4.72" Fans | McMaster-Carr

Running on 48V DC power or lower, these compact fans fit inside electronics and other small, heat-sensitive equipment to keep things cool. They're also known as muffin fans. Some meet American and Canadian safety standards.

Square

Plain Bearing—Fans with plain bearings are good for less demanding applications, such as cooling prototypes or parts that aren’t used often.

					Overall						Mounting
	Airflow	Temp. Range, ° F	Volume	Current	Ht.	Wd.	Dp.	Frame Material	Blade Material	Bearing Type	Fasteners Included	Hole Dia.	Certification		Each
12V DC—Wire Leads



		104.4 ft³/min	15 to 155	45 dBA	0.56 amp	4.72" (120 mm)	4.72" (120 mm)	0.98" (25 mm)	Plastic	Plastic	Plain	No	0.177" (4.5 mm)	C-UL Recognized Component, UL Recognized Component	8774N34	000000


		24V DC—Wire Leads



				108 ft³/min	15 to 155	45 dBA	0.24 amp	4.72" (120 mm)	4.72" (120 mm)	0.98" (25 mm)	Plastic	Plastic	Plain	No	0.17" (4.3 mm)	C-UL Recognized Component, UL Recognized Component	8774N18	00000

Hazardous Location Equipment-Cooling Fans

Safely cool electronics and equipment where explosive gases could be present due to equipment failure. ATEX certified, these fans meet European standards for hazardous locations. They’re also IP rated, so they seal out dust and are protected from water if briefly submersed. All have ball bearings that decrease noise for quiet operation. Their bearings reduce heat as they run as well, extending their life.

Square

					Overall						Mounting
	Airflow	Temp. Range, ° F	Volume	Current	Ht.	Wd.	Dp.	Frame Material	Blade Material	Hazardous Location Rating	Fasteners Included	Hole Dia.	Enclosure Rating	Certification		Each
100V AC to 240V AC, Single Phase, 50Hz/60Hz—Quick-Disconnect Terminal



		124 ft³/min	0 to 155	49 dBA	0.18 amp	4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	Plastic	Plastic	ATEX II 3 G Ex Ec IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	No	0.17" (4.3 mm)	IP68	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7311N15	000000


		100V AC to 240V AC, Single Phase, 50Hz/60Hz—Wire Leads



				124 ft³/min	0 to 155	49 dBA	0.18 amp	4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	Plastic	Plastic	ATEX II 3 G Ex Ec IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	No	0.17" (4.3 mm)	IP68	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7311N16	00000


				115V AC to 230V AC, Single Phase, 50Hz/60Hz—Quick-Disconnect Terminal



						106 ft³/min	0 to 155	43 dBA	0.08 amp	4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	Plastic	Plastic	ATEX II 3 G Ex nA IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	No	0.17" (4.3 mm)	IP68	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7311N23	00000

Hazardous Location Equipment-Cooling Fan Kits

Cool electronics and other sensitive equipment in potentially unsafe areas. These fans are non-sparking, so they’re safe for use around gas and explosive dust. They also withstand washdowns, occasional submersion in water, and wet weather. They’re not for use in mines. Ball bearings reduce the heat that’s generated to prolong fan lifespan.

Square

Image of Product. Front orientation. Fans. Hazardous Location Equipment-Cooling Fan Kits.

	Overall								Mounting
	Ht.	Wd.	Dp.	Airflow, ft³/min	Temp. Range, ° F	Volume (Sound), dBA	Current, amp	Frame Material	Fasteners Included	Hole Dia.	Hazardous Location Rating	Enclosure Rating	Certification		Each
304 Stainless Steel Guard







				120V AC, Single Phase, 50 Hz, 60 Hz—Two Blade Plug

				4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	106	0 to 155	43	0.08	Aluminum	No	0.17" (4.3 mm)	ATEX II 3 G Ex nA IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	IP68	C-UL Listed, UL Listed, UL Recognized Component	5935N11	0000000

DC Wet-Location Equipment-Cooling Fans

Operate these fans with a DC power source. Also known as muffin fans, they keep heat-sensitive equipment such as electronic components cool. All have ball bearings to lower the heat that is generated from the fans for a longer service life.

Square

Image of Product. Front orientation. Fans. DC Wet-Location Equipment-Cooling Fans.

					Overall						Mounting
	Airflow	Temp. Range, ° F	Volume	Current	Ht.	Wd.	Dp.	Frame Material	Blade Material	Bearing Type	Fasteners Included	Hole Dia.	Enclosure Rating	Certification		Each
12V DC—Wire Leads



		85.5 ft³/min	15 to 155	36 dBA	0.81 amp	4.72" (120 mm)	4.72" (120 mm)	0.98" (25 mm)	Plastic	Plastic	Ball	No	0.169" (4.3 mm)	IP57	C-UL Recognized Component, CE Marked, UL Recognized Component	9602K115	000000


		119 ft³/min	15 to 155	41 dBA	0.60 amp	4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	Plastic	Plastic	Ball	No	0.18" (4.57 mm)	IP58	C-UL Recognized Component, CE Marked, UL Recognized Component	9602K41	00000


		24V DC—Wire Leads



				110 ft³/min	15 to 155	44 dBA	0.24 amp	4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	Plastic	Plastic	Ball	No	0.18" (4.57 mm)	IP58	C-UL Recognized Component, CE Marked, UL Recognized Component	9602K42	00000

Submersible DC Equipment-Cooling Fans

Keep electronics cool in wet areas. These fans withstand weather, washdowns, and occasional time spent underwater. A ball bearing keeps them running smoothly and quietly, reducing friction to increase their lifespan.

Square

	Overall							Mounting
	Ht.	Wd.	Dp.	Airflow, ft³/min	Temp. Range, ° F	Volume (Sound), dBA	Current, amp	Fasteners Included	Hole Dia.	Enclosure Rating	Certification		Each
Plastic Frame with Plastic Blades







				12V DC, Wire Leads

				4.72" (120 mm)	4.72" (120 mm)	0.98" (25 mm)	80	15 to 155	41	0.65	No	0.17" (4.4 mm)	IP68	CE Marked, TUV Rheinland Certified, UL Recognized Component	7703N18	000000




						24V DC, Wire Leads

						4.72" (120 mm)	4.72" (120 mm)	0.98" (25 mm)	80	15 to 155	41	0.14	No	0.17" (4.4 mm)	IP68	CE Marked, TUV Rheinland Certified, UL Recognized Component	7703N19	00000




								48V DC, Wire Leads

								4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	271	15 to 155	68	1.00	No	0.18" (4.5 mm)	IP68	CE Marked, TUV Rheinland Certified, UL Recognized Component	7703N21	00000