Connect T‐slotted rails and reinforce joints for structural stability.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Route wires, cables, and tubing along T‐slotted rails.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

This welded, one-piece strut channel combines two strut channels back-to-back.

Create continuous runs of channel without corners.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

Serrated grooves grip the lip of the channel.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Keep a rod securely centered against the strut channel.

Brackets mount on the outside of strut channel to allow trolley movement.

Keep hardware centered in the strut channel slot.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Securely fasten strut channel to the floor.

Push these nuts into place rather than threading them onto a fastener.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Provide smooth motion between two pieces of strut channel.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Create posts of varying lengths.

Also known as angle brackets.

A rubber seal protects against moisture around the installation hole.

Clamp these brackets to panel edges to quickly assemble crates.

Connect wood 2×4s to posts and other flat surfaces.

Interlock brackets to secure panels flush to flat surfaces.

Often used in washrooms, these brackets mount panels and partitions.

These brackets come in one piece that can be cut-to-size with a hacksaw.

Design your own partitions, add to your existing partition, or replace individual components and hardware.

These kits include all brackets and fasteners needed for mounting partitions.