Keep on hand all the parts needed to assemble custom hoist rings. Ideal for angular lifting, these hoist rings will withstand stresses that bend or break eyebolts. The base of these hoist rings will swivel 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. The shackle will pivot 180° front to back. All parts have a black oxide finish for mild corrosion resistance.

Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.

Warning: Never use to lift people or items over people.

For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.