McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    12 Products

    Low-Odor Vehicle-Grade Antislip Protective Coatings

    These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction for pedestrian, cart, and hand-truck traffic. Apply with a roller. The size listed is the combined total of the two parts.
    Epoxy—Can
    Image of Product. Front orientation. Protective Coatings. Low-Odor Vehicle-Grade Antislip Protective Coatings.
    Container
    Size, gal.
    Solution
    Type
    Overall Dry
    Time, hr.
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Mix
    Ratio
    Application Time
    After Mixing, min.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Specs. Met
    For Use
    Outdoors
    For Use On
    Choose a Color
    Each
    1/2Water Based4825 ft² @ 30 milYes3:14530050 to 100ADA Compliant, ASTM D3960YesAluminum, Steel, Iron, Concrete, Wood
    Semi-Gloss Black
    ,
    Semi-Gloss Gray
    ,
    Semi-Gloss Red
    ,
    Semi-Gloss Yellow
    		0000000000000
    1Water Based4850 ft² @ 30 milYes3:14530050 to 100ADA Compliant, ASTM D3960YesAluminum, Steel, Iron, Concrete, Wood
    Semi-Gloss Black
    ,
    Semi-Gloss Gray
    ,
    Semi-Gloss Red
    ,
    Semi-Gloss Yellow
    		0000000000000
     

    Antislip Protective Coatings

    Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
    Epoxy—Aerosol Can
    Image of Product. Front orientation. Protective Coatings. Antislip Protective Coatings, Epoxy—Aerosol Can.
    Dry Time
    Container
    Net Wt., oz.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    For Use
    Outdoors
    For Use On
    Choose a Color
    Each
    12Solvent Based202415 ft² @ 1 milNo25050 to 90YesAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Iron, Galvanized Iron, Galvanized Steel, Fiberglass, Masonry, Concrete, Stone, Asphalt, Wood
    Gloss Black
    ,
    Gloss Clear
    ,
    Gloss Dark Gray
    ,
    Gloss Red
    ,
    Gloss Yellow
    		00000000000000
     
    Covers
    Each
    Roller Cover for Solvent-Based Coatings000000000000
    Epoxy—Can
    Image of Product. Front orientation. Protective Coatings. Antislip Protective Coatings, Epoxy—Can.
    Apply gallon-sized solvent-based coatings with a notched trowel, sprayer, or a roller cover for thick coatings (sold separately).
    Apply gallon-sized water-based coatings with a roller.
    Water Based—Water-based epoxy coatings are clear and can be applied over nearly any surface, even old coatings, without altering their appearance. These two-part coatings come with a mixer that attaches to a hand-held drill and a roller cover to apply them once mixed. The size listed is the combined total of the two parts.
    OSHA Compliant 29 CFR 1910.22—Coatings that comply with OSHA 29 CFR 1910.22 meet requirements for walking-working surfaces.
    Dry
    Time
    Container
    Size, gal.
    Solution
    Type
    Touch
    Overall
    Approx. Coverage
    @ Thk.
    Approx. Coverage,
    ft²
    Mixing
    Req.
    Mix
    Ratio
    Application Time
    After Mixing, min.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Specs. Met
    For Use
    Outdoors
    For Use On
    Primer Req. for Use On
    Includes
    Choose a Color
    Each
    1Water Based27 min.30 min.185 ft² @ 38 mil—Yes4:12518050 to 120OSHA Compliant 29 CFR 1910.22
    		YesAluminum, Brass, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall—Mixer, Roller CoverGloss Clear00000000000000
    1Solvent Based12 hr.3 day—50No——16050 to 120ASTM F609YesAluminum, Steel, Iron, Fiberglass, Concrete, WoodAluminum, Steel, Iron, Concrete, Wood—
    Flat Black
    ,
    Flat Dark Gray
    ,
    Flat Yellow
    		00000000000000
     
    Covers
    Each
    Roller Cover for Solvent-Based Coatings000000000000

    Vehicle-Grade Antislip Protective Coatings

    Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface. Apply with a notched trowel, roller, or sprayer. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
    Epoxy—Can
    Image of Product. Front orientation. Protective Coatings. Vehicle-Grade Antislip Protective Coatings, Epoxy—Can.
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    hr.
    Overall,
    day
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Application Time
    After Mixing, hr.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Specs. Met
    For Use
    Outdoors
    For Use On
    Cannot Be Sold To
    Choose a Color
    Each
    1Solvent Based12340 ft² @ 2 milYes416050 to 130ADA Compliant, ASTM F609YesAluminum, Steel, Iron, Fiberglass, Concrete, WoodLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA
    Flat Black
    ,
    Flat Dark Gray
    		00000000000000
     
    Epoxy—Pail
    Image of Product. Front orientation. Protective Coatings. Vehicle-Grade Antislip Protective Coatings, Epoxy—Pail.
    Coatings in a pail have a resin and a hardener in separate containers that can be mixed in the pail.
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    hr.
    Overall,
    day
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Application Time
    After Mixing, hr.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Specs. Met
    For Use
    Outdoors
    For Use On
    Cannot Be Sold To
    Choose a Color
    Each
    5Solvent Based123200 ft² @ 2 milYes416050 to 130ADA Compliant, ASTM F609YesAluminum, Steel, Iron, Fiberglass, Concrete, WoodLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA
    Flat Black
    ,
    Flat Dark Gray
    		00000000000000
     

    Antislip Coating Paint Primers for Metal

    Image of Product. Front orientation. Paint Primers. Antislip Coating Paint Primers for Metal.
    Use these paint primers on your surface before antislip coatings to maximize longevity. They do not contain grit. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.
    Cannot Be Sold To—They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Application Time
    After Mixing, hr.
    Max. Temp.,
    ° F
    For Topcoat
    Composition
    For Use On
    Color
    Cannot Be Sold To
    Each
    Can—Epoxy
    1Solvent Based6012270 ft² @ 4 mil4160Solvent BasedAluminum, Steel, IronGrayLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA00000000000000
     

    Heavy Duty Vehicle-Grade Antislip Protective Coatings

    These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction. Apply with a roller. The resin and hardener come in separate containers that can be mixed in the pail. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
    Epoxy—Can
    Image of Product. Front orientation. Protective Coatings. Heavy Duty Vehicle-Grade Antislip Protective Coatings, Epoxy—Can.
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    hr.
    Overall,
    day
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Application Time
    After Mixing, hr.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Mil. Spec.
    For Use
    Outdoors
    For Use On
    Primer Req. for Use On
    Color
    Cannot Be Sold To
    Each
    1Solvent Based24425 ft² @ 2 milYes816040 to 100MIL-PRF-24667 Type II Composition G, MIL-PRF-24667 Type IV Composition GYesAluminum, Steel, Iron, Concrete, WoodAluminum, Steel, Iron, Concrete, WoodFlat Dark GrayLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA00000000000000
     
    Epoxy—Pail
    Image of Product. Front orientation. Protective Coatings. Heavy Duty Vehicle-Grade Antislip Protective Coatings, Epoxy—Pail.
    MIL-PRF-24667 Type I Composition G—Coatings that meet MIL-PRF 24667 Type 1 are our most wear and impact resistant. They can also be applied with a notched trowel.
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    hr.
    Overall,
    day
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Application Time
    After Mixing, hr.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Mil. Spec.
    For Use
    Outdoors
    For Use On
    Primer Req. for Use On
    Color
    Cannot Be Sold To
    Each
    5Solvent Based244125 ft² @ 2 milYes416040 to 100MIL-PRF-24667 Type I Composition G, MIL-PRF-24667 Type II Composition GYesAluminum, Steel, Iron, Concrete, WoodAluminum, Steel, Iron, Concrete, WoodFlat Dark GrayLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA00000000000000
    5Solvent Based244125 ft² @ 2 milYes816040 to 100MIL-PRF-24667 Type II Composition G, MIL-PRF-24667 Type IV Composition GYesAluminum, Steel, Iron, Concrete, WoodAluminum, Steel, Iron, Concrete, WoodFlat Dark GrayLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA0000000000000
     
    back to top