M30 Feet | McMaster-Carr

Filter by

System of Measurement

Thread Size

Overall Height

Mount Movement

Base Material

Capacity per Mount

Base Diameter

Thread Type

Swivel Range of Motion

Stud Material

Mount Type

Thread Length

DFARS Compliance

Maximum Temperature

Minimum Temperature

RoHS Compliance

Base Shape

Thread Pitch

Hex Nut Material

Hex Nut Width

REACH Compliance

Cushion Material

Hex Nut Finish

Forward

How can we improve?

14 Products

Swivel Leveling Mounts with Threaded Stud

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Zinc Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Cap. per Mount	Overall Ht.		Each	Cap. per Mount	Overall Ht.		Each
Nickel-Plated Steel Base and Stud


		M30 × 3.5 mm	102 mm	7.5°	152 mm	42,500 lb.	172 mm	00000000	0000000	32,250 lb.	175 mm	00000000	0000000
		M30 × 3.5 mm	152 mm	7.5°	152 mm	42,500 lb.	222 mm	00000000	000000	32,250 lb.	225 mm	00000000	000000

		Zinc Yellow-Chromate-Plated Steel Base and Stud


				M30 × 3.5 mm	102 mm	7.5°	152 mm	42,990 lb.	172 mm	0000000	000000	32,295 lb.	175 mm	0000000	000000
				M30 × 3.5 mm	152 mm	7.5°	152 mm	42,990 lb.	222 mm	0000000	000000	32,295 lb.	225 mm	0000000	000000

				303 Stainless Steel Base and Stud


						M30 × 3.5 mm	102 mm	7.5°	152 mm	42,000 lb.	172 mm	0000000	000000	32,200 lb.	175 mm	00000000	000000
						M30 × 3.5 mm	152 mm	7.5°	152 mm	42,000 lb.	222 mm	0000000	000000	32,200 lb.	225 mm	00000000	000000

Seismic Stay-Put Swivel Leveling Mounts with Threaded Stud

Subjected to rigorous stress tests, these mounts withstand movement in every direction to minimize damage during an earthquake. After leveling your machine, bolt the mount to the floor and tighten the locking nut onto the base for added stability. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Three Mounting Holes

304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

			Cap. per Mount					Mounting Holes			With Rubber Cushion
	Thread Size	Thread Lg.	Load	Pull	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Specs. Met	Overall Ht.		Each
304 Stainless Steel Base and Stud


		M30 × 3.5 mm	7 1/8"	13,480 lb.	6,290 lb.	10°	5 7/8"	No	17/32"	4 3/32"	NZS 4219	11 3/8"	00000000	0000000

Four Mounting Holes

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

			Cap. per Mount					Mounting Holes			With Rubber Cushion
	Thread Size	Thread Lg.	Load	Pull	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Specs. Met	Overall Ht.		Each
304 Stainless Steel Base and Stud


		M30 × 3.5 mm	7 1/8"	13,480 lb.	8,540 lb.	10°	7 7/8"	No	5/8"	4 15/32"	NZS 4219	11 3/8"	00000000	0000000