For full-face protection while welding, select one of these shields. All have a ratchet adjustment with an easy-turn knob.

Ideal for welders that face flying debris, these shields give you full face protection and snap onto a hard hat. When you’re ready to weld, flip down the welding lens. They’re compatible with any cap-style hard hat with slots.

Hold these lightweight face shields up to your face for quick inspection of welding activity.

These face masks meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These hats are made of abrasion-resistant aramid/viscose blend fabric, which keeps you warm without accumulating moisture.

Protect your head and neck from extreme heat. To fit your head, these hoods use an adjustable ratchet suspension. There's enough room inside to wear glasses, goggles, or a respirator.

Shield your face and neck from flame and electrical hazards while working in the cold.

Keep cool while staying shielded from flame and electrical hazards.

Get up close to your welds with these goggles. Their lightweight, compact design lets you weld in tight spots or awkward positions. A flame-resistant hood shields your ears, head, and neck from sparks and spatter better than traditional welding helmets. For different protection needs, wear them over prescription glasses, under a hard hat, or without the hood. Use the external controls to adjust power and shade settings without removing these goggles.

As you begin to weld, two sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these goggles use a true color lens to enhance clarity and color accuracy. They allow for a better look at your weld pool to increase weld quality and reduce eye strain.

Withstand flash fire for up to 8 seconds—the clothes in these kits can protect you for twice as long as most flame-resistant clothing. Made of rayon/aramid, the coveralls and mask absorb moisture to keep you cool and comfortable.

The coveralls have a 10 ft. Kevlar strap, so nearby teammates can pull you to safety without putting themselves at risk if there’s a fire. The reflective stripes keep you easy to see where there's low visibility. The zipper closure on the front is covered by a hook-and-loop flap so it doesn't scrape equipment or get hot. The legs have zippers on the sides as well, so you can fit them over bulky boots. Tighten the hook and loop straps on the bottom of the pants to keep flames out. The sleeves have cuffs with thumb holes to keep the sleeves in place and prevent flames from sneaking in. When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls.

These hoods meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Each hood has a hard hat with adjustable headgear and a face shield with an antifog coating.

Fans—Fans (sold separately) mount on your hood and pumps air inside using a fan motor. They operate on four AA batteries (not included).

Get a broader look at your weld—these helmets fit close to your face for a view six times wider than standard welding helmets. Designed with a smaller lens than other wide-view helmets, they’re lighter in weight and require less battery to darken. When you start to weld, five sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They give you a better look at the weld pool to increase weld quality and reduce eye strain.

Built-in solar cells charge the helmet’s battery during use. You can also plug in the battery to charge it while you’re not working.

Take full control of your shade level with these helmets—you can set the lens to adjust in half-shade increments. They have digital controls behind the lens where you can set the shade number, delay time, and sensitivity. Save up to nine settings to quickly switch between tasks. To switch to grind mode without removing your helmet, press the button above the lens.

As you weld, four sensors detect the light and automatically darken the lens. To improve weld quality and reduce eye strain, these helmets have a wide panoramic view and a true color lens. The lens enhances clarity and color accuracy to reduce the color distortion of your view.

Solar cells recharge the helmet’s battery while you work.

Protect your eyes the moment you start welding—four sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They allow for a better look at your weld pool to increase weld quality and reduce eye strain. To customize the helmet’s fit so you can focus on welding, these helmets have a ratchet adjustment with an easy-turn knob. Solar cells recharge the helmet’s battery while you work.

Filter out harmful air while you weld. These helmets have a built-in connection for the included powered air-purifying respirator (PAPR). The respirator supplies continuous filtered air to reduce breathing effort and minimize heat buildup inside these helmets. It also filters out at least 99.5% of harmful particles like smoke, aerosols, and dust. For comfortable all-day wear, they are lightweight and connect to a belt on your back for unrestricted movement. A rechargeable battery powers the respirator for up to 18 hours.

When you start to weld, five sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They allow for a better look at your weld pool to increase weld quality and reduce eye strain. A nose cutout lets these helmets sit closer to your face for a six-times larger viewing area than standard helmets for higher quality welds. Without the need for a larger lens to enhance peripheral vision, these helmets are lighter and have longer battery life. Solar cells recharge the helmet’s battery while you work.

No need for goggles or glasses under these helmets. They have two lenses to protect your eyes against welding laser light. A nose cutout lets these helmets sit closer to your face for a six-times larger viewing area than standard helmets for higher quality welds. Without the need for a larger lens to enhance peripheral vision, these helmets are lighter and have longer battery life. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They give you a better look at your weld pool to increase weld quality and reduce eye strain.