We will reply to your message within an hour.
The flanged ends on these expansion joints rotate for easy bolt hole alignment during installation.
These expansion joints have a double-bulb design for extra movement and vibration absorption.
Connect different pipe sizes in your line while adding a point of flexibility between them. These expansion joints absorb movement between two connected pipes to reduce stress, vibration, and noise.
The EPDM lining in these joints meets NSF/ANSI 61 standard for use with drinking water.
Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.
The included plastic sleeves and washers provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.
These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.
Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.
Made of EPDM rubber, these gaskets also resist salt water.
Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.
Aramid fibers are blended with SBR rubber to resist inert gases. These gaskets also resist abrasion.
Often called controlled swell gaskets, these gaskets absorb water near the inside of the flange and swell to fill gaps. Use them on uneven surfaces, such as grooved, corroded, or pitted flanges.
These gaskets resist boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.
Resistant to water and salts, these silicone rubber gaskets can handle temperatures up to 450° F.
Carbon is blended with Buna-N rubber for gaskets that are unaffected by oil and temperatures up to 650° F.
Made from a blend of graphite and Buna-N rubber, these gaskets withstand temperatures up to 650° F.
In addition to withstanding temperatures up to 450° F, these silicone rubber gaskets resist water and salts.
These blended carbon/Buna-N rubber gaskets are unaffected by oil and temperatures up to 650° F.
These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.
Resistant to boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.
Also resistant to salt water.
The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.
These neoprene gaskets also resist salts.
Aramid fibers and SBR rubber are blended for resistance to water, inert gases, and abrasion.
In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.
Furnished with enough nuts and bolts to create a connection between two steel pipe flanges.
These compressible Buna-N rubber gaskets ensure a tight seal. They also resist water and salts.
Create a tight seal on grooved-end pipe fittings that are exposed to oil. These gaskets are Buna-N, so they won't break down from oil.
Form a snug seal on grooved-end pipe fittings where water is a concern. Made of EPDM rubber, these gaskets won't break down from contact with water.
Also resist aliphatic hydrocarbons, such as ethylene.
Resist boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.
Slide these seals over roof flashings for added protection and to create an extra-watertight seal without the need for caulk. They’re also known as storm or rain collars.
Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.
Attach the cuff end with a hose clamp and screw mount the flange end.
Interlock bellows, mounting flanges, and links to create a custom-length bellows. These molded bellows are airtight to keep contaminants out.
Attach the cuff end with a hose clamp, and screw mount the flange end.
Slide these bellows over square rods and shafts.
Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.
Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.