Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Fill cracks up to 10" deep on vertical and overhead surfaces.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

Slide these tools along the perimeter of poured concrete slabs to create a rounded edge for a finished appearance that resists chipping.

Also known as mortar hoes, the blade on these tools has holes to allow concrete to pass through as you mix.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Push and pull freshly-poured concrete.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.

Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.

Mark traffic lanes, parking lots, and factory floors.

Enhance, renew, and protect surfaces.

Make your surface magnetic with this paint.

Make items stand out under emergency lighting or in low-light environments.

Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.

Stiff natural fibers are secured to a wood block to apply thick roof coatings and patches.

Tiny spikes covering these rollers release trapped gas when rolled over thick self-leveling floor coatings to promote adhesion and aid in the self-leveling process.

Use rollers to apply sealants and coatings to concrete and asphalt.

Adjust the height of the metal blade to get a consistent application thickness for water- and solvent-based floor coatings. Their metal blades can handle tough coatings, such as concrete and harsh solvents. Applicators are also known as gauge rakes.