Mount these switches from outside the tank through a threaded connection at the top or bottom of your tank.

Install these switches into an unthreaded hole at the top or bottom of your tank and secure with a nut from inside the tank.

Mount these switches through an unthreaded hole in your tank wall and secure with a nut from outside the tank.

For use in locations with flammable gases and combustible dust, this switch is UL listed and CSA certified for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G.

Empty and fill your tank with a single device—these dual-level switches include two float switches that actuate at different levels. Mount through a threaded connection at the top of your tank.

Install these switches into a threaded connection in your tank wall from outside the tank.

For visual monitoring and easy access, these switches are housed in a clear acrylic reservoir that mounts to the outside of your tank.

These switches are CSA certified for hazardous locations.

Install these switches through a tank wall.

Install these switches into an unthreaded hole at the top or bottom of your tank and secure with a nut from inside the tank.

Designed for use in areas where flammable substances are present, these switches are CSA certified for hazardous locations.

Install these switches into a threaded connection in your tank wall from outside the tank.

Install one of these relays to actuate equipment that has a higher current rating than your switch.