We will reply to your message within an hour.
More
Used to mount panels, signs, and dispensers, this foam tape absorbs shock and provides high strength holding power on rigid surfaces.
The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.
Use this tape outdoors for sealing and mounting signs and security control panels.
Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.
Often used to install carpet, padding, and linoleum.
Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.
Use this transparent tape for laminating, splicing, and mounting, even on hard-to-bond plastics. It has adhesive on both sides.
The clear side of this polyester tape is coated with silicone adhesive for mounting to silicone rubber, while the white side is coated with acrylic adhesive for a strong bond to metal and plastic.
These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.
This flexible, multipurpose tape offers water resistance with excellent adhesion.
Also known as gaffer's tape, this conformable cloth tape leaves no residue when removed. The matte finish won't reflect light. Choose a color that will blend in for temporary repairs.
For use in clean rooms, this tape won't leave residue behind.
The strong backing on this kraft paper tape resists moisture and weathering, yet it can still be torn by hand.
Twice as strong as our standard reinforced strapping tape for extra-heavy loads. Fiberglass fibers run along the length.
Use this tape for light duty bundling and strapping. Fiberglass fibers run along the length.
Wet the adhesive on this gummed kraft paper tape to secure corrugated, printed, and overstuffed cartons.
When seams and joints begin to show wear, this super-strong reinforcing tape provides support. It is flexible yet nonelastic and stays in place even in damp conditions.
Wrap this tape around carbon fiber and other composite parts, then heat to 150° F. Tape shrinks to squeeze out air bubbles and apply pressure so parts cure without voids.
This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.
Make invisible repairs with this clear tape. The weatherproof adhesive won't turn yellow outdoors.
Patch and seal roofs, window frames, gutters, and vents with this conformable tape.
Use this flame-retardant tape for sealing in galleys and other harsh, wet environments.
Use this crepe paper tape for sharp paint lines.
The adhesive on this crepe paper tape won't damage painted and finished surfaces.
This crepe paper tape keeps its hold, even on 300° F surfaces.
Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.
Cover holes, fastener heads, and small areas with these shapes.
Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.
At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.
This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.
Outline and draw attention to safety zones and hazards with this tape.
Made to the highest standards for cleanliness, this tape meets clean room requirements. It releases minimal contaminants, leaves no residue behind, and comes sealed in a plastic bag. Use it to mark hazardous items or areas.
Mark aisles and stairs with a high-contrast reflective strip.
Reduce rattles and squeaks between parts with this abrasionresistant flocked tape. The acrylic adhesive sticks even on hard-to-bond plastics.
Quiet squeaky floor joists and reduce vibration with this foam tape.
Insulate wire and cable splices, wrap wire harnesses, and repair cable jacketing with this stretchy tape.
Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.
No need for adhesive—this tape fuses to itself for a permanent seal and stretches to fit virtually any form. Also known as cold shrink tape.
Use this rubber tape to splice cable in high-voltage applications.
This traditional black cotton electrician's tape provides an abrasion-resistant shield for wrapping low-voltage splices.
Also known as Scotchfil, this noncorrosive putty tape wraps, stretches, and molds around irregular shapes for insulation buildup.
In the event of a fire, this rubber tape expands to protect cables from flames and heat.
A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.
Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.
A strong, thick layer of Teflon® PTFE makes this tape tougher than standard Low-Friction Tape Made with Teflon® PTFE.
Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.
Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.
Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.
Screw these dispensers to a workbench, cabinet, or table.
For occasional taping jobs, choose these plastic dispensers.
The metal construction stands up to heavy use.
This plastic dispenser has a brake that allows you to control tension for tighter box closure.
A combination of moisture and chemical resistance makes this hook and loop a good choice for most applications.
A high-tack rubber adhesive on these hook and loop strips sets quickly in moist conditions.
Both the hook and the loop meet MIL-A-A-55126.
Each connector on this hook has two gripping heads for super-strong holding power.
Stretch this elastic loop over objects for a secure hold.
Mushroom-shaped heads interlock for a secure hold when two pieces are pressed together.
Fasteners are cut into convenient rectangles and discs.
Cut to wrap around any size bundle.
Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.
Use these glue rolls with 3M dispensing guns.
Create custom-length ties from a roll with hook on one side and loop on the other.
Able to fit small bundles, these thin ties are more flexible than other ties.
These cable ties are easy to yank apart or cinch shut, even when wearing gloves—a textured tab on the end gives you a good grip.
Easily open and cinch closed parallel bundles.
Secure a bundle and then use the grommet to temporarily hang it from a hook or peg.
Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.