Filter by
Grommet Washer Type
For Material Thickness
Depth Under Flange
Flange Diameter
Export Control Classification Number (ECCN)
Military Specification
RoHS
DFARS Specialty Metals
Fabric Grommets
Standard Washer
 |
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Aluminum—Keep large tarps and other surfaces lightweight where you're installing lots of grommets.
Stainless Steel—Our most corrosion-resistant fabric grommets, they last the longest when exposed to sun, rain, dirt, and grease.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||
| 00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | NASM20230 | 50 | 9604K21 | 00000 | ||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM20230 | 50 | 9604K22 | 0000 | ||
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM20230 | 50 | 9604K23 | 0000 | ||
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | NASM20230 | 50 | 9604K24 | 00000 | ||
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM20230 | 50 | 9604K25 | 00000 | ||
| 4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | NASM20230 | 50 | 9604K26 | 00000 | ||
| 5 | 0.254" | 5/8" | 1.22" | 0.33" | Yes | NASM20230 | 25 | 9604K27 | 00000 | ||
| 6 | 0.149" | 13/16" | 1.75" | 0.232" | Yes | NASM20230 | 10 | 9604K28 | 00000 | ||
Nickel-Plated Brass | |||||||||||
| 00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | NASM16491 | 50 | 86625K31 | 0000 | ||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM16491 | 50 | 86625K32 | 00000 | ||
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM16491 | 50 | 86625K33 | 00000 | ||
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | NASM16491 | 50 | 86625K34 | 00000 | ||
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM16491 | 50 | 86625K35 | 00000 | ||
| 4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | NASM16491 | 25 | 86625K36 | 00000 | ||
| 5 | 0.254" | 5/8" | 1.22" | 0.33" | Yes | NASM16491 | 25 | 86625K37 | 00000 | ||
| 6 | 0.149" | 13/16" | 1.75" | 0.232" | Yes | NASM16491 | 10 | 86625K38 | 00000 | ||
Aluminum | |||||||||||
| 00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | — | 50 | 8264K2 | 0000 | ||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | — | 50 | 8264K11 | 0000 | ||
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | — | 50 | 8264K12 | 0000 | ||
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | — | 50 | 8264K13 | 0000 | ||
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | — | 50 | 8264K14 | 00000 | ||
| 4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | — | 50 | 8264K15 | 00000 | ||
Stainless Steel | |||||||||||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | — | 50 | 96015K31 | 00000 | ||
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | — | 25 | 96015K32 | 00000 | ||
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | — | 25 | 96015K33 | 00000 | ||
 |
Hammer-Driven Installation Punch |
 |
Hammer-Driven Cutting Punch |
For Grommet Trade Size | For Hole Dia. | Material | Each | |||
|---|---|---|---|---|---|---|
Hammer-Driven Installation Punch | ||||||
| 00 | 3/16" | — | 9612K25 | 000000 | ||
| 0 | 1/4" | — | 9612K26 | 00000 | ||
| 1 | 9/32" | — | 9612K27 | 00000 | ||
| 2 | 3/8" | — | 9612K28 | 00000 | ||
| 3 | 7/16" | — | 9612K29 | 00000 | ||
| 4 | 1/2" | — | 9612K31 | 00000 | ||
| 5 | 5/8" | — | 9612K32 | 00000 | ||
| 6 | 13/16" | — | 9612K33 | 00000 | ||
Hammer-Driven Cutting Punch | ||||||
| 00 | 3/16" | Steel | 9611K11 | 00000 | ||
| 0 | 1/4" | Steel | 9611K12 | 00000 | ||
| 1 | 9/32" | Steel | 9611K13 | 00000 | ||
| 2 | 3/8" | Steel | 9611K14 | 00000 | ||
| 3 | 7/16" | Steel | 9611K15 | 00000 | ||
| 4 | 1/2" | Steel | 9611K16 | 00000 | ||
| 5 | 5/8" | Steel | 9611K17 | 00000 | ||
| 6 | 3/4" | Steel | 9611K18 | 00000 | ||
 |
Manual Press |
Throat | |||||||
|---|---|---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |||
Manual Press | |||||||
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 95720A690 | 0000000 | ||
Tooth-Lock Washer
 |
Teeth grip the fabric for a stronger hold than standard washers.
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM16491 | 50 | 9605K21 | 00000 | ||
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM16491 | 50 | 9605K22 | 0000 | ||
| 2 | 0.141" | 3/8" | 0.815" | 0.215" | Yes | NASM16491 | 50 | 9605K23 | 00000 | ||
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM16491 | 50 | 9605K24 | 00000 | ||
| 4 | 0.295" | 1/2" | 1.05" | 0.374" | Yes | NASM16491 | 50 | 9605K25 | 00000 | ||
| 5 | 0.251" | 5/8" | 1.22" | 0.33" | Yes | NASM16491 | 25 | 9605K26 | 00000 | ||
Nickel-Plated Brass | |||||||||||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM16491 | 50 | 9604K31 | 0000 | ||
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM16491 | 50 | 9604K32 | 00000 | ||
| 2 | 0.141" | 3/8" | 0.815" | 0.215" | Yes | NASM16491 | 50 | 9604K33 | 00000 | ||
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM16491 | 25 | 9604K34 | 0000 | ||
|
Hammer-Driven Installation Punch |
|
Hammer-Driven Cutting Punch |
For Grommet Trade Size | For Hole Dia. | Material | Each | |||
|---|---|---|---|---|---|---|
Hammer-Driven Installation Punch | ||||||
| 0 | 1/4" | — | 9612K26 | 000000 | ||
| 1 | 9/32" | — | 9612K27 | 00000 | ||
| 2 | 3/8" | — | 9612K28 | 00000 | ||
| 3 | 7/16" | — | 9612K29 | 00000 | ||
| 4 | 1/2" | — | 9612K31 | 00000 | ||
| 5 | 5/8" | — | 9612K32 | 00000 | ||
Hammer-Driven Cutting Punch | ||||||
| 0 | 1/4" | Steel | 9611K12 | 00000 | ||
| 1 | 9/32" | Steel | 9611K13 | 00000 | ||
| 2 | 3/8" | Steel | 9611K14 | 00000 | ||
| 3 | 7/16" | Steel | 9611K15 | 00000 | ||
| 4 | 1/2" | Steel | 9611K16 | 00000 | ||
| 5 | 5/8" | Steel | 9611K17 | 00000 | ||
|
Manual Press |
Throat | |||||||
|---|---|---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |||
Manual Press | |||||||
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 95720A690 | 0000000 | ||
Reinforcing Fabric Grommets
Extended-Neck Washer
 |
An extended neck gives these washers a stronger hold than our other fabric grommets.
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||
| 00 | 0.062" | 3/16" | 0.425" | 0.135" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 8271K31 | 00000 | ||
| 0 | 0.102" | 1/4" | 0.545" | 0.175" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 8271K32 | 00000 | ||
| 1 | 0.112" | 9/32" | 0.687" | 0.185" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 8271K33 | 00000 | ||
| 2 | 0.139" | 3/8" | 0.815" | 0.215" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 8271K34 | 00000 | ||
| 3 | 0.218" | 7/16" | 0.97" | 0.295" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 8271K35 | 00000 | ||
| 4 | 0.296" | 1/2" | 1.05" | 0.374" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 25 | 8271K36 | 00000 | ||
Nickel-Plated Brass | |||||||||||
| 00 | 0.062" | 3/16" | 0.425" | 0.135" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9604K35 | 0000 | ||
| 0 | 0.102" | 1/4" | 0.545" | 0.175" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9604K36 | 0000 | ||
| 1 | 0.112" | 9/32" | 0.687" | 0.185" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9604K37 | 00000 | ||
| 2 | 0.139" | 3/8" | 0.815" | 0.215" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9604K38 | 00000 | ||
| 3 | 0.218" | 7/16" | 0.97" | 0.295" | Yes | AN230, MIL-G-16491, NASM20230 | 25 | 9604K39 | 00000 | ||
|
Hammer-Driven Installation Punch |
|
Hammer-Driven Cutting Punch |
For Grommet Trade Size | For Hole Dia. | Material | Each | |||
|---|---|---|---|---|---|---|
Hammer-Driven Installation Punch | ||||||
| 00 | 3/16" | — | 9612K25 | 000000 | ||
| 0 | 1/4" | — | 9612K26 | 00000 | ||
| 1 | 9/32" | — | 9612K27 | 00000 | ||
| 2 | 3/8" | — | 9612K28 | 00000 | ||
| 3 | 7/16" | — | 9612K29 | 00000 | ||
| 4 | 1/2" | — | 9612K31 | 00000 | ||
Hammer-Driven Cutting Punch | ||||||
| 00 | 3/16" | Steel | 9611K11 | 00000 | ||
| 0 | 1/4" | Steel | 9611K12 | 00000 | ||
| 1 | 9/32" | Steel | 9611K13 | 00000 | ||
| 2 | 3/8" | Steel | 9611K14 | 00000 | ||
| 3 | 7/16" | Steel | 9611K15 | 00000 | ||
| 4 | 1/2" | Steel | 9611K16 | 00000 | ||
|
Manual Press |
Throat | |||||||
|---|---|---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |||
Manual Press | |||||||
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 95720A690 | 0000000 | ||
Rolled Rim with Tooth-Lock Washer
 |
Teeth grip the fabric for an even stronger hold than other reinforcing fabric grommets. Use these washers for fabric under the highest strain, such as a tarp secured by bungee cords.
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Stainless Steel—Our most corrosion-resistant fabric grommets, they last the longest when exposed to sun, rain, dirt, and grease.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||
| 0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9606K41 | 000000 | ||
| 1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9606K42 | 00000 | ||
| 2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | AN230, MIL-G-16491, NASM20230 | 25 | 9606K43 | 00000 | ||
| 3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | AN230, MIL-G-16491, NASM20230 | 25 | 9606K44 | 00000 | ||
| 4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | AN230, MIL-G-16491, NASM20230 | 25 | 9606K45 | 00000 | ||
| 5 | 0.296" | 5/8" | 1.285" | 0.38" | Yes | AN230, MIL-G-16491, NASM20230 | 10 | 9606K46 | 0000 | ||
| 6 | 0.332" | 3/4" | 1.535" | 0.42" | Yes | AN230, MIL-G-16491, NASM20230 | 5 | 9606K47 | 0000 | ||
| 7 | 0.363" | 29/32" | 1.725" | 0.446" | Yes | AN230, MIL-G-16491, NASM20230 | 5 | 9606K48 | 00000 | ||
| 8 | 0.382" | 1 3/32" | 1.865" | 0.465" | Yes | AN230, MIL-G-16491, NASM20230 | 5 | 9606K49 | 00000 | ||
Nickel-Plated Brass | |||||||||||
| 0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 87995K51 | 00000 | ||
| 1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 25 | 87995K52 | 00000 | ||
| 2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 25 | 87995K53 | 00000 | ||
| 3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 25 | 87995K54 | 00000 | ||
| 4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 10 | 87995K55 | 0000 | ||
| 5 | 0.296" | 5/8" | 1.285" | 0.38" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 10 | 87995K56 | 00000 | ||
| 6 | 0.332" | 3/4" | 1.535" | 0.42" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 5 | 87995K57 | 0000 | ||
| 7 | 0.363" | 29/32" | 1.725" | 0.446" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 5 | 87995K58 | 00000 | ||
| 8 | 0.382" | 1 3/32" | 1.865" | 0.465" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 5 | 87995K59 | 00000 | ||
Stainless Steel | |||||||||||
| 0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | — | 10 | 96075K41 | 00000 | ||
| 1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | — | 10 | 96075K47 | 00000 | ||
| 2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | — | 5 | 96075K43 | 00000 | ||
| 3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | — | 5 | 96075K48 | 00000 | ||
| 4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | — | 5 | 96075K44 | 00000 | ||
|
Hammer-Driven Installation Punch |
|
Hammer-Driven Cutting Punch |
For Grommet Trade Size | For Hole Dia. | Material | Each | |||
|---|---|---|---|---|---|---|
Hammer-Driven Installation Punch | ||||||
| 0 | 9/32" | — | 9612K17 | 000000 | ||
| 1 | 13/32" | — | 9612K18 | 00000 | ||
| 2 | 7/16" | — | 9612K19 | 00000 | ||
| 3 | 15/32" | — | 9612K21 | 00000 | ||
| 4 | 9/16" | — | 9612K22 | 00000 | ||
| 5 | 5/8" | — | 9612K23 | 00000 | ||
| 6 | 3/4" | — | 9612K24 | 00000 | ||
| 7 | 29/32" | — | 9612K35 | 000000 | ||
| 8 | 1 3/32" | — | 9612K36 | 000000 | ||
Hammer-Driven Cutting Punch | ||||||
| 0 | 1/4" | Steel | 9611K12 | 00000 | ||
| 1 | 9/32" | Steel | 9611K13 | 00000 | ||
| 2 | 3/8" | Steel | 9611K14 | 00000 | ||
| 3 | 7/16" | Steel | 9611K15 | 00000 | ||
| 4 | 1/2" | Steel | 9611K16 | 00000 | ||
| 5 | 5/8" | Steel | 9611K17 | 00000 | ||
| 6 | 3/4" | Steel | 9611K18 | 00000 | ||
| 7 | 7/8" | Steel | 9611K19 | 00000 | ||
| 8 | 1" | Steel | 9611K21 | 00000 | ||
|
Manual Press |
Throat | |||||||
|---|---|---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |||
Manual Press | |||||||
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 95720A690 | 0000000 | ||
Self-Piercing Fabric Grommets
Standard Washer
 |
Grommets with trade size 0, 1, and 2 require a die set adapter for installation.
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Tooth-Lock Washer
 |
Teeth grip the fabric for a stronger hold than standard washers.
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Fabric Grommet Kits
Standard Washer
|  |
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Includes | No. of Grommets | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | ||||||||||||
| 0 | 0.1" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K31 | 000000 | ||
| 1 | 0.1" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K32 | 00000 | ||
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K13 | 00000 | ||
| 3 | 0.21" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 12 | 9610K34 | 00000 | ||
| 4 | 0.29" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 12 | 9610K35 | 00000 | ||
Tooth-Lock Washer
| |
Teeth grip the fabric for a stronger hold than standard washers.
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Includes | No. of Grommets | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | ||||||||||||
| 0 | 0.11" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 48 | 9610K16 | 000000 | ||
| 1 | 0.12" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 48 | 9610K17 | 00000 | ||
| 2 | 0.15" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K18 | 00000 | ||
| 3 | 0.23" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K19 | 00000 | ||
| 4 | 0.3" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K21 | 00000 | ||
Snap-In Fabric Grommets
 |
The only fabric grommets we sell that don’t need setting tools. Just snap the two parts into a pre-cut hole. The grommets add a protective plastic ring to the hole so rope and cable don’t tear your tarp, cover, or curtain. They grip securely enough for most jobs, but for a stronger hold in high-strain applications, choose our metal grommets instead.
Polycarbonate—Unlike polypropylene grommets, these grommets keep their strength and impact resistance at sub-freezing temperatures.
Polypropylene—These withstand a wider range of chemicals than polycarbonate grommets, but they can't handle the same extreme temperatures.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | Color | Temp., ° F | For Use Outdoors | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Polycarbonate | ||||||||||||
| 0 | 0.203" | 3/8" | 1 1/8" | 13/32" | Black | -150 to 250 | Yes | 10 | 96135K49 | 00000 | ||
Polypropylene | ||||||||||||
| 4 | 0.025" | 1/2" | 1 1/8" | 15/64" | Black | 30 to 180 | Yes | 25 | 96135K54 | 00000 | ||
| 4 | 0.025" | 1/2" | 1 1/8" | 15/64" | White | 30 to 180 | Yes | 50 | 96135K55 | 00000 | ||
Turn-Button Fastener Eyelets
