Filter by
Boom Adjustability
Weight Capacity
Export Control Classification Number (ECCN)
DFARS Specialty Metals
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Length Adjustment Mechanism
Forklift Booms
 |
Shown Installed on Forklift |
Slide these booms onto forklift forks to handle long, cumbersome loads. They secure to the forklift carriage with the included safety chains. These booms are labeled with capacity for each hook position. First hook position is measured from the fork pocket end.
Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.
Warning: Never use to lift people or items over people.
Forklift Booms
 |
Style D |
Vertically-Adjustable Boom—Those that also adjust vertically move in and out and up and down for the most flexible load placement. To access tall loads, raise the hook position and lock the boom into place with the pin.
Horizontally-Telescoping Boom—Horizontally telescoping booms extend and retract lengthwise to handle extra-long loads and reach into hard-to-access areas.
Wt. Cap., lb. | For Max. Fork | Hook | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | @ 3 ft. | @ 4 ft. | @ 5 ft. | @ 6 ft. | @ 7 ft. | @ 8 ft. | @ 9 ft. | @ 10 ft. | @ 11 ft. | @ 12 ft. | Fork Pocket Spacing Ctr.-to-Ctr. | For Min. Fork Lg. | Wd. | Ht. | Material | Type | Movement | Opening Wd. | First Hook Position, ft. | Lg., ft. | Each | |||
Horizontally Telescoping, Vertically Adjustable (37° Maximum Lifting Angle) | ||||||||||||||||||||||||
| D | 4,000 | 3,700 | 3,500 | 3,200 | 3,000 | 2,700 | 2,500 | 2,200 | 2,000 | 1,700 | 24" | 24" | 7 1/2" | 2 1/2" | Painted Steel | Latching Grab | Swivel Rigid | 1" 5/8" | 3 | 7 1/2 to 12 1/2 | 3638T116 | 000000000 | ||
| D | 6,000 | 5,000 | 4,500 | 4,000 | 3,500 | 3,000 | 2,600 | 2,300 | 2,000 | 1,800 | 24" | 24" | 7 1/4" | 2 1/4" | Painted Steel | Latching Latching | Swivel Swivel | 1" 1" | 3 | 7 1/2 to 12 1/2 | 3638T117 | 00000000 | ||
| D | 8,000 | 6,600 | 6,000 | 5,300 | 4,600 | 4,000 | 3,500 | 3,000 | 2,600 | 2,200 | 24" | 24" | 7 1/4" | 2 1/4" | Painted Steel | Latching Latching | Swivel Swivel | 1" 1 1/4" | 3 | 7 to 12 1/2 | 3638T118 | 00000000 | ||
 |
A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.
Wt. Cap., lb. | Thk. | Pin Dia. | Opening Wd. | Inside Lg. | Inside Wd. | Specs. Met | Mil. Spec. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Galvanized Steel | |||||||||||
| 4,400 | 1/2" | 21/32" | 13/16" | 1 29/32" | 1 5/16" | ASME B30.26 | Fed. Spec. RR-C-271 | 3555T51 | 000000 | ||
| 7,100 | 5/8" | 25/32" | 1 1/16" | 2 13/32" | 1 23/32" | ASME B30.26 | Fed. Spec. RR-C-271 | 3555T52 | 00000 | ||
| 10,400 | 3/4" | 29/32" | 1 1/4" | 2 13/16" | 2" | ASME B30.26 | Fed. Spec. RR-C-271 | 3555T53 | 00000 | ||
 |
Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.
Note: Capacities are for vertical lifting only.
Forklift Booms—Made in the U.S.
 |  |  |
Style H | Replacement Pin Housing Rebuild Kits | Replacement Pull Pins |
Forklift Booms | Replacement Pin Housing Rebuild Kits | Replacement Pull Pins | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wt. Cap., lb. | For Max. Fork | Hook | ||||||||||||||||||||||||||
Style | @ 3 ft. | @ 4 ft. | @ 5 ft. | @ 6 ft. | @ 7 ft. | @ 8 ft. | @ 9 ft. | @ 10 ft. | @ 11 ft. | @ 12 ft. | Fork Pocket Spacing Ctr.-to-Ctr. | For Min. Fork Lg. | Wd. | Ht. | Material | Type | Movement | Opening Wd. | First Hook Position, ft. | Lg., ft. | Each | Each | Each | |||||
Horizontally Telescoping, Vertically Adjustable (40° Maximum Lifting Angle) | ||||||||||||||||||||||||||||
| H | 4,000 | 4,000 | 4,000 | 4,000 | 3,200 | 2,600 | 2,200 | 1,900 | 1,600 | 1,500 | 15" | 30" | 7 1/2" | 2 1/2" | Painted Steel | Latching | Swivel | 1 1/16" | 3 | 7 to 12 | 3638T25 | 000000000 | 3638T42 | 0000000 | 3638T43 | 0000000 | ||
| H | 6,000 | 6,000 | 6,000 | 6,000 | 5,000 | 4,200 | 3,500 | 3,000 | 2,700 | 2,500 | 15" | 30" | 7 1/2" | 2 1/2" | Painted Steel | Latching | Swivel | 1 5/16" | 3 | 7 to 12 | 3638T32 | 00000000 | 3638T42 | 000000 | 3638T43 | 000000 | ||
| H | 8,000 | 8,000 | 8,000 | 8,000 | 7,000 | 5,700 | 4,800 | 4,100 | 3,600 | 3,100 | 15" | 30" | 7 1/2" | 2 1/2" | Painted Steel | Latching | Swivel | 1 9/16" | 3 | 7 to 12 | 3638T33 | 00000000 | 3638T42 | 000000 | 3638T43 | 000000 | ||
|
A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.
|
Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.
Note: Capacities are for vertical lifting only.
