2.6A Fans | McMaster-Carr

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard blowers can handle. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, drying, ventilating, and exhausting. Blowers that weigh 280 lbs. or less can also be used for material conveying.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.

With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure

Image of Product. Front orientation. Blowers. High-Output Blowers, Round Outlet.

Blowers with a totally enclosed motor enclosure can be used in dirty, dusty, and wet environments.

	Blowers																		Replacement Wheels
								Overall							Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Outlet Dia.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Wt., lb.	Current	Temp. Range, ° F	Housing Material	Fasteners Included	Hole Dia.		Each		Each
120V AC/230V AC







				Single Phase—Hardwire

				120 ft³/min @ 5 in. H₂O 315 ft³/min @ 3 in. H₂O	65 dBA @ 15 ft.	3,450	1/3	3 15/16"	5"	9"	17 3/4"	15 5/16"	14 1/4"	58	5.2 amp/2.6 amp	-10 to 150	Steel	No	7/16"	0000000	000000000	0000000	0000000

Belt-Drive Corrosion-Resistant Duct Fans

A 304 stainless steel housing offers good corrosion resistance. All of these belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged. They install inline in ductwork for use as an exhaust, supply, or booster fan. The fans have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

							Overall						Mounting
	For Duct Dia.	No. of Speeds	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Dia.	Ht.	Dp.	Max. Temp., ° F	Housing Material	Blade Material	Fasteners Included	Hole Dia.		Each
230V AC, 460V AC, Three Phase—Hardwire



		12"	1	1,600 ft³/min @ 3/8 in. H₂O 1,800 ft³/min @ 1/8 in. H₂O	60 dBA @ 15 ft.	3,050	3/4	14 1/16"	25 5/8"	20"	200	304 Stainless Steel	Stainless Steel	No	7/16"	0000000	000000000

Light Duty Direct-Drive Wall-Mount Exhaust Fans with Louvers

These light duty fans are designed for use without duct. They come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area. All have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.

230/460V AC, Three Phase (Hardwire)—Totally Enclosed Motor Enclosure

Image of Product. Front orientation. Exhaust Fans. Light Duty Direct-Drive Wall-Mount Exhaust Fans with Louvers .

							For Opening		Overall
Blade Dia.	Airflow, ft³/min	Volume (Sound) @ Distance	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Ht.	Wd.	Dp.	Ambient Temp., ° F	Frame Material	Blade Material	Mounting Fasteners Included	Mounting Hole Dia.	Certification		Each
30"	5,745	Not Rated	Direct	850	1	1/2	30 1/2"	30 1/2"	33"	33"	15 1/4"	100	Steel	Aluminum	No	1/4"	UL Recognized Component	00000000	0000000

Hanging Box Fans

Easily hang these fans from your ceiling using the attached bracket and a mounting chain kit (sold separately). They're more powerful than our standard box fans. Made with a heavy duty 12-gauge welded wire mesh guard, these fans will stand up to tough environments. Plastic guard clips help reduce vibration between the housing and the guard, making these fans quieter. They require little maintenance thanks to their totally enclosed, high-efficiency motor and sealed ball bearings.

Fans with Totally Enclosed Motor Enclosure

Direct Drive—Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

	Blade								Overall							Mounting
	Dia.	Material	Airflow	Volume	Motor Speed, rpm	No. of Speeds	Power, hp	Current	Ht.	Wd.	Dp.	Drive Type	Housing Material	Guard Material	Bearing Type	Fasteners Included	Hole Dia.	Includes		Each
240/460V AC, Three Phase—Hardwire







				Non-Oscillating Fan

				24"	Steel	5,000 ft³/min	Not Rated	850	1	1/2	2.6 amp 1.3 amp	30 1/2"	30 1/2"	16 1/4"	Direct	Galvanized Steel	Galvanized Steel	Ball	No	3/8"	Plastic Guard Clips	0000000	0000000


				36"	Steel	9,800 ft³/min	Not Rated	850	1	1/2	2.6 amp 1.3 amp	40 5/8"	40 5/8"	14 1/8"	Direct	Galvanized Steel	Galvanized Steel	Ball	No	3/8"	Plastic Guard Clips	0000000	000000

Mounting Chain Kits

Chains
3	72"	Six Nuts for Eyebolts, Six Threaded Connecting Links, Three Eyebolts	0000000	000000

Blowers

These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have an open dripproof motor enclosure for relatively clean, dry, indoor locations.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

With Rectangular Outlet and Round Inlet—Open Dripproof (ODP) Motor Enclosure

Image of Product. Front orientation. Blowers. Blowers.

	Blowers																			Replacement Wheels
					Outlet				Overall							Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Ht.	Wd.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Wt., lb.	Current	Temp. Range, ° F	Housing Material	Fasteners Included	Hole Dia.		Each		Each
120V AC







				Single Phase—Hardwire

				305 ft³/min @ 3/4 in. H₂O 520 ft³/min @ 1/4 in. H₂O	48 dB @ 15 ft.	1,725	1/4	7 1/4"	4 1/4"	6"	6"	14"	10 1/4"	13 3/4"	28	2.6 amp/1.3 amp	-4 to 180	Steel	No	3/8"	00000000	000000000	00000000	0000000

Dust-Resistant Belt-Drive Wall-Mount Exhaust Fans

Better suited for dirty, dusty, and damp environments than standard direct-drive fans, these have a totally enclosed motor enclosure. Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged. Use these fans to draw stagnant and humid air out of a room or area.

230/460V AC, Three Phase (Hardwire)—Totally Enclosed Motor Enclosure


	Exhaust Fan Collars

Exhaust Fan Collars—Collars and louvers are sold separately. Use a collar to connect a wall-mount exhaust fan to a louver.

Exhaust Fans														Exhaust Fan Collars
							Overall
Blade Dia.	Airflow, ft³/min	Volume (Sound) @ Distance	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Dp.	Frame Material	Blade Material		Each		Each
36"	14,200	68 dB @ 5 ft.	Belt	800	1	1 1/2	42"	42"	19 1/8"	Steel	Steel	0000000	000000000	0000000	0000000

Exterior-Wall-Mount Exhaust Fans

Good when you don't have room to mount an exhaust fan inside your facility, these fans attach to openings in outside walls. Use them to draw stagnant and humid air out of a room or area.

Note: Airflow depends on the resistance created by louvers, filters, and ductwork in your system. This resistance, known as static pressure (SP), is measured in inches of water.

230/460V AC, Three Phase (Hardwire)—Totally Enclosed Motor Enclosure

Image of Product. Front orientation. Totally Enclosed Motor Enclosure. Exterior-Wall-Mount Exhaust Fans.

Fans with a totally enclosed motor enclosure can be used in dirty, dusty, and damp environments. They mount through the wall, so you'll need to cut a hole on the inside of the wall as well.

Direct Drive—Direct-drive fans have fewer moving parts than belt-drive fans, so they’re easier to maintain.

							For Opening			Overall
Blade Dia.	Airflow @ SP	Volume (Sound) @ Distance	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Dia.	Ht.	Wd.	Dia.	Dp.	Ambient Temp., ° F	Blade Material	Mounting Fasteners Included	Includes		Each
36"	6,700 ft³/min @ 0.2 in. H₂O 11,200 ft³/min @ 0 in. H₂O	Not Rated	Direct	825	3	1/2	36"	44"	44"	53"	57"	104	Steel	No	Louvers	0000000	000000000

Hazardous Location Exhaust Fans

These fans have a motor that is UL listed for hazardous environments. Use them to draw stagnant and humid air out of a room or area.

230/460V AC, Three Phase—Hardwire

Image of Product. Front orientation. Exhaust Fans. Hazardous Location Exhaust Fans .

Direct Drive—Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Add a collar (sold separately) to connect a wall-mount fan these fans to a louver.

Cannot Be Sold to California—Fans that cannot be sold to California do not meet energy efficiency requirements.

Exhaust Fans																	Exhaust Fan Collars
							Overall
Blade Dia.	Airflow, ft³/min	Volume (Sound) @ Distance	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Dp.	Housing Material	Blade Material	Certification	Hazardous Location Rating	Cannot Be Sold To		Each		Each
30"	11,000	77 dBA @ 5 ft.	Direct	1,125	1	1 1/2	36 1/8"	36 1/8"	29 1/4"	Steel	Aluminum	C-UL Listed, UL Listed	NEC Class I Divisions 1, 2 Group D; NEC Class II Divisions 1, 2 Groups F, G	California	0000000	000000000	0000000	0000000

Heaters for Equipment-Cooling Fans

Heat the airflow from equipment-cooling fans to warm equipment and reduce humidity. Use with square equipment-cooling fans. Install in place of a fan guard using the mounting holes. Components are UL recognized.

	For Overall Fan					Housing
	Ht.	Wd.	Dp.	Wattage, W	Current, amp	Material	Color	Mounting Hole Dia.	Mounting Fasteners Included		Each
240V AC, Single Phase—Wire Leads



		4.69" (119 mm)	4.69" (119 mm)	1.25" (31.75 mm)	600	2.6	Painted Aluminum	Black	3/16"	No	00000000	0000000

Pedestal Fan Motors

NEMA 48YZ

Image of Specification. Front orientation. Contains Annotated. 2 3/8" Shaft Length. Pedestal Fan Motors.

Image of Specification. Front orientation. Contains Annotated. 10 3/8" High. Pedestal Fan Motors.

Build your own fan or replace a fan motor. Mount one of these motors directly to a fan column. Four 8-32 threaded mounting studs extend 1" for mounting a fan guard.

Note: When selecting a fan blade, be sure the rpm and hp are compatible and the shaft diameter of the blade matches the shaft diameter of the motor.

			Shaft			Overall
	Motor Speed, rpm	Power, hp	Dia.	Lg.	Current, amp	Lg.	Wd.	Ht.	Direction of Operation	Service Factor	Mounting Fasteners Included	Mounting Hole Dia.	Features	Certification		Each
NEMA 48YZ







				120V AC, Single Phase—Hardwire

				1,625	1/4	1/2"	2 3/8"	2.6	10 11/16"	5 11/16"	10 3/8"	Clockwise, Counterclockwise	1.0	No	7/16"	Thermal Overload Protection	UL Recognized Component, CSA Certified	0000000	0000000

Ceiling-Mount Office Air Purifiers

Save floor space—purifiers mount in a T-bar style ceiling to remove contaminants.

Reusable Electrostatic Filter—Reusable electrostatic filter has an inherent electrostatic charge attracts particles. It can be washed.

Reusable Prefilter—Reusable prefilter can be washed.

Cannot Be Sold to California—Purifiers that cannot be sold to California are restricted due to energy efficiency requirements.

				For Ceiling Tile		Overall							White Housing		Black Housing
Airflow, ft³/min	Volume (Sound) @ Distance	Voltage, V AC	Current, amp	Lg.	Wd.	Lg.	Ht.	Wd.	Material	Includes	For Removing	Cannot Be Sold To		Each		Each
650	45 dB @ 15 ft.	120	2.6	24"	48"	23 3/4"	11"	47 3/4"	Steel	Disposable Odor-Removal After-Filter, Reusable Electrostatic Filter (Captures 97% of particles down to 0.01 microns), Reusable Prefilter	Dust, Particles	California	0000000	000000000	0000000	000000000

Replacements for Air Purifiers

Chains
No. of	Lg.	Includes		Each
3	72"	Six Nuts for Eyebolts, Six Threaded Connecting Links, Three Eyebolts	0000000	000000

		Each
Replacement HEPA/Odor-Removal Filters for 500 cfm Airflow	0000000	0000000
Replacement Odor-Removal After-Filters for 650 cfm Airflow	0000000	00000