McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    4 Products

    Eyebolts—For Lifting

    Create a secure attachment point for hooks, shackles, and other lifting equipment. Also known as machinery eyebolts, these eyebolts are used to lift heavy machines and materials. They have a closed eye that won’t bend under strain.
    Warning: Never use to lift people or items over people. Capacities listed are for vertical lifting only.
    SteelAbout Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, Steel.

    With

    Shoulder

    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Threading
    Overall
    Lg., mm
    Each
    Closed Eye
    M42 × 4.5 mm84847326,300Fully Threaded2633040T250000000
     
    Zinc-Plated Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, Zinc-Plated Steel.

    With

    Shoulder

    Zinc-plated steel eyebolts offer good corrosion resistance.
    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg., mm
    Each
    Closed Eye
    M42 × 4.5 mm63638013,800DIN 580Fully Threaded2103107T650000000
     

    Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Hoist Rings—For Lifting.

    180° Pivot

    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Hoist Rings—For Lifting.

    360° Swivel

    Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    Machined—Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
    Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.
    CE Marked—Hoist rings that are CE marked meet European safety standards.
    Each
    Thread Size
    Thread
    Lg., mm
    Inside
    Wd., mm
    Overall
    Ht., mm
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Mil. Spec.
    1-9
    10-Up
     
    Machined Black-Oxide Steel
    M42 × 4.5 mm7911439627,550180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-20929495T2300000000000000
     

    Swivel-Under-Load Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Swivel-Under-Load Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Swivel-Under-Load Hoist Rings—For Lifting, Swivel-Under-Load.
    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Swivel-Under-Load Hoist Rings—For Lifting, Swivel-Under-Load.

    180° Pivot

    360° Swivel

    The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended. For unbalanced or heavy loads, the base also swivels to compensate for pitch, roll, and sway. Their lifting ring pivots 180° front to back. Ideal for angular lifting, these hoist rings withstand stresses that bend or break eyebolts.
    Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    Thread Size
    Thread
    Lg., mm
    Inside
    Wd., mm
    Overall
    Ht., mm
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Each
     
    Forged Yellow Powder-Coated Steel
    M42 × 4.5 mm637033328,210180° Pivot and 360° SwivelASME B30.26CE Marked
    		4137N19000000000
     
    back to top