Tapped Head Fasteners | McMaster-Carr

Filter by

System of Measurement

Diameter

Length

Shaft Type

Material

Thread Size

End Shape

Performance

Pin Type

Specifications Met

End Type

Minimum Hardness

Hardness

Double Shear Breaking Strength

Tolerance Rating

DFARS Specialty Metals

Compliant

Exempt

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Removal Method

Pull Out

RoHS

Compliant

Export Control Classification Number (ECCN)

REACH

Steel Grade

Thread Pitch

Passivation

For Use With

432 Products

Vented Pull-Out Dowel Pins

Insert and remove from blind holes with less effort than pins that aren't vented. The vent relieves trapped air, so pressure doesn't create resistance as you install the pin. Because they have a tapped end, you can thread in a screw and pull the pin out with a removal tool (sold separately). You can also pull using pliers, but there’s more risk of damaging the hole.

Flat Shaft

The flat side of these pins creates a vent that's less likely to be blocked than a spiral shaft, but doesn’t offer quite as strong of a hold.

High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.

Spring Steel—These pins won't deform from stress and vibration. They're stronger than stainless steel but not quite as strong as alloy steel. Pins perform best in dry environments since moisture will cause them to rust.

18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

Material Certificate—Pins include a report with a traceable lot number and a description of their chemical, physical, and mechanical properties.

	Lg.	Dia. Tolerance	Thread Size	Double Shear Breaking Strength	Min. Hardness	Specs. Met	Certificate Type		Each
High-Strength Alloy Steel







				1/4" Diameter

				3/4"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97360A110	00000


				1"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97360A120	0000
				1 1/4"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97360A130	0000
				1 1/2"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97360A140	0000
				1 3/4"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97360A150	0000
				2"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97360A160	0000
				2 1/2"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97360A170	0000




						5/16" Diameter

						3/4"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A180	0000


						1"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A190	0000
						1 1/4"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A200	0000
						1 1/2"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A210	0000
						2"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A222	0000
						2 1/2"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A240	0000




								3/8" Diameter

								1"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97360A250	0000


								1 1/4"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97360A260	0000
								1 1/2"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97360A270	0000
								2"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97360A290	0000
								2 1/4"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97360A300	0000
								2 1/2"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97360A310	0000
								3"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97360A320	0000




										1/2" Diameter

										1"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97360A330	0000


										1 1/4"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97360A340	0000
										1 1/2"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97360A350	0000
										1 3/4"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97360A360	0000
										2"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97360A370	0000
										2 1/2"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97360A390	0000
										3"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97360A400	0000
										3 1/2"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97360A410	0000




										5/8" Diameter

		1 1/2"								0.0001" to 0.0003"	1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A430	0000


		2"	0.0001" to 0.0003"							1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A440	0000
		2 1/4"	0.0001" to 0.0003"							1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A480	0000
		2 1/2"	0.0001" to 0.0003"							1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A490	0000
		3"	0.0001" to 0.0003"							1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A470	00000




										3/4" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A500	00000


				3"	0.0001" to 0.0003"					5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A510	00000
				4"	0.0001" to 0.0003"					5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A570	00000




										1" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	102,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A530	00000


										3"	0.0001" to 0.0003"	5/16"-18	102,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A550	00000
										4"	0.0001" to 0.0003"	5/16"-18	102,000 lbf	Rockwell C47	ASME B18.8.2	—	97360A580	00000




										16 mm Diameter

										32 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	98432A382	0000


										40 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	98432A386	0000
										50 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	98432A390	0000
										60 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	98432A394	0000
										70 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	98432A398	0000
										80 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	98432A402	0000


								Spring Steel







												6 mm Diameter

												16 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	98432A206	0000


												18 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	98432A210	0000
												20 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	98432A216	0000
24 mm												0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	98432A220	0000
28 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	98432A224	0000
30 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	98432A228	0000
36 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	98432A236	0000
40 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	98432A240	0000
50 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	98432A244	0000




												8 mm Diameter

												20 mm	0.006 mm to 0.015 mm	M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	98432A261	0000


		24 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	98432A265	0000
		28 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	98432A269	0000
		30 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	98432A274	0000
		36 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	98432A282	0000
		40 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	98432A286	0000
		50 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	98432A290	0000
		60 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	98432A294	0000
		70 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	98432A298	0000




				10 mm Diameter

				24 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	98432A303	0000


				28 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	98432A307	0000
				30 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	98432A311	0000
				36 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	98432A315	0000
				40 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	98432A319	0000
				50 mm	0.006 mm to 0.015 mm	M6 × 1 mm						Not Rated	Rockwell C52	DIN 7979D-m6	—	98432A323	0000
				60 mm	0.006 mm to 0.015 mm	M6 × 1 mm	Not Rated					Rockwell C52	DIN 7979D-m6	—	98432A327	0000
				70 mm	0.006 mm to 0.015 mm	M6 × 1 mm	Not Rated					Rockwell C52	DIN 7979D-m6	—	98432A332	0000




						12 mm Diameter

						24 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf	Rockwell C52	DIN 7979D-m6	—	98432A341	0000


						30 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf	Rockwell C52	DIN 7979D-m6	—	98432A345	0000
						36 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf	Rockwell C52	DIN 7979D-m6	—	98432A349	0000
						40 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf	Rockwell C52	DIN 7979D-m6	—	98432A353	0000
						45 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf	Rockwell C52	DIN 7979D-m6	—	98432A357	0000
						50 mm	0.007 mm to 0.018 mm	M6 × 1 mm				24,000 lbf	Rockwell C52	DIN 7979D-m6	—	98432A362	0000
						60 mm	0.007 mm to 0.018 mm	M6 × 1 mm	24,000 lbf			Rockwell C52	DIN 7979D-m6	—	98432A366	0000


						18-8 Stainless Steel







										1/4" Diameter

										3/4"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A110	0000


										1"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A120	0000
										1 1/4"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A130	0000
										1 1/2"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A140	0000
1 3/4"										0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A150	0000
2"	0.0001" to 0.0003"									8-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A160	0000
2 1/2"	0.0001" to 0.0003"									8-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A170	0000




										5/16" Diameter

										3/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A180	0000


										1"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A190	0000
										1 1/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A200	0000
										1 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A210	0000
										2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A222	00000
										2 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	Material Certificate	97365A240	00000




										3/8" Diameter

										1"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A250	00000


										1 1/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A260	00000
										1 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A270	00000
										2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A290	00000
										2 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A310	00000
										3"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A320	00000




										1/2" Diameter

										1"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A330	00000


										1 1/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A340	00000
										1 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A350	00000
										1 3/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A360	00000
										2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A370	00000
										2 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A390	00000
										3"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A400	00000




							5/8" Diameter

							1 1/2"				0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A430	00000


							2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A440	00000
							3"	0.0001" to 0.0003"	1/4"-20		Not Rated	Rockwell C47	ASME B18.8.2	—	97365A470	00000




									3/4" Diameter

									2"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A500	00000


									3"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A510	00000




									1" Diameter

									2"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A530	00000


									3"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	ASME B18.8.2	—	97365A620	00000




												4 mm Diameter

		16 mm										0.004 mm to 0.015 mm	M3 × 0.5 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A111	0000


		20 mm	0.004 mm to 0.015 mm									M3 × 0.5 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A112	00000




												5 mm Diameter

												10 mm	0.004 mm to 0.015 mm	M3 × 0.5 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A113	0000


												24 mm	0.004 mm to 0.015 mm	M3 × 0.5 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A114	00000




												6 mm Diameter

												16 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A115	00000


												24 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A117	0000
												30 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A119	00000
												36 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A121	00000
												40 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A122	00000




													8 mm Diameter

										16 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A124	00000


										20 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A125	00000
										24 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A126	00000
										30 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A127	00000
										40 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A128	00000
							50 mm			0.006 mm to 0.015 mm			M5 × 0.8 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A129	00000
							60 mm	0.006 mm to 0.015 mm		M5 × 0.8 mm			101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A131	00000
							100 mm	0.006 mm to 0.015 mm		M5 × 0.8 mm			101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A132	00000




										10 mm Diameter

										20 mm			0.006 mm to 0.015 mm	M6 × 1 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A133	00000


40 mm	0.006 mm to 0.015 mm									M6 × 1 mm			101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A137	00000
60 mm	0.006 mm to 0.015 mm									M6 × 1 mm			101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A139	00000
80 mm	0.006 mm to 0.015 mm									M6 × 1 mm			101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A141	00000




										12 mm Diameter

									24 mm	0.007 mm to 0.018 mm			M6 × 1 mm	101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A142	00000


									40 mm	0.007 mm to 0.018 mm	M6 × 1 mm		101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A145	00000
									50 mm	0.007 mm to 0.018 mm	M6 × 1 mm		101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A146	00000
									80 mm	0.007 mm to 0.018 mm	M6 × 1 mm		101,000 lbf	Rockwell C18	DIN 7979C-m6	—	98432A148	00000

Pin Removal Tools

		Each
Puller Handle	92330A300	000000
Tip for 3/16"-5/8" (6-12 mm) Diameter Pin	92330A411	00000
Tip for 3/4"-1-1/2" (13-20 mm) Diameter Pin	92330A511	00000
Extension (5 1/2" Overall Length)	92330A220	00000

Spiral Shaft

For a more secure hold under vibration than flat-shaft pins, the spiral makes 360° contact with the hole.

Material Certificate—Pins include a report with a traceable lot number and a description of their chemical, physical, and mechanical properties.

	Lg.	Dia. Tolerance	Thread Size	Double Shear Breaking Strength	Min. Hardness	Specs. Met	Certificate Type		Each
High-Strength Alloy Steel







				1/4" Diameter

				3/4"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97352A110	00000


				1"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97352A120	0000
				1 1/4"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97352A130	0000
				1 1/2"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97352A140	0000
				2"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97352A160	0000
				2 1/2"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97352A170	0000




						5/16" Diameter

						3/4"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A180	0000


						1"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A190	0000
						1 1/4"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A200	0000
						1 1/2"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A210	0000
						2"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A220	0000
						2 1/2"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A240	0000




								3/8" Diameter

								1"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97352A250	0000


								1 1/4"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97352A260	0000
								1 1/2"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97352A270	0000
								1 3/4"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97352A280	0000
								2"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97352A290	0000
								2 1/4"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97352A300	0000
								2 1/2"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97352A310	0000
								3"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97352A320	0000




										1/2" Diameter

										1"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97352A330	0000


										1 1/4"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97352A340	0000
										1 1/2"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97352A350	0000
										1 3/4"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97352A360	0000
										2"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97352A370	0000
										2 1/4"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97352A380	0000
										2 1/2"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97352A390	0000
										3"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97352A400	0000
										3 1/2"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97352A410	0000




										5/8" Diameter

		1 1/2"	0.0001" to 0.0003"							1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A430	0000


		2"	0.0001" to 0.0003"							1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A440	0000
		2 1/4"	0.0001" to 0.0003"							1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A480	0000
		2 1/2"	0.0001" to 0.0003"							1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A460	00000
		3"	0.0001" to 0.0003"							1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A470	00000




										3/4" Diameter

				2"						0.0001" to 0.0003"	5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A490	00000


				2 1/2"	0.0001" to 0.0003"					5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A500	00000
				3"	0.0001" to 0.0003"					5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A510	00000
				4"	0.0001" to 0.0003"					5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A570	00000




										1" Diameter

										2"	0.0001" to 0.0003"	3/8"-16	102,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A530	00000


						3"	0.0001" to 0.0003"			3/8"-16	102,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A550	00000
						4"	0.0001" to 0.0003"			3/8"-16	102,000 lbf	Rockwell C47	ASME B18.8.2	—	97352A580	00000


						18-8 Stainless Steel







												1/4" Diameter

												3/4"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A610	0000


								1"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A620	0000
								1 1/4"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A630	0000
								1 1/2"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A640	0000
								2"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A650	0000
								2 1/2"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A660	0000




												5/16" Diameter

												3/4"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A670	0000


												1"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A680	0000
1 1/4"												0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A690	0000
1 1/2"	0.0001" to 0.0003"											10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A710	0000
2"	0.0001" to 0.0003"											10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A720	0000




												3/8" Diameter

												1"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A730	0000


												1 1/4"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A740	0000
		1 1/2"										0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A750	0000
		1 3/4"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A760	0000
		2"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A770	0000
		2 1/4"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A780	0000
		2 1/2"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A790	0000
		3"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A810	00000




												1/2" Diameter

				1"								0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A820	0000


				1 1/4"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A830	0000
				1 1/2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A840	0000
				1 3/4"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A850	0000
				2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A860	0000
				2 1/4"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A870	0000
				2 1/2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A880	00000
				3"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A890	00000
				3 1/2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A910	00000




						5/8" Diameter

						1 1/2"	0.0001" to 0.0003"					1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A920	0000


						2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A930	00000
						2 1/4"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A940	00000
						2 1/2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A950	00000
						3"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A960	00000




										3/4" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	—	97352A970	00000


								2 1/2"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A971	00000
								3"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A972	00000
								4"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	—	97352A973	00000




										1" Diameter

										2"	0.0001" to 0.0003"	3/8"-16	Not Rated	Not Rated	—	—	97352A974	00000


3"	0.0001" to 0.0003"									3/8"-16	Not Rated	Not Rated	—	Material Certificate	97352A975	00000
4"	0.0001" to 0.0003"									3/8"-16	Not Rated	Not Rated	—	—	97352A976	00000

Pin Removal Tools

		Each
Puller Handle	92330A300	000000
Tip for 3/16"-5/8" (6-12 mm) Diameter Pin	92330A411	00000
Tip for 3/4"-1-1/2" (13-20 mm) Diameter Pin	92330A511	00000
Extension (5 1/2" Overall Length)	92330A220	00000

Pull-Out Dowel Pins

Remove pins even when you only have access to one end or they sit flush with the surface of your part. With one internally threaded end, they are easier to remove than most dowel pins. Thread a screw into the pin and then pull with the removal tool (sold separately). You can also pull the screw with pliers, but there’s more risk of damaging the hole.

Steel

High-Strength Black-Oxide Alloy Steel—With a matte black appearance, these pins combine a finished look with the superior strength and wear resistance of alloy steel. They offer minimal corrosion resistance, so they're best for dry environments.

									Each
	Lg.	Dia. Tolerance	Thread Size	Double Shear Breaking Strength	Min. Hardness	Specs. Met	Certificate Type		1-49	50-199	200-Up
High-Strength Alloy Steel







				1/4" Diameter

				1/2"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97175A309	00000	00000	00000


				3/4"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97175A311	0000	0000	0000
				1"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97175A315	0000	0000	0000
				1 1/4"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	Material Certificate	97175A316	0000	0000	0000
				1 1/2"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97175A318	0000	0000	0000
				1 3/4"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97175A319	0000	0000	0000
				2"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97175A321	0000	0000	0000
				2 1/2"	0.0001" to 0.0003"	8-32	6,400 lbf	Rockwell C47	ASME B18.8.2	—	97175A325	0000	0000	0000




						5/16" Diameter

						3/4"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A329	0000	0000	0000


						1"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A332	0000	0000	0000
						1 1/4"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A334	0000	0000	0000
						1 1/2"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A336	0000	0000	0000
						2"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A390	0000	0000	0000
						2 1/4"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A338	0000	0000	0000
						2 1/2"	0.0001" to 0.0003"	10-32	10,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A341	0000	0000	0000




								3/8" Diameter

								3/4"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97175A344	0000	0000	0000


								1"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97175A348	0000	0000	0000
								1 1/4"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97175A349	0000	0000	0000
								1 1/2"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97175A352	0000	0000	0000
								1 3/4"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97175A353	0000	0000	0000
								2"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97175A355	0000	0000	0000
								2 1/4"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97175A357	0000	0000	0000
								2 1/2"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97175A358	0000	0000	0000
								3"	0.0001" to 0.0003"	10-32	14,300 lbf	Rockwell C47	ASME B18.8.2	—	97175A364	0000	0000	0000




										7/16" Diameter

										1"	0.0001" to 0.0003"	1/4"-20	19,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A366	0000	0000	0000


										1 1/2"	0.0001" to 0.0003"	1/4"-20	19,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A369	0000	0000	0000
										2"	0.0001" to 0.0003"	1/4"-20	19,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A374	0000	0000	0000




										1/2" Diameter

										3/4"	0.0001" to 0.0003"	1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A376	0000	0000	0000


		1"	0.0001" to 0.0003"							1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A377	0000	0000	0000
		1 1/4"	0.0001" to 0.0003"							1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A378	0000	0000	0000
		1 1/2"	0.0001" to 0.0003"							1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A379	0000	0000	0000
		1 3/4"	0.0001" to 0.0003"							1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A381	0000	0000	0000
		2"	0.0001" to 0.0003"							1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A383	0000	0000	0000
		2 1/4"	0.0001" to 0.0003"							1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A385	0000	0000	0000
		2 1/2"	0.0001" to 0.0003"							1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A391	0000	0000	0000
		3"	0.0001" to 0.0003"							1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A395	0000	0000	0000
		3 1/2"	0.0001" to 0.0003"							1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A397	0000	0000	0000
		4"	0.0001" to 0.0003"							1/4"-20	25,500 lbf	Rockwell C47	ASME B18.8.2	—	97175A399	0000	0000	0000




				5/8" Diameter

				1 1/4"	0.0001" to 0.0003"					1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A410	0000	0000	0000


				1 1/2"	0.0001" to 0.0003"					1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A411	0000	0000	0000
				2"	0.0001" to 0.0003"					1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A413	0000	0000	0000
				2 1/4"	0.0001" to 0.0003"					1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A414	0000	0000	0000
				2 1/2"	0.0001" to 0.0003"					1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A415	0000	0000	0000
				3"	0.0001" to 0.0003"					1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A417	0000	0000	0000
				4"	0.0001" to 0.0003"					1/4"-20	39,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A421	0000	0000	0000




										3/4" Diameter

						1 1/2"	0.0001" to 0.0003"			5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A426	0000	0000	0000


						2"	0.0001" to 0.0003"			5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A431	0000	0000	0000
						2 1/2"	0.0001" to 0.0003"			5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A435	0000	0000	0000
						3"	0.0001" to 0.0003"			5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A439	0000	0000	0000
						4"	0.0001" to 0.0003"			5/16"-18	57,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A440	0000	0000	0000




										1" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	102,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A443	0000	0000	0000


								2 1/2"		0.0001" to 0.0003"	5/16"-18	102,000 lbf	Rockwell C47	ASME B18.8.2	Material Certificate	97175A446	0000	0000	0000
								3"	0.0001" to 0.0003"	5/16"-18	102,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A449	00000	0000	0000
								4"	0.0001" to 0.0003"	5/16"-18	102,000 lbf	Rockwell C47	ASME B18.8.2	—	97175A453	00000	0000	0000




										16 mm Diameter

										32 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	97355A563	0000	0000	0000


36 mm	0.007 mm to 0.018 mm									M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	97355A567	0000	0000	0000
40 mm	0.007 mm to 0.018 mm									M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	97355A571	0000	0000	0000
50 mm	0.007 mm to 0.018 mm									M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	97355A579	0000	0000	0000
60 mm	0.007 mm to 0.018 mm									M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	97355A587	0000	0000	0000
70 mm	0.007 mm to 0.018 mm									M8 × 1.25 mm	33,500 lbf	Rockwell C52	DIN 7979D-m6	—	97355A591	0000	0000	0000




										20 mm Diameter

										50 mm	0.008 mm to 0.021 mm	M10 × 1.5 mm	51,500 lbf	Rockwell C52	DIN 7979D-m6	—	97355A605	0000	0000	0000


										60 mm	0.008 mm to 0.021 mm	M10 × 1.5 mm	51,500 lbf	Rockwell C52	DIN 7979D-m6	—	97355A609	0000	0000	0000
										80 mm	0.008 mm to 0.021 mm	M10 × 1.5 mm	51,500 lbf	Rockwell C52	DIN 7979D-m6	—	97355A613	0000	0000	0000


		High-Strength Black-Oxide Alloy Steel







												1/4" Diameter

												1/2"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A711	0000	0000	0000


												3/4"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A712	0000	0000	0000
												1"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A713	0000	0000	0000
				1 1/4"								0.0001" to 0.0003"	8-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A714	0000	0000	0000
				1 1/2"	0.0001" to 0.0003"							8-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A715	0000	0000	0000
				2"	0.0001" to 0.0003"							8-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A716	0000	0000	0000




												5/16" Diameter

												3/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A717	0000	0000	0000


												1"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A718	0000	0000	0000
						1 1/4"						0.0001" to 0.0003"	10-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A719	0000	0000	0000
						1 1/2"	0.0001" to 0.0003"					10-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A721	0000	0000	0000
						2"	0.0001" to 0.0003"					10-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A722	0000	0000	0000




												3/8" Diameter

												3/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A723	0000	0000	0000


								1"				0.0001" to 0.0003"	10-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A724	0000	0000	0000
								1 1/4"	0.0001" to 0.0003"			10-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A725	0000	0000	0000
								1 1/2"	0.0001" to 0.0003"			10-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A726	0000	0000	0000
								2"	0.0001" to 0.0003"			10-32	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A727	0000	0000	0000




												1/2" Diameter

												1"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A728	0000	0000	0000


1 1/2"												0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A729	0000	0000	0000
2"	0.0001" to 0.0003"											1/4"-20	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A731	0000	0000	0000
2 1/2"	0.0001" to 0.0003"											1/4"-20	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A732	0000	0000	0000




												5/8" Diameter

												2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C60	ASME B18.8.2	—	97175A733	0000	0000	0000


		Spring Steel







												6 mm Diameter

												16 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A292	0000	0000	0000


												18 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A296	0000	0000	0000
												20 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A300	0000	0000	0000
												24 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A302	0000	0000	0000
												28 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A303	0000	0000	0000
												30 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A306	0000	0000	0000
												32 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A310	0000	0000	0000
												36 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A314	0000	0000	0000
				40 mm								0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A318	0000	0000	0000
				50 mm	0.004 mm to 0.012 mm							M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A326	0000	0000	0000
				60 mm	0.004 mm to 0.012 mm							M4 × 0.7 mm	6,600 lbf	Rockwell C52	DIN 7979D-m6	—	97355A334	0000	0000	0000




												8 mm Diameter

												20 mm	0.006 mm to 0.015 mm	M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A401	0000	0000	0000


												24 mm	0.006 mm to 0.015 mm	M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A405	0000	0000	0000
						28 mm						0.006 mm to 0.015 mm	M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A414	0000	0000	0000
						30 mm	0.006 mm to 0.015 mm					M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A418	0000	0000	0000
						32 mm	0.006 mm to 0.015 mm					M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A404	0000	0000	0000
						36 mm	0.006 mm to 0.015 mm					M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A422	0000	0000	0000
						40 mm	0.006 mm to 0.015 mm					M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A406	0000	0000	0000
						50 mm	0.006 mm to 0.015 mm					M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A426	0000	0000	0000
						60 mm	0.006 mm to 0.015 mm					M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A430	0000	0000	0000
						70 mm	0.006 mm to 0.015 mm					M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A434	0000	0000	0000
						80 mm	0.006 mm to 0.015 mm					M5 × 0.8 mm	10,400 lbf	Rockwell C52	DIN 7979D-m6	—	97355A439	0000	0000	0000




								10 mm Diameter

								24 mm	0.006 mm to 0.015 mm			M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	97355A492	0000	0000	0000


								28 mm	0.006 mm to 0.015 mm			M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	97355A496	0000	0000	0000
								30 mm	0.006 mm to 0.015 mm			M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	97355A500	0000	0000	0000
								32 mm	0.006 mm to 0.015 mm			M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	97355A504	0000	0000	0000
								36 mm	0.006 mm to 0.015 mm			M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	97355A505	0000	0000	0000
								40 mm	0.006 mm to 0.015 mm			M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	97355A506	0000	0000	0000
								50 mm	0.006 mm to 0.015 mm			M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	—	97355A507	0000	0000	0000
60 mm								0.006 mm to 0.015 mm	M6 × 1 mm			Not Rated	Rockwell C52	DIN 7979D-m6	—	97355A515	0000	0000	0000
70 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated			Rockwell C52	DIN 7979D-m6	—	97355A518	0000	0000	0000
80 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated			Rockwell C52	DIN 7979D-m6	—	97355A520	0000	0000	0000




								12 mm Diameter

		24 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf			Rockwell C52	DIN 7979D-m6	—	97355A531	0000	0000	0000


		30 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf			Rockwell C52	DIN 7979D-m6	—	97355A535	0000	0000	0000
		36 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf			Rockwell C52	DIN 7979D-m6	—	97355A539	0000	0000	0000
		45 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf			Rockwell C52	DIN 7979D-m6	—	97355A543	0000	0000	0000
		50 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf	Rockwell C52		DIN 7979D-m6	—	97355A547	0000	0000	0000
		60 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000 lbf	Rockwell C52	DIN 7979D-m6	—	97355A551	0000	0000	0000

Pin Removal Tools

		Each
Puller Handle	92330A300	000000
Tip for 3/16"-5/8" (6-12 mm) Diameter Pin	92330A411	00000
Tip for 3/4"-1-1/2" (13-20 mm) Diameter Pin	92330A511	00000
Extension (5 1/2" Overall Length)	92330A220	00000

Corrosion-Resistant Stainless Steel About Corrosion-Resistant Stainless Steel

									Each
	Lg.	Dia. Tolerance	Thread Size	Double Shear Breaking Strength	Min. Hardness	Specs. Met	Certificate Type		1-49	50-199	200-Up
18-8 Stainless Steel







				3/16" Diameter

				1/2"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A734	00000	00000	00000


				9/16"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97175A735	0000	0000	0000
				5/8"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A736	0000	0000	0000
				3/4"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97175A737	0000	0000	0000
				7/8"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A738	0000	0000	0000
				1"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A739	0000	0000	0000
				1 1/8"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A741	0000	0000	0000
				1 1/4"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A742	0000	0000	0000
				1 3/8"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A743	0000	0000	0000
				1 1/2"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A744	0000	0000	0000
				1 3/4"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A745	0000	0000	0000


				2"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A746	0000	0000	0000
				2 1/2"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A747	0000	0000	0000




						1/4" Diameter

						1/2"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A809	0000	0000	0000


						5/8"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97175A748	0000	0000	0000
						3/4"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A811	0000	0000	0000
						7/8"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A749	0000	0000	0000
						1"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A815	0000	0000	0000
						1 1/8"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A751	0000	0000	0000
						1 1/4"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A816	0000	0000	0000
						1 3/8"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A752	0000	0000	0000
						1 1/2"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97175A818	0000	0000	0000
						1 3/4"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97175A819	0000	0000	0000
						2"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A821	0000	0000	0000


						2 1/4"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A753	0000	0000	0000
						2 1/2"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A825	0000	0000	0000
						3"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A754	0000	0000	0000




								5/16" Diameter

								1/2"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A755	0000	0000	0000


								3/4"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A829	0000	0000	0000
								7/8"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A756	0000	0000	0000
								1"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A832	0000	0000	0000
								1 1/4"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A834	0000	0000	0000
								1 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A836	0000	0000	0000
2"								0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A890	0000	0000	0000
2 1/2"	0.0001" to 0.0003"							10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A841	0000	0000	0000




		3/8" Diameter

		1/2"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A757	0000	0000	0000


		5/8"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A758	0000	0000	0000
		3/4"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A759	0000	0000	0000
		7/8"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A761	0000	0000	0000
		1"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A848	0000	0000	0000
		1 1/4"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A849	0000	0000	0000
		1 1/2"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A852	0000	0000	0000
		1 3/4"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A762	0000	0000	0000
		2"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A855	0000	0000	0000
		2 1/4"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A857	0000	0000	0000
		2 1/2"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A858	0000	0000	0000


		3"	0.0001" to 0.0003"					10-32	Not Rated	Not Rated	ASME B18.8.2	—	97175A864	0000	0000	0000




								7/16" Diameter

				1"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A866	0000	0000	0000


				1 1/2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A869	0000	0000	0000
				2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A874	0000	0000	0000




								1/2" Diameter

								3/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A876	0000	0000	0000


								1"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97175A877	0000	0000	0000
								1 1/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A878	0000	0000	0000
								1 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97175A879	0000	0000	0000
								1 3/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A881	0000	0000	0000
								2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A883	0000	0000	0000
								2 1/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A885	0000	0000	0000
								2 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A891	0000	0000	0000
								3"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A895	0000	0000	0000
								3 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A897	00000	00000	00000
						4"		0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A899	00000	00000	0000




								5/8" Diameter

								1 1/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A910	0000	0000	0000


								1 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A911	00000	0000	0000
								2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A913	00000	00000	0000
								2 1/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A914	00000	00000	0000
								2 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A915	00000	00000	0000
								3"	0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A917	00000	00000	00000
4"								0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97175A921	00000	00000	0000




								3/4" Diameter

								1 1/2"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	—	97175A926	0000	0000	0000


								2"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	—	97175A931	00000	00000	00000
								2 1/2"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	—	97175A935	00000	00000	00000
								3"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	—	97175A939	00000	00000	00000
								4"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	—	97175A940	00000	00000	00000




										1" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97175A942	00000	00000	00000


		2 1/2"	0.0001" to 0.0003"							5/16"-18	Not Rated	Not Rated	—	—	97175A946	00000	00000	00000
		3"	0.0001" to 0.0003"							5/16"-18	Not Rated	Not Rated	ASME B18.8.2	—	97175A949	00000	00000	00000
		4"	0.0001" to 0.0003"							5/16"-18	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97175A953	00000	00000	00000

Pin Removal Tools

		Each
Puller Handle	92330A300	000000
Tip for 3/16"-5/8" (6-12 mm) Diameter Pin	92330A411	00000
Tip for 3/4"-1-1/2" (13-20 mm) Diameter Pin	92330A511	00000
Extension (5 1/2" Overall Length)	92330A220	00000

Tapped Taper Pins

These internally threaded pins sit flush in an assembly. For easy removal from a blind hole, thread a screw into the pin and pull out. Often used for positioning components and securing assemblies, they taper at a uniform rate to fit in tapered holes. Use a tapered drill bit that matches the pin number for a snug fit. They have slightly rounded edges to aid insertion.

12L14 Carbon Steel—12L14 Carbon steel pins have good strength.

ASME B18.8.2—Pins meet ASME B18.8.2 specifications for material and dimensions.

	Thread Lg.	Thread Size	Specs. Met		Each
12L14 Carbon Steel







	5 Taper Pin—0.289" Large End Diameter

	1 1/4"	0.263"	1:48	3/8"	10-24	ASME B18.8.2	90351A101	00000


	2"	0.248"	1:48	3/8"	10-24	ASME B18.8.2	90351A102	0000




			6 Taper Pin—0.341" Large End Diameter

			2"	0.3"	1:48	7/16"	1/4"-20	ASME B18.8.2	90351A103	0000


			3"	0.279"	1:48	7/16"	1/4"-20	ASME B18.8.2	90351A104	00000




					7 Taper Pin—0.409" Large End Diameter

					3"	0.347"	1:48	1/2"	5/16"-18	ASME B18.8.2	90351A105	00000


					4"	0.326"	1:48	1/2"	5/16"-18	ASME B18.8.2	90351A106	00000




							8 Taper Pin—0.492" Large End Diameter

							3"	0.43"	1:48	1/2"	5/16"-18	ASME B18.8.2	90351A107	00000


							4"	0.409"	1:48	1/2"	5/16"-18	ASME B18.8.2	90351A108	00000




									9 Taper Pin—0.591" Large End Diameter

									5"	0.487"	1:48	5/8"	3/8"-16	ASME B18.8.2	90351A109	00000


									6"	0.466"	1:48	5/8"	3/8"-16	ASME B18.8.2	90351A111	00000




											10 Taper Pin—0.706" Large End Diameter

											4"	0.623"	1:48	3/4"	1/2"-13	ASME B18.8.2	90351A112	00000


											6"	0.581"	1:48	3/4"	1/2"-13	ASME B18.8.2	90351A113	00000