Screw and nut sets or nuts secure brackets and other accessories to rails.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Run wires through the hollow stud of these nuts or use them as vents.

Keep a rod securely centered against the strut channel.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Keep hardware centered in the strut channel slot.

Use with hex nuts to connect threaded rod.

Build structures that stand up to more vibration and movement than T-slotted framing but with the same versatility and installation ease. Instead of T-shaped slots, these rails have slots that turn up and inward to keep connections rigidly aligned together.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Build lightweight structures, such as light duty machine guards, enclosures, and carts, with framing that is two-thirds the weight of aluminum framing.

An offset barrel allows you to position threads near edges and corners.

To protect their threads from deforming, these stainless steel nuts have a projection that concentrates your weld and creates room for heat to dissipate. An offset barrel lets you position threads near the edges and corners of stainless steel sheets.

Slim at the base, these weld nuts fit in channels and other spaces too tight for round-base weld nuts. Weld them to stainless steel surfaces to add strong, permanent threads that resist corroding from chemicals.

Projections on the base of these steel nuts concentrate your weld and create room for heat to dissipate, protecting threads from deforming. Weld them to uncoated steel channels and other tight spaces where round-base weld nuts won't fit.

Projections on the base of these nuts concentrate your weld and create room for heat to dissipate, protecting threads from deformation. Made of 18-8 stainless steel, these nuts withstand mild chemicals and can be used in wet and outdoor environments.

With a slim base and a short barrel, these corrosion-resistant weld nuts fit in tight spaces and in low-clearance areas.

Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these weld nuts from deforming. Made of 18-8 stainless steel, they withstand mild chemicals and can be used in wet and outdoor environments.

Install strong, permanent threads in sheet metal to create a 90° joint.

A drill point powers through metal up to 0.105" thick.

Attach drywall to metal studs up to 0.036" thick.

Power through drywall and into metal studs up to 0.105" thick.

These screws have a head that's one-third smaller than other drywall screws. Use them to attach drywall to metal studs up to 0.036" thick.

Hang drywall to wood framing. These screws have a sharp point that penetrates drywall and a curved neck that sinks in without tearing the paper surface.

Made from stainless steel to resist galvanic corrosion, use these screws to fasten aluminum to aluminum and steel framing. They save you time and effort by drilling their own holes and fastening in a single operation.

These nailers fit in the palm of your hand and can be used in any position.

For less frequent reloading and increased productivity, these nailers hold more than twice as many nails as standard framing nailers.