McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    5 Products

    Eyebolts—For Lifting

    Create a secure attachment point for hooks, shackles, and other lifting equipment. Also known as machinery eyebolts, these eyebolts are used to lift heavy machines and materials. They have a closed eye that won’t bend under strain.
    Warning: Never use to lift people or items over people. Capacities listed are for vertical lifting only.
    SteelAbout Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, Steel.
    Image of Product. Without Shoulder. Front orientation. Without Shoulder. Eyebolts—For Lifting, Steel.

    With

    Shoulder

    Without

    Shoulder

    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Without Shoulder—For vertical lifting only.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    2 1/2"-4
    		4 1/4"5"4"56,000ASTM A489Fully Threaded————013 3/16"3013T880000000
    2 1/2"-4
    		4 7/16"5"4"56,000ASTM A489Fully Threaded14 9/16"3014T1010000000————0
     
    Zinc-Plated Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, Zinc-Plated Steel.
    Image of Product. Without Sholder. Front orientation. Without Shoulder. Eyebolts—For Lifting, Zinc-Plated Steel.

    With

    Shoulder

    Without

    Sholder

    Zinc-plated steel eyebolts offer good corrosion resistance.
    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Without Shoulder—For vertical lifting only.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    2 1/2"-4
    		4 1/4"5"4"56,000ASTM A489Fully Threaded————013 3/16"3013T170000000
    2 1/2"-4
    		4 7/16"5"4"56,000ASTM A489Fully Threaded14 9/16"3014T1940000000————0
     

    Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Hoist Rings—For Lifting.

    180° Pivot

    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Hoist Rings—For Lifting.

    360° Swivel

    Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    Machined—Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
    Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.
    CE Marked—Hoist rings that are CE marked meet European safety standards.
    Each
    Thread
    Size
    Thread
    Lg.
    Inside
    Wd.
    Overall
    Ht.
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Mil. Spec.
    1-9
    10-Up
     
    Machined Black-Oxide Steel
    2 1/2"-4
    		4"6"20 7/8"50,000180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2093052T75000000000000000000
     
    back to top