Low-Pressure Steel Unthreaded Pipe Flanges
Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line. Flanges are for use with low-pressure applications in noncorrosive environments.
Slip-on weld flanges have no internal stop. Slide a pipe through the flange and weld on both sides.
Cap flanges are also known as blind flanges.
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: See table
- Certification: See table
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: See Table
Bolt Hole | For Fitting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size  | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Schedule | Material | Specifications Met | Each | |
| 1 | 4 59/64" | 5/8" | 0.748" | 4 | 3 35/64" | Not Rated | Not Rated | 40 | Iron, Steel | ASTM A105, JIS B 2220 | 1752N14 | 000000 |
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: See table
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Schedule 40 iron or steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Specifications Met | Each | |
| 1 | 4 59/64" | 5/8" | 0.748" | 4 | 3 35/64" | Not Rated | Not Rated | ASTM A105, JIS B 2220 | 1752N17 | 000000 |
Press-Connect Fittings for Copper Tubing
- For Use With: Drinking Water
- Maximum Pressure: Fittings compatible with Viega ProPress or Viega ProPress XL-C: 200 psi @ 72° F
Fittings compatible with Viega Pex or Viega PureFlow Press: 100 psi @ 72° F - Temperature Range: 0° to 250° F
- Tubing: Fittings compatible with Viega ProPress or Viega ProPress XL-C: Use with K, M, L copper
Fittings compatible with Viega Pex or Viega PureFlow Press: Use with hard polyethylene plastic - Specifications Met: See table
Crimp these fittings to copper tubing with a crimping tool (sold separately). An O-ring on the inside of the fitting creates a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings. Fittings have good corrosion resistance. They meet NSF/ANSI safety standards for use with drinking water systems.
Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.
Straight adapters with flanged end bolt to equipment or other flanged connections found on pumps and valves to create a convenient access point.
Bolt Hole | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copper Tube Size | For Tube OD | Pipe Size | Flange OD | Bolt Circle Dia. | Dia. | No. of | For Bolt Dia. | Bolts Included | Lg. | Material | Flange Material | Compatible With | Specifications Met | Each | |
| 1 1/2 | 1 5/8" | 1 1/2 | 4 59/64" | 3 55/64" | 5/8" | 4 | 1/2" | No | 3 1/16" | Bronze | Powder-Coated Steel | Viega ProPress | ASME B16.51, ASME B31.1, ASME B31.3, ASME B31.9, FM Approved, NSF/ANSI 61 | 1747N458 | 0000000 |
| For Copper Tube Size | For Tube OD | O-Ring Material | Compatible With | Each | |
| 1 1/2 | 1 5/8" | EPDM Rubber | Viega ProPress | 1747N847 | 00000 |
Jaws for copper tube sizes ½ to 2 fit directly into the included crimping tool.
Battery | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Copper Tube Size | For Tube OD | Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Specifications Met | Each | |
| 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 5/8", 7/8", 1 1/8", 1 3/8", 1 5/8", 2 1/8" | 18V DC | 2 | 3 | Yes | 39 | Viega ProPress | EMC 2011/65/EU, EMC 2014/30/EU, IEC 62841-1, UL 62841-1 | 2233N328 | 000000000 |