These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Made from silicone, these sealants are RTV (room-temperature vulcanizing). They combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Even when used under water, these adhesives maintain their strength.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

For invisible bond lines, these adhesives dry clear.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

Solvents, oils, acids, and other chemicals won't degrade the bond of these adhesives.

To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives.

These thick gels fill gaps up to 0.2" wide—the largest of any of our instant-bond adhesives.

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

Form bonds without the strong odor of other instant-bond adhesives.

These thin liquids, also known as super glue, flow into small gaps.

Accommodate joint movement with these adhesives that remain pliable when cured.

In especially damp or humid environments, these adhesives keep their hold.

Use these adhesives in applications that are highly sensitive to contaminants.

These adhesives withstand temperatures of 390° F or more.

Also known as super glue, these adhesives bond quickly.

For easy positioning, these adhesives begin to harden only when exposed to light.

Moisture, humidity, and immersion in water won't degrade the bond of these adhesives.

Remaining flexible after curing, these glue sticks accommodate joint movement.

Form bonds with twice the strength of our other spray adhesives.

Bond and repair nosing and stair treads with this thick, two-part epoxy.

Install vinyl and rubber treads on stairs with this adhesive.

This general purpose glue tackles a variety of repairs.

Use these glue rolls with 3M dispensing guns.

Apply this glue-like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.