The indicator moves when flow is present, so it’s easy to visually confirm flow from a distance.

For visual confirmation of flow from a distance, these sights have a ball indicator that moves when flow is present.

A ball indicator increases the visibility of flow for checking at a distance.

Withstand twice the temperature of standard sights. These are rated for temperatures up to 400° F.

To maintain a clear view of your process media without disrupting flow, twist the tubular window to clear debris and buildup with the internal wipers.

The included mounting ring lets you install these sights in instrument panels.

About half the height of other flow sights for chemicals, these fit in areas with limited clearance.

Check the flow rate of liquids in your system.

A spring piston instead of a float allows these flowmeters to measure flow rate in any mounting orientation.

With a maximum temperature of 240° F and a maximum pressure of 3,500 psi, these flowmeters measure the flow rate of liquids that are too hot or pressurized for standard flowmeters.

To avoid metal contaminating liquids, such as deionized water, these flowmeters are made entirely of plastic and rubber.

A 304 stainless steel case protects these flowmeters from blows that could shatter the glass body.

Easily install the unthreaded ends of these flowmeters into a PVC piping system.

Fittings on the back let you install these flowmeters in instrument panels.

Install these flowmeters in an instrument panel to measure the flow rate of hot water and other liquids reaching up to 212° F.

Monitor the flow rate of air and other gases from your instrument panel—these flowmeters have fittings on the back for panel mounting.

Designed for air and other gases, these flowmeters measure the rate at which they're moving through your pipes.

A case protects these flowmeters from blows and other impact as they measure the flow rate of gas. Install them in instrument panels using the fittings on the back.

If the oil in your line is too hot or pressurized for standard flowmeters, use these flowmeters to measure the flow rate.

For secure connections in large pipelines with high flow rates, these flowmeter/totalizers have flanged ends.

With a display that can be placed up to 25 feet from the sensor, these flowmeter/totalizers are often used in hard-to-access areas.

Determine the flow rate and total flow volume of water with the same meter.

Flanged ends let you securely integrate these totalizers into large drinking water pipelines to measure the cumulative amount of water flowing through them.

Meeting NSF/ANSI 61, these totalizers measure the cumulative amount of drinking water flowing through them.

Use these totalizers to measure the total amount of liquid up to 200° F flowing through your pipe system.

The digital display on these totalizers makes it easy to check the total amount of high-temperature liquid—up to 200° F—passing through your system.

Install this totalizer on your grease gun or valve to measure grease dispensing and reduce waste.

Track batches and the total amount of gasoline, diesel fuel, and kerosene passing through your system.

Send flow rate data using these transmitters while also being able to visually confirm liquid is flowing.

Also known as magmeters, these transmitters use a magnetic field to measure flow rate and temperature with high accuracy.

Install these transmitters between two flanges in a flanged pipe system to measure flow rate and send the data to a remote display or programmable logic controller (PLC). For easy cleaning and maintenance, you can slide the transmitter out from between the flanges.

Thread a ring fitting into your pipe connection and insert the probe of these transmitters to measure the flow and temperature of water, oil, or air.

Measure and transmit flow rate, pressure, and temperature of industrial gases, such as air, argon, CO2, and nitrogen, flowing through your system.

These switches have a low-profile design to fit in water pipelines with limited clearance.

For monitoring flow at a glance, these switches have a plastic window with a rotor indicator that spins when there’s flow.

Activate or deactivate equipment when your flow rate reaches a set point.

Accurate even in applications where pressure fluctuates regularly, these flow switches split flow into two paths and measure their difference in pressure drop to calculate the flow rate of liquid.

UL listed for use where flammable gases or combustible dusts may be present, these flow switches activate or deactivate equipment when your flow rate reaches a set point.

Easy to install, these flow switches come already set to a specific set point and don’t require you to disassemble your pipeline.