Filter by
Container Type
For Use On
For Joining
Manufacturer Model Number
Maximum Temperature
Container Size
Performance
For Use Outdoors
Mixing Required
Environment
Hardness Rating
Consistency
Minimum Temperature
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Structural Sealants
 |  |
Cartridge | Sausage Pack |
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | Temp., ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, hr. | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Primer Req. for Use On | Choose a Color (Clarity) | Each | |||
Sika Sikaflex Polyurethane Rubber | |||||||||||||||||
| 1-A | 10.1 | Cartridge | 6 | 7 | 550% | -35% to 35% | 175 | Medium Soft (Durometer 35A) | -40 | 170 | Composite Masonry Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Aluminum Plastic Stainless Steel Galvanized Steel | Black (Opaque), Gray (Opaque), White (Opaque) | 6937T93 | 000000 | ||
| 1-A | 20 | Sausage Pack | 6 | 7 | 550% | -35% to 35% | 175 | Medium Soft (Durometer 35A) | -40 | 170 | Composite Masonry Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Aluminum Plastic Stainless Steel Galvanized Steel | Limestone (Opaque) | 6937T401 | 00000 | ||
| 15LM | 10.1 | Cartridge | 6 | 7 | 700% | -50% to 100% | 125 | Soft (Durometer 20A) | -40 | 170 | Composite Masonry Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Aluminum Plastic Stainless Steel Galvanized Steel | Gray (Opaque), White (Opaque) | 6937T561 | 00000 | ||
High-Strength Concrete Joint Sealants
| |
Cartridge | Sausage Pack |
Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | Each | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Wd. | Dp. | Application Temp. Range, ° F | Temp. Range, ° F | For Joining | Color | Each | Pkg. Qty. | Pkg. | ||||
Sika Sikasil Silicone Rubber | |||||||||||||||||||||
| 728 NS | 29 | Cartridge | 25 | 7 | 1,000% | -50% to 100% | 175 | Soft (Durometer 10A) | 1" | 1/2" | 35 to 95 | -80 to 350 | Composite Masonry Metal Plastic Rubber Wood | Limestone | 1671N13 | 000000 | 12 | 1671N131 | 0000000 | ||
Silicone Rubber | |||||||||||||||||||||
| — | 20 | Sausage Pack | 60 | 7 | 1,000% | -50% to 100% | 20 | Medium Hard (Durometer 55A) | 1" | 1/2" | 60 to 85 | -20 to 300 | Composite Glass Masonry Metal Plastic Rubber Wood | Gray | 1598N3 | 00000 | 12 | 1598N031 | 000000 | ||
| — | 29 | Cartridge | 60 | 7 | 1,000% | -50% to 100% | 20 | Medium Hard (Durometer 55A) | 1" | 1/2" | 60 to 85 | -20 to 300 | Composite Glass Masonry Metal Plastic Rubber Wood | Gray | 1598N4 | 00000 | 10 | 1598N041 | 000000 | ||
Noncorrosive Silicone Rubber Sealants
|  |
Cartridge | Tube |
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Color (Clarity) | Each | |||
Loctite® Silicone Rubber | ||||||||||||||||
| SI 5011 CL | 2.7 | Tube | 20 | 24 | 300% | Not Rated | 170 | Soft (Durometer 20A) | -75 | 400 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | Clear (Clear) | 7770A27 | 000000 | ||
| SI 5011 CL | 10.1 | Cartridge | 20 | 24 | 300% | Not Rated | 170 | Soft (Durometer 20A) | -75 | 400 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | Clear (Clear) | 7770A28 | 00000 | ||
| SI 5109 | 10.1 | Cartridge | 60 | 24 | 300% | Not Rated | 215 | Soft (Durometer 15A) | -75 | 600 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | Red (Opaque) | 7770A26 | 00000 | ||
Low-Outgassing Silicone Rubber Sealants
|
Cartridge |
Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum. Made of silicone rubber, they’re RTV (room-temperature vulcanizing), so they’ll fully harden at room temperature.
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Temp. Range, ° F | Specs. Met | For Joining | Color | Each | ||
| 5.8 | Cartridge | 150 | 7 | 420% | -25% to 25% | 600 | Medium Soft (Durometer 36A) | -200 to 500 | ASTM E595 | Composite Glass Metal Plastic Rubber | White | 4842N11 | 0000000 | |
Puncture-Resistant Sealants
| |
Cartridge | Sausage Pack |
Form seals that resist punctures, cuts, and abrasion to withstand heavy wear and tampering. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Primer Req. for Use On | Color (Clarity) | Each | |||
Polyurethane Rubber | ||||||||||||||||
| 10.1 | Cartridge | 90 | 48 | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20 | 120 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood | Grout Concrete Glass Plaster Stone | White (Opaque) | 1743N11 | 000000 | ||
| 20 | Sausage Pack | 90 | 48 | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20 | 120 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood | Grout Concrete Glass Plaster Stone | White (Opaque) | 1743N12 | 00000 | ||
Flexible Instant-Bond Adhesives
 |
Create bonds that can bend without breaking. These adhesives remain elastic even after hardening.
Apply an accelerator first to reach a full-strength bond faster.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
ISO 10993—Comply with biocompatibility standards for medical-grade applications.
%20--%3e%3cg%3e%3cg%20id='Layer_1'%3e%3cpath%20class='cls-1'%20d='M68,27.2c-14.6,0-26.4,11.7-26.4,26.3,0,7,2.8,13.7,7.7,18.7v44.8l18.8-16.1,18.7,16.1v-44.9c10.3-10.3,10.3-27,0-37.3-5-4.9-11.7-7.7-18.7-7.7h0ZM81.3,105l-13.2-11.4-13.2,11.4v-28.7c8.2,4.8,18.3,4.8,26.5,0v28.7ZM76.2,70.8c-5.2,2.5-11.2,2.5-16.4,0-9.5-4.5-13.5-15.9-9-25.4,4.5-9.5,15.9-13.5,25.4-9,9.5,4.5,13.5,15.9,9,25.4-1.9,4-5.1,7.1-9,9Z'/%3e%3cpath%20class='cls-2'%20d='M5.8,95.5c-1.2,0-2.1-1-2.1-2.1,0,0,0,0,0,0V29.4h20.9c2.1,0,3.8-1.7,3.8-3.8V3.7c.2,0,.4,0,.5,0h37.5c1.2,0,2.1,1,2.1,2.1v18.6c1.2,0,2.5.1,3.7.3V5.8C72.2,2.6,69.6,0,66.4,0H28.9c-1.5,0-3,.6-4.1,1.7h-.1c0,.1-23,23.2-23,23.2-1.1,1.1-1.7,2.6-1.7,4.1v64.3c0,3.2,2.6,5.8,5.8,5.8h41.7v-3.7H5.8ZM24.7,7.1v18.7H6L24.7,7.1Z'/%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, hr. | Consistency | Viscosity, cP | Max. Gap Size Filled | Elongation | Temp. Range, ° F | Specs. Met | For Joining | Each | |||
Loctite® | |||||||||||||||
| 4902 | 0.7 | Bottle | 10 | 24 | Thin Liquid | 200 | 0.004" | 155% | -65 to 180 | ISO 10993 | Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood | 74795A397 | 000000 | ||
High-Temperature Wicking Instant-Bond Adhesives
 |
Bottle |
Create secure bonds between installed parts at temperatures up to 480° F. Our thinnest adhesives use capillary action to pull themselves deep into close-fitting seams—like water up the roots of a tree.
Apply an accelerator first to reach a full-strength bond faster.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
Mil. Spec.—Manufactured and tested to meet strict U.S. military standards for performance and reliability.
Container | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, hr. | Heating Req. to Reach Full Strength | Cure Type | Consistency | Viscosity, cP | Max. Gap Size Filled | Temp. Range, ° F | Specs. Met | For Joining | Each | |||
Permabond | ||||||||||||||||
| 919 | 1 | Bottle | 10 | 6 | 4 Hrs. Air Dry Then 2 Hrs. @ 305°F | Heat, Room Temperature | Thin Liquid | 4 | 0.002" | -65 to 480 | MIL-A-46050 Type V Class 1 | Composite, Metal, Plastic, Rubber | 7585A43 | 000000 | ||
Light-Activated Instant-Bond Adhesives
 |
Take your time positioning parts that require precise alignment, such as optical instruments. Instead of gripping immediately, these adhesives only harden when you expose them to a compatible light source.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
ISO 10993—Comply with biocompatibility standards for medical-grade applications.
Container | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, hr. | Light Intensity Req. to Reach Full Strength | Cure Type | Consistency | Viscosity, cP | Max. Gap Size Filled | Temp. Range, ° F | Specs. Met | For Joining | Each | |||
Loctite® | ||||||||||||||||
| 4311 | 1 | Bottle | 5 | 24 | 10 sec. @ 30 mW/cm² | UV Light, Visible Light | Thin Liquid | 1,050 | 0.008" | -65 to 200 | ISO 10993 | Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood | 1700A5 | 000000 | ||
Roof Joint Sealants
|
Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Cannot Be Sold To—Sealants that cannot be sold to the listed areas are restricted due to product regulations.
Container | Temp., ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Application Temp. Range, ° F | Min. | Max. | For Joining | Color (Clarity) | Cannot Be Sold To | Each | |||
Plastic | |||||||||||||||||
| 10.1 | Cartridge | 25 | 14 | 560% | -12.5% to 12.5% | 500 | Medium Soft (Durometer 35A) | 20 to 110 | -40 | 180 | Masonry Metal Rubber Wood | Clear (Clear) | California | 1604N15 | 000000 | ||
Quick-Set Wicking Instant-Bond Adhesives
|
Bottle |
Bond parts that are already installed in half the time of our other wicking instant-bond adhesives. Our thinnest adhesives use capillary action to pull themselves deep into close-fitting seams—like water up the roots of a tree.
Apply an accelerator first to reach a full-strength bond faster.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
Mil. Spec.—Manufactured and tested to meet strict U.S. military standards for performance and reliability.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, hr. | Consistency | Viscosity, cP | Max. Gap Size Filled | Temp. Range, ° F | Specs. Met | For Joining | Each | |||
Permabond | ||||||||||||||
| 101 | 1 | Bottle | 5 | 24 | Thin Liquid | 3 | 0.002" | -65 to 180 | Fed. Spec. A-A-3097, MIL-A-46050 Type II Class 1 | Composite, Metal, Plastic, Rubber | 7580A81 | 000000 | ||
| 910FS | 1 | Bottle | 5 | 24 | Thin Liquid | 3 | 0.002" | -65 to 190 | Fed. Spec. A-A-3097, MIL-A-46050 Type I Class 1 | Composite, Metal, Plastic, Rubber | 7580A65 | 00000 | ||
Structural Oil- and Fuel-Resistant Sealants
 | |
Cartridge | Tube |
Impervious to the swelling effects of oils, fuels, and solvents, use this high-strength silicone rubber sealant to assemble and repair fuel systems and tanks. Silicone rubber forms a tough, rubbery, UV-resistant seal that remains flexible over time. It's non-sagging, so it won't drip from vertical and overhead surfaces. Also known as RTV (room-temperature vulcanizing).
Elongation and joint expansion/compression tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. This sealant is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Color (Clarity) | Each | |||
Dow Silicone Rubber | ||||||||||||||||
| 730 FS | 3 | Tube | 12 | 24 | 200% | Not Rated | 300 | Medium Soft (Durometer 40A) | -70 | 350 | Composite Masonry Metal Plastic Rubber | White (Opaque) | 1531N13 | 0000000 | ||
| 730 FS | 5.8 | Cartridge | 12 | 24 | 200% | Not Rated | 300 | Medium Soft (Durometer 40A) | -70 | 350 | Composite Masonry Metal Plastic Rubber | White (Opaque) | 1531N14 | 000000 | ||
High-Temperature Instant-Bond Adhesives
|
Bottle |
Our most heat-resistant adhesives keep a strong grip at temperatures up to 480° F.
Apply an accelerator first to reach a full-strength bond faster.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
Thick Liquid—Fill larger gaps than thin-liquid adhesives, so they're better for bonding slightly misaligned or uneven surfaces.
Mil. Spec.—Manufactured and tested to meet strict U.S. military standards for performance and reliability.
Container | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, hr. | Heating Req. to Reach Full Strength | Cure Type | Consistency | Viscosity, cP | Max. Gap Size Filled | Temp. Range, ° F | Specs. Met | For Joining | Each | |||
Permabond | ||||||||||||||||
| 820 | 1 | Bottle | 10 | 24 | — | Room Temperature | Thin Liquid | 100 | 0.006" | -65 to 390 | — | Composite, Metal, Plastic, Rubber | 7585A41 | 000000 | ||
| 920 | 1 | Bottle | 10 | 6 | 4 Hrs. Air Dry Then 2 Hrs. @ 305°F | Heat, Room Temperature | Thin Liquid | 80 | 0.006" | -65 to 480 | MIL-A-46050 Type V Class 2 | Composite, Metal, Plastic, Rubber | 7585A42 | 00000 | ||
| 922 | 1 | Bottle | 10 | 6 | 4 Hrs. Air Dry Then 2 Hrs. @ 305°F | Heat, Room Temperature | Thick Liquid | 1,600 | 0.017" | -65 to 480 | MIL-A-46050 Type V Class 3 | Composite, Metal, Plastic, Rubber | 7585A44 | 00000 | ||
Quick-Set Instant-Bond Adhesives
|
Bottle |
Minimize downtime during joint assembly and repair. These adhesives form bonds in five seconds or less—up to 15 times faster than standard instant-bond adhesives.
Apply an accelerator first to reach a full-strength bond even faster.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
Thick Liquid—Fill larger gaps than thin-liquid adhesives, so they're better for bonding slightly misaligned or uneven surfaces.
Mil. Spec.—Manufactured and tested to meet strict U.S. military standards for performance and reliability.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, hr. | Consistency | Viscosity, cP | Max. Gap Size Filled | Temp. Range, ° F | Specs. Met | For Joining | Each | |||
Loctite® | ||||||||||||||
| 414 | 0.1 | Tube | 2 | 24 | Thin Liquid | 125 | 0.006" | -65 to 180 | Fed. Spec. A-A-3097 | Composite, Metal, Plastic, Rubber | 7625A16 | 00000 | ||
Permabond | ||||||||||||||
| 102 | 1 | Bottle | 5 | 24 | Thin Liquid | 80 | 0.006" | -65 to 180 | MIL-A-46050 Type II Class 2 | Composite, Metal, Plastic, Rubber | 7580A82 | 00000 | ||
| 268 | 1 | Bottle | 5 | 24 | Thick Liquid | 1,800 | 0.017" | -65 to 180 | MIL-A-46050 Type II Class 3 | Ceramic, Composite, Metal, Plastic, Rubber | 7580A53 | 00000 | ||
High-Strength Self-Leveling Concrete Joint Sealants
|
Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Sikaflex—When Sika Sikaflex Polyurethane requires a primer, for best results use Primer 260 on metal and Primer 449 on plastic and rubber.
Container | For Max. Crack | Each | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, hr. | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Wd. | Dp. | Application Temp. Range, ° F | Temp. Range, ° F | For Joining | Color | Each | Pkg. Qty. | Pkg. | ||||
Sika Sikaflex Polyurethane Rubber | |||||||||||||||||||||
| 1C SL | 10.1 | Cartridge | 2 | 5 | 320% | -25% to 25% | 150 | Medium Soft (Durometer 35A) | 1/2" | 1/2" | 40 to 100 | -40 to 170 | Composite Glass Masonry Metal Plastic Rubber Wood | Limestone | 1660N12 | 000000 | 24 | 1660N121 | 0000000 | ||
| 1C SL | 29 | Cartridge | 2 | 5 | 320% | -25% to 25% | 150 | Medium Soft (Durometer 35A) | 1/2" | 1/2" | 40 to 100 | -40 to 170 | Composite Glass Masonry Metal Plastic Rubber Wood | Limestone | 1660N13 | 00000 | 12 | 1660N131 | 000000 | ||
Instant-Bond Adhesives
|
Bottle |
Create strong, permanent bonds in 75 seconds or less. Also known as super glue, these adhesives are ideal for fast assembly and repair.
Apply an accelerator first to reach a full-strength bond even faster.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
Thick Liquid—Fill larger gaps than thin-liquid adhesives, so they're better for bonding slightly misaligned or uneven surfaces.
Mil. Spec.—Manufactured and tested to meet strict U.S. military standards for performance and reliability.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, hr. | Consistency | Viscosity, cP | Max. Gap Size Filled | Temp. Range, ° F | Specs. Met | For Joining | Each | |||
Permabond | ||||||||||||||
| 105 | 1 | Bottle | 10 | 24 | Thin Liquid | 40 | 0.004" | -65 to 180 | MIL-A-46050 Type II Class 1 | Composite, Metal, Plastic, Rubber | 7580A83 | 000000 | ||
| 200 | 1 | Bottle | 15 | 24 | Thick Liquid | 1,500 | 0.015" | -65 to 180 | — | Composite, Metal, Plastic, Rubber | 7580A84 | 00000 | ||
| 240 | 1 | Bottle | 15 | 24 | Thick Liquid | 1,850 | 0.017" | -65 to 180 | — | Cardboard, Composite, Fabric, Metal, Plastic, Rubber, Wood | 7580A85 | 00000 | ||
| 910 | 1 | Bottle | 10 | 24 | Thin Liquid | 80 | 0.006" | -65 to 190 | Fed. Spec. A-A-3097, MIL-A-46050 Type I Class 2 | Composite, Metal, Plastic, Rubber | 7580A52 | 00000 | ||
| 910 | 16 | Bottle | 10 | 24 | Thin Liquid | 80 | 0.006" | -65 to 190 | Fed. Spec. A-A-3097, MIL-A-46050 Type I Class 2 | Composite, Metal, Plastic, Rubber | 7580A74 | 000000 | ||
