M24 Feet | McMaster-Carr

Filter by

System of Measurement

Thread Size

Overall Height

Base Material

Mount Type

Mount Movement

Capacity per Mount

Stud Material

Base Diameter

Thread Pitch

Hex Nut Material

DFARS Compliance

RoHS Compliance

Swivel Range of Motion

Hex Nut Width

REACH Compliance

Base Shape

Minimum Temperature

Maximum Temperature

Thread Type

Thread Length

Hex Nut Finish

Cushion Material

Forward

How can we improve?

25 Products

Swivel Leveling Mounts with Threaded Stud

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Zinc Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Cap. per Mount	Overall Ht.		Each	Cap. per Mount	Overall Ht.		Each
Nickel-Plated Steel Base and Stud


		M24 × 3 mm	89 mm	7.5°	102 mm	19,500 lb.	137 mm	00000000	000000	14,500 lb.	140 mm	00000000	000000
		M24 × 3 mm	108 mm	7.5°	102 mm	19,500 lb.	156 mm	00000000	00000	14,500 lb.	159 mm	00000000	00000

		Zinc Yellow-Chromate-Plated Steel Base and Stud


				M24 × 3 mm	89 mm	7.5°	102 mm	19,840 lb.	137 mm	0000000	00000	14,990 lb.	140 mm	0000000	00000
				M24 × 3 mm	108 mm	7.5°	102 mm	19,840 lb.	156 mm	0000000	00000	14,990 lb.	159 mm	0000000	00000

				303 Stainless Steel Base and Stud


						M24 × 3 mm	89 mm	7.5°	102 mm	19,800 lb.	137 mm	0000000	00000	14,900 lb.	140 mm	00000000	000000
						M24 × 3 mm	108 mm	7.5°	102 mm	19,800 lb.	156 mm	0000000	000000	14,900 lb.	159 mm	00000000	000000

						316 Stainless Steel Base and Stud


								M24 × 3 mm	89 mm	7.5°	102 mm	19,800 lb.	137 mm	0000000	000000	__	__	__	00

Stay-Put Swivel Leveling Mounts with Threaded Stud

Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Two Mounting Holes

Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

							Mounting Holes		Without Cushion			With Rubber Cushion
	Thread Size	Thread Lg.	Cap. per Mount	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Overall Ht.		Each	Overall Ht.		Each
Glass-Filled Nylon Base and Zinc-Plated Steel Stud


		M24 × 3 mm	152 mm	7,500 lb.	7.5°	102 mm	No	11.9 mm	68.8 mm	185 mm	0000000	000000	186.6 mm	0000000	000000
		M24 × 3 mm	152 mm	10,000 lb.	7.5°	127 mm	No	12 mm	98 mm	210 mm	0000000	00000	211.6 mm	00000000	00000

Vibration-Damping Swivel Leveling Mounts with Threaded Stud

A rubber cushion reduces vibration to protect components and extend your machine’s life. These mounts have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.

						With Rubber Cushion
	Thread Size	Thread Lg.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Cap. per Mount	Overall Ht.		Each
304 Stainless Steel Base and Stud


		M24 × 3 mm	4 3/4"	0.17"	7.5°	5 1/2"	3,000 lb.	7"	00000000	0000000
		M24 × 3 mm	5 15/16"	0.12"	7.5°	3 7/8"	2,000 lb.	7 5/8"	00000000	000000
		M24 × 3 mm	5 15/16"	0.17"	7.5°	5 1/2"	4,000 lb.	8 1/8"	00000000	000000

Shock-Absorbing Swivel Leveling Mounts with Threaded Stud

Often used on presses, lathes, and die cutters, these mounts protect machines and floors from damage when equipment suddenly starts and stops. They have a solid rubber base, similar to a hockey puck, that isolates shock. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Round Rubber Base and Zinc-Plated Steel Stud

Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Round Base.

Thread Size	Thread Lg.	Cap. per Mount	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Overall Ht.		Each
M24 × 3 mm	4 5/16"	3,700 lb.	0.13"	7.5°	5"	6"	00000000	0000000
M24 × 3 mm	4 5/16"	8,000 lb.	0.13"	7.5°	5"	6"	00000000	000000

Swivel Leveling Mounts with Threaded Hole

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Dp.	Swivel Range of Motion	Base Dia.	Cap. per Mount	Overall Ht.		Each	Cap. per Mount	Overall Ht.		Each
Zinc Yellow-Chromate-Plated Steel Base


		M24 × 3 mm	17.5 mm	7.5°	102 mm	19,800 lb.	48 mm	0000000	000000	14,960 lb.	51 mm	0000000	000000

		303 Stainless Steel Base


				M24 × 3 mm	17.5 mm	7.5°	102 mm	19,800 lb.	48 mm	0000000	00000	__	__	__	00