About Durometer Hardness Scales
More
About Leveling Mounts
More
About Vibration-Damping Mounts
More
Cushion-Rest Leveling Mounts with Threaded Stud
![](/prerenderstable/mvPRE/contents/gfx/imagecache/251/2515t12p1-g02b-digitall@halfx_637026842063770010.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/230/23015tl1-levelingmountwiththreadedstud-i165-1610558351-p9@halfx_637461339025126523.png?ver=imagenotfound)
These mounts have a cushion on top that provides padding between your furniture and the mount. Protect surfaces from scratches and wear. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Style | Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Temperature Range, °F | Pkg. Qty. | Pkg. | |
304 Stainless Steel with Plastic Cushion and Zinc-Plated Steel Stud | |||||||||
---|---|---|---|---|---|---|---|---|---|
1 | 8-32 | 3/8" | 50 | 1 1/8" | 13/16" | -20° to 170° | 4 | 0000000 | 00000 |
Thread-On Feet
![](/prerenderstable/mvPRE/contents/gfx/imagecache/535/53535a12p1-m08a-digitall@halfx_637163271684807064.png?ver=imagenotfound)
Great as nonslip feet, thread these rubber suction cups to the bottom of your lightweight equipment.
For technical drawings and 3-D models, click on a part number.
General Purpose Vibration-Damping Sandwich Mounts with Stud and Insert
![](/prerenderstable/mvPRE/contents/gfx/imagecache/969/96905k37p1-g02b-digital@halfx_636860912132190445.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i15/i155-9376kl4-1611929939-p9@halfx_637475051416693342.png?ver=imagenotfound)
Use these rubber sandwich mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
Neoprene rubber has good resistance to weather and acids and moderate resistance to oils.
Natural rubber has superior resistance to tears and abrasion as well as good flexibility in cold temperatures.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Lg. | Thread Dp. | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Neoprene Rubber with Zinc-Plated Steel Stud and Steel Insert | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8-32 | 7 | 0.05" | 0.75 | 0.04" | 3/8" | 1/2" | 1/2" | 1/8" | Durometer 50A | Medium | 10° to 180° | 00000000 | 00000 |
8-32 | 18 | 0.06" | 6 | 0.1" | 9/16" | 1/2" | 3/8" | 3/16" | Durometer 50A | Medium | -20° to 180° | 000000000 | 0000 |
8-32 | 20 | 0.05" | 3 | 0.06" | 5/8" | 1/2" | 1/2" | 3/16" | Durometer 50A | Medium | 10° to 180° | 00000000 | 0000 |
Natural Rubber with Zinc-Plated Steel Stud and Steel Insert | |||||||||||||
8-32 | 4.5 | 0.04" | 3.3 | 0.12" | 7/16" | 1/2" | 3/8" | 3/16" | Durometer 30A | Soft | -20° to 180° | 00000000 | 0000 |
8-32 | 7 | 0.05" | 0.75 | 0.04" | 3/8" | 1/2" | 1/2" | 1/8" | Durometer 50A | Medium | -10° to 150° | 0000000 | 0000 |
8-32 | 9.5 | 0.06" | 4.5 | 0.12" | 9/16" | 1/2" | 1/4" | 3/16" | Durometer 30A | Soft | -20° to 180° | 00000000 | 0000 |
8-32 | 14 | 0.06" | 5.4 | 0.12" | 9/16" | 1/2" | 1/4" | 3/16" | Durometer 40A | Soft | -20° to 180° | 00000000 | 0000 |
8-32 | 18 | 0.06" | 6 | 0.12" | 9/16" | 1/2" | 3/8" | 3/16" | Durometer 50A | Medium | -20° to 180° | 00000000 | 0000 |
8-32 | 20 | 0.05" | 3 | 0.06" | 5/8" | 1/2" | 1/2" | 3/16" | Durometer 50A | Medium | -10° to 150° | 0000000 | 0000 |
General Purpose Vibration-Damping Sandwich Mounts with Studs
![](/prerenderstable/mvPRE/contents/gfx/imagecache/937/9376k22c1-g02b-digital-master1561388393-p9@halfx_636969674279868133.png?ver=imagenotfound)
Use these rubber sandwich mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
Neoprene rubber has good resistance to weather and acids and moderate resistance to oils.
Natural rubber has superior resistance to tears and abrasion as well as good flexibility in cold temperatures.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Lg. | Hardness | Hardness Rating | Temp. Range, °F | Each | ||
Neoprene Rubber with Zinc-Plated Steel Stud | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 8-32 | 7 | 0.05" | 0.75 | 0.04" | 3/8" | 1/2" | 1/2" | Durometer 50A | Medium | 10° to 180° | 0000000 | 00000 |
1 | 8-32 | 20 | 0.05" | 3 | 0.06" | 5/8" | 1/2" | 1/2" | Durometer 50A | Medium | 10° to 180° | 0000000 | 0000 |
Natural Rubber with Zinc-Plated Steel Stud | |||||||||||||
1 | 8-32 | 7 | 0.05" | 0.75 | 0.04" | 3/8" | 1/2" | 1/2" | Durometer 50A | Medium | -10° to 150° | 0000000 | 0000 |
1 | 8-32 | 20 | 0.05" | 3 | 0.06" | 5/8" | 1/2" | 1/2" | Durometer 50A | Medium | -10° to 150° | 0000000 | 0000 |
General Purpose Vibration-Damping Sandwich Mounts with Inserts
![](/prerenderstable/mvPRE/contents/gfx/imagecache/937/9378k11p1-g02b-digital@halfx_636937015454944618.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-thread-depth-1609972990-p9@halfx_637455481924908752.png?ver=imagenotfound)
Use these rubber sandwich mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
Neoprene rubber has good resistance to weather and acids and moderate resistance to oils.
Natural rubber has superior resistance to tears and abrasion as well as good flexibility in cold temperatures.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Dp. | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Neoprene Rubber with Steel Insert | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
8-32 | 7 | 0.05" | 0.75 | 0.04" | 3/8" | 1/2" | 1/8" | Durometer 50A | Medium | 10° to 180° | 00000000 | 00000 |
8-32 | 25 | 0.03" | 5 | 0.03" | 5/8" | 1/2" | 3/16" | Durometer 50A | Medium | 10° to 180° | 00000000 | 0000 |
Natural Rubber with Steel Insert | ||||||||||||
8-32 | 7 | 0.05" | 0.75 | 0.04" | 3/8" | 1/2" | 1/8" | Durometer 50A | Medium | -10° to 150° | 0000000 | 0000 |
8-32 | 25 | 0.03" | 5 | 0.03" | 5/8" | 1/2" | 3/16" | Durometer 50A | Medium | -10° to 150° | 0000000 | 0000 |
Corrosion-Resistant Vibration-Damping Sandwich Mounts with Inserts
![](/prerenderstable/mvPRE/contents/gfx/imagecache/582/5823k37p1-g02b-digital@halfx_636860906330672862.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-thread-depth-1609972990-p9@halfx_637455481924908752.png?ver=imagenotfound)
Made of stainless steel and rubber, these mounts resist corrosion from water and most chemicals. Natural rubber is resistant to tears and abrasion and has good flexibility in cold temperatures. Use mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Dp. | Hardness | Hardness Rating | Temperature Range, °F | Each | |
Natural Rubber with 304 Stainless Steel Insert | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
8-32 | 20 | 0.05" | 3 | 0.06" | 5/8" | 1/2" | 3/16" | Durometer 50A | Medium | -10° to 150° | 0000000 | 00000 |
Corrosion-Resistant Vibration-Damping Sandwich Mounts with Stud and Insert
![](/prerenderstable/mvPRE/contents/gfx/imagecache/582/5823k762_1d83c2f8-a310-49e4-b3c2-8b5c4567b9e2@halfx_1689091462.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i15/i155-9376kl4-1611929939-p9@halfx_637475051416693342.png?ver=imagenotfound)
Made of stainless steel and rubber, these mounts resist corrosion from water and most chemicals. Natural rubber is resistant to tears and abrasion and has good flexibility in cold temperatures. Use mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Lg. | Thread Dp. | Hardness | Temperature Range, °F | Each | |
Natural Rubber with 304 Stainless Steel Stud and Insert | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
8-32 | 20 | 0.05" | 3 | 0.06" | 5/8" | 1/2" | 1/2" | 3/16" | Durometer 50A | -10° to 150° | 0000000 | 000000 |
Corrosion-Resistant Vibration-Damping Sandwich Mounts with Studs
![](/prerenderstable/mvPRE/contents/gfx/imagecache/582/5823k45_d440ce06-e214-44c9-b0f9-9d5574ac6cae1705415838@halfx_1705415844.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i14/i146-diameter-1610128649-p9@halfx_637457038814755822.png?ver=imagenotfound)
Made of stainless steel and rubber, these mounts resist corrosion from water and most chemicals. Natural rubber is resistant to tears and abrasion and has good flexibility in cold temperatures. Use mounts to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps. They're for use in compression and shear load applications.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Lg. | Hardness | Hardness Rating | Temp. Range, °F | Each | |
Natural Rubber with 304 Stainless Steel Stud | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
8-32 | 20 | 0.05" | 3 | 0.06" | 5/8" | 1/2" | 1/2" | Durometer 50A | Medium | -10° to 150° | 000000 | 00000 |
Chemical-Resistant Vibration-Damping Sandwich Mounts with Stud and Insert
![](/prerenderstable/mvPRE/contents/gfx/imagecache/969/96905k37p1-g02b-digital@halfx_636860912132190445.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-thread-depth-1610570545-p9@halfx_637461457480044056.png?ver=imagenotfound)
These mounts are made of polyurethane rubber, which withstands exposure to solvents, acids, and oils. Use them to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps.
7A durometer (extra soft) mounts are more flexible than medium-hard mounts. Use them in compression load applications.
58A durometer (medium hard) mounts are tough, yet flexible. Use them in compression and shear load applications.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Lg. | Thread Dp. | Hardness | Temperature Range, °F | Each | |
Polyurethane Rubber with Zinc-Plated Steel Stud and Steel Insert | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
8-32 | 4 | 0.02" | 2 | 0.16" | 3/8" | 1/2" | 3/8" | 3/16" | Durometer 58A | 55° to 105° | 00000000 | 00000 |
8-32 | 6 | 0.15" | Not Rated | Not Rated | 3/4" | 1/2" | 1/2" | 1/4" | Durometer 7A | -20° to 160° | 00000000 | 00000 |
8-32 | 12 | 0.1" | Not Rated | Not Rated | 3/4" | 1/2" | 1/2" | 1/4" | Durometer 20A | -20° to 160° | 00000000 | 00000 |
Chemical-Resistant Vibration-Damping Sandwich Mounts with Studs
![](/prerenderstable/mvPRE/contents/gfx/imagecache/969/96905k33p1-g02b-digital@halfx_636860942729861127.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i14/i146-diameter-1610128649-p9@halfx_637457038814755822.png?ver=imagenotfound)
These mounts are made of polyurethane rubber, which withstands exposure to solvents, acids, and oils. Use them to minimize vibration between surfaces inside machinery and equipment, such as in circuit boards, small fans, compressors, and pumps.
7A durometer (extra soft) mounts are more flexible than medium-hard mounts. Use them in compression load applications.
58A durometer (medium hard) mounts are tough, yet flexible. Use them in compression and shear load applications.
For technical drawings and 3-D models, click on a part number.
Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | Dia. | Ht. | Thread Lg. | Hardness | Hardness Rating | Temp. Range, °F | Each | |
Polyurethane Rubber with Zinc-Plated Steel Stud | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
8-32 | 8 | 0.03" | 3 | 0.24" | 3/8" | 1/2" | 3/8" | Durometer 58A | Medium | 55° to 105° | 00000000 | 00000 |
8-32 | 8 | 0.15" | Not Rated | Not Rated | 3/4" | 1/2" | 1/2" | Durometer 7A | Extra Soft | -20° to 160° | 00000000 | 00000 |
Threaded-Stud Bumpers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/954/9541k2p1-j06-digitall@halfx_637109575768852997.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/954/9541k1p1-j06-digitall@halfx_637109573939865259.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/954/9541kl3-j06-digital-master1564430878-p9@halfx_637000096864870037.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/954/9541k1l3-j06-digital-master1564430704-p9@halfx_637000095352187122.png?ver=imagenotfound)
Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.
Bumpers with a hard and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
SBR bumpers have good abrasion resistance. They're also nonmarking.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | OD | Ht. | Counterbore Dia. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Pkg. Qty. | Pkg. | |
Style 1 | |||||||||||||
SBR Rubber | |||||||||||||
8-32 | 1/4" | 5/8" | 5/16" | __ | 0° to 220° | No | Hard | Durometer 70A | Yes | Black | 10 | 0000000 | 00000 |
8-32 | 3/8" | 3/4" | 7/16" | __ | -20° to 180° | No | Hard | Durometer 70A | Yes | Black | 25 | 000000 | 00000 |
Style 2 | |||||||||||||
SBR Rubber | |||||||||||||
8-32 | 5/16" | 3/4" | 7/16" | 5/16" | -20° to 200° | No | Hard | Durometer 70A | Yes | Black | 10 | 0000000 | 0000 |
Load-Rated Threaded-Stud Bumpers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/931/93115k111p1-j06-digitall@halfx_637110425169455331.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/257/2572kl4-j06-digital-master1561644965-p9@halfx_636972323860844201.png?ver=imagenotfound)
Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.
Bumpers with a soft and extra-soft rating offer cushioning. The softer the bumper, the more it cushions.
Bumpers with a medium hardness rating offer a balance of cushioning and impact resistance.
Rubber bumpers are abrasion resistant. Those with a soft rating can be used outdoors.
Polyurethane bumpers have better abrasion resistance than rubber bumpers. They won't become brittle and crack when exposed to ozone.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | OD | Ht. | Max. Load, lbs. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Nonmarking | Color | Stud Material | Each | |
Style 1 | ||||||||||||
Rubber with Steel Base Plate | ||||||||||||
8-32 | 3/8" | 13/32" | 1/2" | 1 | -10° to 150° | Yes | Soft | Yes | Black | Steel | 00000000 | 00000 |
Polyurethane Rubber with Steel Base Plate | ||||||||||||
8-32 | 3/8" | 13/32" | 1/2" | 8 | 60° to 160° | No | Medium | No | Black | Steel | 00000000 | 0000 |
8-32 | 1/2" | 3/4" | 1/2" | 3 | -20° to 160° | No | Extra Soft | No | Black | Steel | 0000000 | 0000 |
8-32 | 1/2" | 3/4" | 1/2" | 12 | -20° to 160° | No | Soft | No | Black | Steel | 0000000 | 0000 |
Load-Rated Threaded Bumpers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/931/93115k371p1-j06-digitall@halfx_637110554387241181.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/257/2572k8p1-j06-digitall@halfx_637100255977730691.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/thr/thread-depth--77abfa8abac1674517438-p9@halfx_638101132441223166.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/thr/thread-depth-1674742686-p9@halfx_638103178906168154.png?ver=imagenotfound)
Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.
Bumpers with a soft and extra-soft rating offer cushioning. The softer the bumper, the more it cushions. Bumpers with a medium and medium-soft rating offer a balance of cushioning and impact resistance.
Rubber bumpers are abrasion resistant. Those with a soft rating can be used outdoors.
Polyurethane bumpers have better abrasion resistance than rubber bumpers. They won't become brittle and crack when exposed to ozone.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Dp. | OD | Ht. | Max. Load, lbs. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Style 1 | ||||||||||||
Rubber with Steel Base Plate | ||||||||||||
8-32 | 3/16" | 13/32" | 1/2" | 0.6 | -10° to 150° | Yes | Soft | Durometer 19A | Yes | Black | 00000000 | 00000 |
Polyurethane Rubber with Steel Base Plate | ||||||||||||
8-32 | 3/16" | 13/32" | 1/2" | 4 | 60° to 100° | No | Medium | Durometer 48A | No | Black | 00000000 | 0000 |
Style 3 | ||||||||||||
Polyurethane Rubber with Steel Base Plate | ||||||||||||
8-32 | 1/4" | 3/4" | 1/2" | 3 | -20° to 160° | No | Extra Soft | Durometer 50 OO | No | Black | 000000 | 0000 |
8-32 | 1/4" | 3/4" | 1/2" | 6 | -20° to 160° | No | Soft | Durometer 70 OO | No | Black | 000000 | 0000 |
Threaded Locating and Support Buttons
![](/prerenderstable/mvPRE/contents/gfx/imagecache/847/8479a9-1585329304-p9@halfx_637209081611673387.png?ver=imagenotfound)
Use these buttons to support and position workpieces and fixtures from the bottom or side. Their hex shape lets you screw them into a threaded hole with a wrench or socket. Threading makes these buttons easier to replace than press-fit, so they are a good choice for high-wear applications. They’re also known as rest buttons.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||
---|---|---|---|---|---|---|
Lg. | Wd. | Size | Lg. | Lg. Tolerance | Each | |
Steel | ||||||
3/16" | 1/4" | 8-32 | 3/16" | 0" to 0.015" | 0000000 | 00000 |
Create-Your-Own Spring-Loaded Guide Pins
![](/prerenderstable/mvPRE/contents/gfx/imagecache/307/3076n15-@halfx_636910010488541979.png?ver=imagenotfound)
Thread in a screw, handle, or other part to create the right size and shape guide pin for your application. As the workpiece pushes against the pin head in one direction, the internal spring pushes back to hold it in place for clamping. Press into a drilled hole using the installation tool (sold separately).
For technical drawings and 3-D models, click on a part number.
Machinable Dual-Clamping Fixture Clamps
![](/prerenderstable/mvPRE/contents/gfx/imagecache/312/3122n12-@halfx_636922969585442636.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/312/3122n12--5218262c5471559246505-p9@halfx_636948253082416073.png?ver=imagenotfound)
Machine these fixture clamps to match the contours of your workpieces for a stronger grip. Place the clamp between the two workpieces in a fixture and tighten the screw to extend the sides of the clamp, creating a secure hold against both workpieces. Minimal contact with the workpiece leaves more of its surface accessible for machining. Each clamp comes with a locking plate to keep the clamp rigid while machining it to fit your application.
For technical drawings and 3-D models, click on a part number.
Thread | Drive | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Max. Clamping Force, lbs. | Max. Machinable Wd. | Size | Lg. | Size | Style | Material | Screw Material | Wedge Material | Each | |
5/8" | 1 1/8" | 1/2" | 500 | 0.18" | 8-32 | 5/8" | 9/64" | Hex | Aluminum | Steel | Steel | 0000000 | 000000 |
Dual-Clamping Fixture Clamps
![](/prerenderstable/mvPRE/contents/gfx/imagecache/869/8693a11p1-a06-digital@halfx_636880020469444788.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/869/8693a12c1-a06-digital-master1552422875-p9@halfx_636598421590740518.png?ver=imagenotfound)
Set one of these clamps between two workpieces in a fixture and tighten the screw to push the clamp's sides out for a secure hold. The minimal contact leaves more of the workpieces free for machining.
For technical drawings and 3-D models, click on a part number.
Thread | Drive | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Max. Clamping Force, lbs. | Size | Lg. | Size | Style | Material | Screw Material | Wedge Material | Each | |
5/8" | 1/2" | 37/64" | 500 | 8-32 | 5/8" | 9/64" | Hex | Aluminum | Steel | Steel | 0000000 | 000000 |
Thread | Drive | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Max. Clamping Force, lbs. | Size | Lg. | Size | Style | Material | Screw Material | Wedge Material | Pkg. Qty. | Pkg. | |
5/8" | 1/2" | 37/64" | 500 | 8-32 | 5/8" | 9/64" | Hex | Aluminum | Steel | Steel | 8 | 0000000 | 000000 |
Fixture Clamps
![](/prerenderstable/mvPRE/contents/gfx/imagecache/848/84865a12p3-a06-digital@halfx_636880021742046918.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/848/84865a12c1-a06-digital-master1552423070-p9@halfx_636598421472814325.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/848/84865a15-eps1594067427-p9@halfx_637296462333554826.png?ver=imagenotfound)
Hold a workpiece securely from the side with minimal contact, leaving more of the workpiece free for machining. Thread the clamp into a tapped hole and give the center screw a half turn for quick clamping.
For technical drawings and 3-D models, click on a part number.
Low-Profile Fixture Clamps
![](/prerenderstable/mvPRE/contents/gfx/imagecache/217/2172a13p1-a06-digital@halfx_636880020126360699.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/217/2172a13c1-a06-digital-master1552422875-p9@halfx_636598409338804136.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/217/2172a18c1-a06-digital-master1552423070-p9@halfx_636598984613350000.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/217/2172a18p2-a06-digital@halfx_637208174601713147.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/217/2172a17p1-a06-digital@halfx_636880020298872834.png?ver=imagenotfound)
Install these clamps into a slot in your fixture to grip at the bottom of workpiece edges, giving the cutting tool maximum access to your workpiece. Thread the clamp into a tapped hole and give the center screw a half turn for quick clamping.
Blunt edge is less likely to mar your workpiece. Knife edge bites into your workpiece for faster and more aggressive machining.
Clamps with brass heads are nonmarring when used with steel and aluminum workpieces.
For technical drawings and 3-D models, click on a part number.
Head | Thread | Drive | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Max. Movement | Max. Clamping Force, lbs. | Min. Workpiece Contact | For Slot Dp. | Size | Lg. | Size | Style | Head Material | Screw Material | Each | |
Blunt Edge | ||||||||||||||
1/2" | 1/2" | 9/32" | 0.016" | 400 | 0.1" | 0.187" | 8-32 | 11/32" | 3/32" | Hex | Brass | Steel | 0000000 | 000000 |
1/2" | 1/2" | 9/32" | 0.016" | 1,500 | 0.1" | 0.187" | 8-32 | 3/8" | 9/64" | Hex | Steel | Steel | 0000000 | 00000 |
Knife Edge | ||||||||||||||
1/2" | 1/2" | 9/32" | 0.016" | 1,500 | 0.1" | 0.187" | 8-32 | 3/8" | 9/64" | Hex | Steel | Steel | 0000000 | 00000 |
Head | Thread | Drive | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Max. Movement | Max. Clamping Force, lbs. | Min. Workpiece Contact | For Slot Dp. | Size | Lg. | Size | Style | Head Material | Screw Material | Pkg. Qty. | Pkg. | |
Blunt Edge | |||||||||||||||
1/2" | 1/2" | 9/32" | 0.016" | 400 | 0.1" | 0.187" | 8-32 | 11/32" | 3/32" | Hex | Brass | Steel | 8 | 0000000 | 0000000 |
1/2" | 1/2" | 9/32" | 0.016" | 1,500 | 0.1" | 0.187" | 8-32 | 3/8" | 9/64" | Hex | Steel | Steel | 8 | 0000000 | 000000 |
Knife Edge | |||||||||||||||
1/2" | 1/2" | 9/32" | 0.016" | 1,500 | 0.1" | 0.187" | 8-32 | 3/8" | 9/64" | Hex | Steel | Steel | 8 | 0000000 | 000000 |
Inside Diameter Fixture Clamps
![](/prerenderstable/mvPRE/contents/gfx/imagecache/134/1341n15c1--2d6abca164a1563827758-p9@halfx_636994065653138208.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/134/1341n15p2-a06-digital@halfx_636880020442704172.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/134/1341n15c1-a06-digital-master1552423070-p9@halfx_636598984234800000.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/134/1341n15--520806186711556656649-p9@halfx_636922369758224476.png?ver=imagenotfound)
Secure a workpiece from the inside diameter, leaving the outside clear for machining. Machine these clamps to match the precise size and contours of your workpiece ID. Mount the clamp to your fixture with the included screws and place your workpiece over it. Turn the socket head cap screw to expand the clamp.
Top-actuated clamps tighten from the top of the clamp, so workpieces need a through hole.
For technical drawings and 3-D models, click on a part number.
Thread | Drive | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For ID Range | Max. Clamp Expansion | Ht. | Flange OD | Max. Clamping Force, lbs. | Size | Lg. | Size | Style | Mounting Fasteners Included | Material | Screw Material | Each | |
Top Actuated | |||||||||||||
0.28"-0.49" | 0.01" | 55/64" | 1 11/64" | 950 | 8-32 | 1" | 9/64" | Hex | Yes | Steel | Steel | 0000000 | 000000 |