We will reply to your message within an hour.
More
Also known as Oilite® bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.
The oil in these bearings is suitable for incidental contact with food.
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.
Use where high loads and speeds are not required.
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
An aluminum shell adds strength.
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.
These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.
Good for underwater applications, these bearings won’t swell or warp when wet.
Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit.
Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They swivel to compensate for a small amount of shaft misalignment.
These bronze bearings are strong, wear resistant, and excellent at handling shock loads.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Furnished with a traceable lot number and material test report, these bronze bearings are strong, wear resistant, and excellent at handling shock loads.
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.
Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.
Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.
Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.
Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.
With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.
A smooth base provides more contact with the mating surface than weld nuts with projections.
A smooth base on these metric nuts provides more contact with the mating surface than weld nuts with projections
Weld these nuts to stainless steel surfaces.
Projections on the base concentrate the weld and provide room for heat to dissipate.
These nuts can be used in channels and tight spaces where round-base weld nuts won't fit.
Use these metric nuts in channels and tight spaces where round-base weld nuts won't fit.
These nuts have three mounting holes to accept screws and rivets for use with thin materials.
These screw-mount nuts are often used to attach glides and levels to wood.
The flanged housing makes these bearings a good solution for vertical linear motion applications.
The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.
A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.
The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings.
Slide up to two linear ball or sleeve bearings into these housings and secure them with the included internal retaining rings.
Replace worn or damaged wheel bearings to keep your equipment rolling.
Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.
Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.
Also known as single-start ball screws and nuts, these have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts.
Keep your ball screw spinning without the ball nut damaging your system. When the ball nut reaches the stop pin at either end of the ball screw, it disengages and begins to idle.
Multiple thread channels (also known as thread starts) create faster linear travel than ball screws with a single thread start.