded Lightweight Corrosion-Resistant Ball Joint Rod Ends

These anodized aluminum rod ends are lighter than stainless steel rod ends and have good corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 1/8"	1 1/16"	1/2"	12°	1 5/16"	5/8"	7,000	Anodized 7075 Aluminum	Right Hand, Left Hand	60685K36	000000

Internally Threaded Lubrication-Free Ball Joint Rod Ends


Ball Joint Rod End

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 1/8"	1 1/16"	1/2"	12°	1 5/16"	5/8"	6,450	Zinc-Plated Carbon Steel	Right Hand, Left Hand	2458K36	000000

Internally Threaded Ball Joint Rod Ends with Grease Fitting

Connect your grease gun to the fitting to lubricate. These rod ends don’t come lubricated, so you'll need to lubricate during installation and on an ongoing basis. Made of steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints with Grease Fitting



		1/2"-20	2 1/8"	1 1/16"	1/2"	20°	1 5/16"	5/8"	9,100	Carbon Steel	Right Hand, Left Hand	4444T23	00000

Internally Threaded Mil. Spec. Ball Joint Rod Ends

Made of cadmium-plated steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They provide moderate corrosion resistance. All have a PTFE liner that allows smooth ball rotation and eliminates the need for lubrication. Liner meets SAE AS81820.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Mil. Spec.	Specs. Met	Material	Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 1/4"	1 1/4"	1/2"	9°	1 5/16"	5/8"	19,500	MIL-B-81935	SAE AS81820 SAE AS81935	Cadmium-Plated Alloy Steel	Right Hand	2998K361	0000000

Lightweight Corrosion-Resistant Ball Joint Rod Ends

These anodized aluminum rod ends are lighter than stainless steel rod ends and have good corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 7/16"	1 1/2"	1/2"	12°	1 5/16"	5/8"	7,650	Anodized 7075 Aluminum	Right Hand, Left Hand	60685K13	000000

Mil. Spec. Ball Joint Rod Ends

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Mil. Spec.	Specs. Met	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 7/16"	1 7/16"	1/2"	9°	1 5/16"	5/8"	19,500	MIL-B-81935	SAE AS81820 SAE AS81935	Cadmium-Plated Alloy Steel	Right Hand, Left Hand	2998K16	0000000

Thrust-Load-Rated Ball Joint Rod Ends

	Shank							Static Load Cap., lb.
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Radial	Thrust	Temp. Range, ° F	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 7/16"	1 1/2"	1/2"	28°	1 1/4"	5/8"	2,900	1,050	-40 to 175	Zinc-Plated Carbon Steel	Right Hand, Left Hand	8405K35	000000

Internally Threaded Super-Swivel Ball Joint Rod Ends

With at least 55° of ball swivel, these rod ends accommodate greater misalignment than any other internally threaded rod end we offer. They generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer some corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication. All are zinc plated, so they resist corrosion for a short time before the finish is consumed and the steel is exposed.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 5/8"	1 3/8"	1/2"	65°	1 1/2"	1 1/4"	15,000	Zinc-Plated Alloy Steel	Right Hand, Left Hand	6960T44	000000

Oil-Embedded Ball Joint Rod Ends

An oil-embedded bronze insert slowly releases lubricant throughout the life of the rod end. These rod ends will require ongoing lubrication. Made of zinc-plated steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 7/16"	1 1/2"	1/2"	12°	1 5/16"	5/8"	6,700	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K124	000000

Super-Swivel Ball Joint Rod Ends

With at least 55° of ball swivel, these rod ends accommodate greater misalignment than any other externally threaded rod end we offer. They generally handle higher loads than stainless steel, aluminum, and nylon rod ends. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.

Zinc-Plated Alloy Steel—Zinc-plated steel rod ends provide more corrosion resistance than black-oxide steel.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 5/8"	1 5/8"	1/2"	65°	1 1/2"	1 1/4"	16,200	Zinc-Plated Alloy Steel	Right Hand, Left Hand	6960T25	000000

Internally Threaded Oil-Embedded Ball Joint Rod Ends

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 1/8"	1 1/16"	1/2"	12°	1 5/16"	5/8"	6,700	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K212	000000

Internally Threaded High-Load Ball Joint Rod Ends

These steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends. PTFE allows smooth rotation and eliminates the need for lubrication.

Nylon/PTFE Insert—Rod ends with Nylon/PTFE insert have a durable, self-sealing insert that reduces wear.

Zinc-Plated Alloy Steel Insert—Rod ends with zinc-plated steel insert provide moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints







				Nylon/PTFE Insert

				1/2"-20	2 1/8"	1 3/16"	1/2"	12°	1 5/16"	5/8"	15,300	Chrome-Moly Steel	Right Hand, Left Hand	4483T26	000000




						Zinc-Plated Alloy Steel Insert and PTFE Liner

						1/2"-20	2 1/8"	1 3/16"	1/2"	12°	1 5/16"	5/8"	15,300	Zinc-Plated Alloy Steel	Right Hand, Left Hand	60745K46	00000

Long-Life Ball Joint Rod Ends

Seals keep out dirt and an oil-embedded polyester foam insert slowly releases lubricant for a long life. You can remove the insert to add more oil if it starts to run dry. These rod ends have an eyelet and a ball that swivels to support angular misalignment. Made of zinc-plated steel, they have moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 7/16"	1 1/2"	1/2"	20°	1 5/16"	23/32"	7,200	Zinc-Plated Carbon Steel	Right Hand, Left Hand	5884N17	000000

Internally Threaded Chemical-Resistant Ball Joint Rod Ends

Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Temp. Range, ° F	Specs. Met	Material	Choose a Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 1/8"	1 1/16"	1/2"	22°	1 5/16"	5/8"	330	-20 to 175	ISO 12240-4	Nylon	Right Hand, Left Hand	1064K76	000000

Chemical-Resistant Ball Joint Rod Ends

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Temp. Range, ° F	Specs. Met	Material	Shank Thread Direction		Each
Ball Joints



		1/2"-20	2 7/16"	1 1/2"	1/2"	22°	1 5/16"	5/8"	100	-20 to 175	ISO 12240-4	Nylon	Right Hand	1064K561	000000