Cartridges are also known as stems.

Replace the valve control module in touch-free faucets.

When only replacing your washer won’t stop leaks in your faucet, these tools help remove dirt and scratches that prevent a good seal.

Fill sinks and buckets quickly. These faucets have a flow rate of 7.5 gpm or higher—more than three times that of other faucets.

The tall, narrow spout on these gooseneck faucets provides more space for filling bottles, beakers, flasks, and other laboratory accessories.

Prevent wasted water with these faucets that shut off when the handle is released.

Attach these aerators to your faucet spout to reduce water use and noise while producing a smoother, more powerful spray.

Use these pullers to remove most faucet handles.

Often used for industrial parts washing and food service applications, these flexible sprayers shoot a concentrated jet of water to blast away dirt and grease.

Press these valves with your foot or knee for water; release them to stop the flow.

These faucets turn on and off with a quarter turn of the handle.

These faucets drain when closed to prevent freezing.

Extend the life of your garden hose. These fittings swivel 360° to prevent the hose from kinking.

With valves, pipe, and a head all included, these utility showers come ready for wall-mount installation.

Hook up faucets and other appliances to a water supply with these flexible hoses.

Often used in tight spaces, these valves shut off water with a quarter turn of the handle.

These valves have a removable key handle to prevent unauthorized use.

Provide a connection for hose cocks, needle valves, and nozzles by attaching these flanges and turrets to your supply pipe.

Primarily used on drums, these faucets can also be used on tanks, carboys, and other containers.

These faucets meet NSF/ANSI standards.

The gauge provides an instant visual check of liquid levels in your drum without interfering with the use of the faucet.

Attach garden hose to the valve outlet. Use with water. These valves gradually open and close to adjust and regulate flow.

Use these valves for boiler maintenance and other low-pressure plumbing applications. They're for use with water. All gradually open and close to adjust and regulate flow.

These valves press down on the outside of tubing to adjust flow without contacting the process media.

For extra gripping power and a strong seal, these valves have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. The 316 stainless steel body and seal, the PTFE seat and packing, and the Monel needle can withstand aggressive and corrosive solutions in chemical-processing applications. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.

Use these valves with NPT threaded pipe. They have a fluoroelastomer seal and a plastic body to withstand aggressive and corrosive solutions in chemical-processing applications. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.

In addition to fluoroelastomer seats that resist a wide range of chemicals, these valves have no metal parts to corrode, so they’re often used for chemical-processing applications in corrosive conditions. All bolt to flanges to adjust and regulate flow in flanged pipelines.

Plastic provides a lightweight and economical alternative to metal. All valves have barbs that grip onto tubing for a secure hold. They’re for use with water, oil, air, and inert gas.

Install these low-profile valves in tight spots. Use with water, oil, air, and inert gas.

For chemical-processing applications in confined areas, these valves have an EPDM seal and a PVC or CPVC body to withstand aggressive and corrosive solutions and a low-profile handle to fit in tight spots.

To test water quality without interrupting flow, drain a small amount of liquid through the sampling outlet.

Also known as stop cocks, install these valves on your tank for easy draining.

Insert into a pipe or fitting and turn—the wrench grips the walls for easy installation and removal without marring the outside of the pipe.

Grip pipe and conduit as well as tighten and loosen fittings.

Made of materials that are Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

Also known as monkey and auto wrenches, these grip large fasteners and other flat objects.

The nonmarring strap grips plastic pipe, tubing, hand wheels, filters, and objects with highly polished surfaces.

Pivot the head to clear obstructions and turn filters and other cylindrical objects in hard-to-reach areas.

Attach these fittings to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Made of nylon, these fittings are lighter in weight than metal garden hose fittings. Attach them to garden hose for a variety of water supply applications.

These two-piece couplings thread together to create an access point within a garden hose line. The threaded design allows for a more secure hold at the point of connection than quick-disconnect and cam-and-groove garden hose couplings.

Curved, serrated jaws firmly grip hose and tube for installation and removal without damage.

Able to withstand up to 400 psi, these have the highest pressure rating of all our float-operated drain valves.

With a discharge capacity of more than four gallons per minute, these drain valves can handle large compressed air systems.

Keep an eye on condensate collecting in your compressed air line. These drain valves have a clear bowl, so you can see inside to inspect the contents.

These withstand at least double the pressure of our other timer-operated drain valves.