Filter by
Product Family
For Extrusion Type
Filament Diameter
Heating Block Finish
Finish
Material
Electrical Connection
Insertion Heater Connection
Filament Guide Material
Trade Name
Component
REACH
RoHS
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Insertion Heater Wire Lead Insulation Material
3D Printer Extruder Heating Elements
 |  |
Mosquito |
Replace damaged heating elements in your 3D printer, or switch them out to print at a faster speed or higher temperature. Also known as hotends, these heating elements receive filament from an extruder, melt it, and then pass it through a nozzle onto the part being printed. They are compatible with most fused filament fabrication (FFF) 3D printers. Changes to the heating element or temperature cartridge will also require a software update, or your printer may overheat.
Select a heating element with a voltage and extrusion type that match your printer.
Mosquito—For printing high-temperature filaments, such as PEEK and Ultem PEI, use Mosquito heating elements. They reach temperatures up to 149° C or 300° F higher than V6 or Volcano styles, so you can melt a wider variety of materials. These heating elements come with everything you need, and are partially assembled—you’ll need to connect the insertion heater and temperature sensor.
For Direct Feed Extrusions—In printers with a direct feed, the extruder is attached to the heating element, feeding filament directly into it.
24V DC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Extrusion Type | For Filament Dia., mm | Nozzle Opening Dia., mm | Max. Temp. | Insertion Heater Wattage, W | Heating Block Material | Includes | Pkg. Qty. | Each | |||
Mosquito | |||||||||||
| Direct Feed | 1.75 | 0.4 | 500° C 932° F | 50 | Nickel-Plated Copper | Boron Nitride Paste, One 1-m Lg. Quick-Disconnect Cable for Fan (Molex Female 2 Pin × Standard Male 2 Pin), Three Hex L-Keys | 1 | 3714N44 | 0000000 | ||
EachIn stock | |||||||||||
