Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Use these heavy duty forged flanges for high-pressure applications.

Create an access point in systems where corrosion is a concern. Made of stainless steel, these bleed rings resist rusting.

Use these corrosion-resistant fittings in a low-pressure pipe line.

Bolt two flanges of the same size together with a gasket to create an access point in a pipe line.

FM-approved for fire protection applications, these flanges are cast iron, so they're brittle and can be quickly opened by hitting them with a sledge hammer.

With thicker, stronger walls than our standard-wall butt-weld pipe fittings, these fittings stand up to your high strength applications.

Access the inside of lines, so you can vent pressure, drain liquid, or take samples. Made of black-coated steel, these bleed rings should be used in dry environments to prevent rusting.

Use these fittings for low-pressure applications in noncorrosive environments.

Suitable for use in fire-protection applications, these flanges are brittle and can be quickly opened with the strike of a sledge hammer.

With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications.

Also known as Pressure Class 1500 steel flanges, these have the strength to handle high pressures.

Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Flanges are aluminum, which is lightweight with good corrosion resistance.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

Use these polypropylene flanges in outdoor environments—they resist the damaging effects of ultraviolet light. They have the chemical resistance to stand up to acids, solvents, and other harsh substances. Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are also known as Pressure Class 150 flanges.

Flanges have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. They are reinforced with fiberglass layers for better strength and durability than any of our other pipe flanges for chemicals. Bolt two same-size flanges together with a gasket to create an access point within a line.

The flanged ends on these expansion joints rotate for easy bolt hole alignment during installation.

These expansion joints have a double-bulb design for extra movement and vibration absorption.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.

These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.

Made of EPDM rubber, these gaskets also resist salt water.

Aramid fibers are blended with SBR rubber to resist inert gases. These gaskets also resist abrasion.

Also known as Gore GR.

Reinforced with a stainless steel insert, these gaskets are stronger and can hold their shape better than gaskets without an insert.

Made of pure PTFE, these gaskets have a slippery surface that prevents sticking.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

Carbon is blended with Buna-N rubber for gaskets that are unaffected by oil and temperatures up to 650° F.

Also known as spiral-wound gaskets, these have a carbon steel outer ring and a 304 stainless steel inner sealing element with a graphite-based filler.

These gaskets have a carbon steel outer ring and a 304 stainless steel inside sealing element with a PTFE filler that’s virtually chemically inert. They're also known as spiral-wound gaskets.

A space between the outer ring and the sealing element prevents the element from being squeezed inward and contaminating the process line.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.

Also known as Gore GR.

Made of soft expanded PTFE, these gaskets are reinforced with a stainless steel insert for added strength. They can hold their shape better than gaskets without an insert.

These pure PTFE gaskets have a slippery surface that prevents sticking.

A stainless steel insert in these PTFE gaskets adds strength and makes them reusable.

In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.

Also resistant to salt water.

The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.

Form a snug seal on grooved-end pipe fittings where water is a concern. Made of EPDM rubber, these gaskets won't break down from contact with water.