About Calculating the Airflow Required for Air Cleaning
More
Wall-Mount Fume Exhausters
Remove fumes, vapors, and fine dust particles from your space. This exhauster is commonly used in welding, soldering, and other operations that create fumes. It has an open dripproof motor enclosure for relatively clean, dry, indoor locations.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Overall | Mounting | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Airflow @ Static Pressure | Volume | Power, hp | Inlet Dia. | Outlet Dia. | Ht. | Wd. | Dp. | Housing Material | Base Material | Wheel Material | Fasteners Included | For Screw Size | Hole Dia. | Number of Holes | Each | |
120V AC—Hardwire | ||||||||||||||||
300 cfm @ 1/2 in. of H₂O | 61 dBC @ 15 ft. | 1/4 | 4" | 4" | 16" | 16" | 8 7/8" | Galvanized Steel | Steel | Steel | No | 1/4" | 9/32" | 4 | 000000 | 0000000 |
Portable Fume Exhausters
In addition to using the handle to carry these exhausters, you can mount them to a wall, bench, or floor. They remove fumes, vapors, and fine dust particles from your space. They are commonly used in welding, soldering, and other operations that create fumes. All have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments. They have a flexible hose with nozzle to capture fumes at the source and rubber pads on the base to reduce vibration.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Single-duct kits (sold separately) include a hose, a nozzle, and two clamps to replace existing components.
Double-duct kits (sold separately) create two points for fume collection, although each will have lower airflow than the one collection point of a single-duct kit. These kits include two hoses, two nozzles, four clamps, and a wye connector.
Overall | Nozzle | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Airflow @ Static Pressure | Volume | Power, hp | Inlet Dia. | Outlet Dia. | Ht. | Wd. | Dp. | Ht. | Wd. | Housing Material | Fasteners Included | For Screw Size | Hole Dia. | Number of Holes | Each | |
120V AC, Single Phase—Plug | ||||||||||||||||
280 cfm @ 1 1/2 in. of H₂O 330 cfm @ 1/4 in. of H₂O 345 cfm @ 0 in. of H₂O | 62 dBA @ 15 ft. | 1/2 | 4" | 4" | 18 3/4" | 17 1/2" | 16" | 4" | 8" | Steel | No | 3/8" | 7/16" | 4 | 0000000 | 000000000 |
310 cfm @ 1/4 in. of H₂O 335 cfm @ 0 in. of H₂O | 59 dBA @ 15 ft. | 1/4 | 6" | 6" | 17 7/8" | 13 3/4" | 18 1/4" | 8" | 8" | Aluminum | No | 3/8" | 7/16" | 4 | 0000000 | 00000000 |
575 cfm @ 1 1/2 in. of H₂O 655 cfm @ 1/4 in. of H₂O 670 cfm @ 0 in. of H₂O | 59 dBA @ 15 ft. | 1 | 6" | 6" | 17 7/8" | 13 3/4" | 18 1/4" | 8" | 8" | Aluminum | No | 3/8" | 7/16" | 4 | 0000000 | 00000000 |
120/230V AC, Single Phase—Hardwire | ||||||||||||||||
730 cfm @ 1 1/2 in. of H₂O 795 cfm @ 1/4 in. of H₂O 810 cfm @ 0 in. of H₂O | 73 dBA @ 15 ft. | 1 1/2 | 6" | 6" | 21 3/8" | 21 1/2" | 16 1/2" | 8" | 8" | Steel | No | 3/8" | 7/16" | 4 | 0000000 | 00000000 |
230/460V AC, Three Phase—Hardwire | ||||||||||||||||
280 cfm @ 1 1/2 in. of H₂O 330 cfm @ 1/4 in. of H₂O 345 cfm @ 0 in. of H₂O | 62 dBA @ 15 ft. | 1/2 | 4" | 4" | 18 3/4" | 17 1/2" | 16" | 4" | 8" | Steel | No | 3/8" | 7/16" | 4 | 0000000 | 00000000 |
575 cfm @ 1 1/2 in. of H₂O 655 cfm @ 1/4 in. of H₂O 670 cfm @ 0 in. of H₂O | 59 dBA @ 15 ft. | 1 | 6" | 6" | 17 7/8" | 13 3/4" | 18 1/4" | 8" | 8" | Aluminum | No | 3/8" | 7/16" | 4 | 0000000 | 00000000 |
730 cfm @ 1 1/2 in. of H₂O 795 cfm @ 1/4 in. of H₂O 810 cfm @ 0 in. of H₂O | 73 dBA @ 15 ft. | 1 1/2 | 6" | 6" | 21 3/8" | 21 1/2" | 16 1/2" | 8" | 8" | Steel | No | 3/8" | 7/16" | 4 | 0000000 | 00000000 |
Suspended-Hood Fume Exhausters
Position these exhausters above drums, tanks, and distillers to remove fumes, vapors, and fine dust particles from your space. All include a pulley system to adjust the hood height. Add an optional swivel wall bracket (sold separately) for side-to-side movement.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Exhausters | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Hose | Optional Swivel Wall Bracket | ||||||||||
Hood Dia. | Airflow @ Static Pressure | Volume | Power, hp | ID | Lg., ft. | Mounting Location | Includes | Each | Each | ||
120V AC—Plug | |||||||||||
27" | 500 cfm @ 0 in. of H 2 O | 60 dB @ 5 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 0000000 | 00000000 | 0000000 |
32" | 500 cfm @ 0 in. of H 2 O | 60 dB @ 5 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 00000000 | 00000000 | 000000 |
37" | 500 cfm @ 0 in. of H 2 O | 60 dB @ 5 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 00000000 | 00000000 | 000000 |
44" | 500 cfm @ 0 in. of H 2 O | 60 dB @ 5 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 00000000 | 00000000 | 000000 |
Positionable-Arm Fume Exhaust Hoses
Move the hose into position and the support arm will hold it in place. These hoses remove fumes, vapors, and fine dust particles from your space. They are commonly used in welding, soldering, and other operations that create fumes.
Hose | Nozzle | Mounting | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ID | Lg., ft. | Material | Dia. | Material | Fasteners Included | For Screw Size | Hole Dia. | Number of Holes | Includes | Each | |
Ceiling and Wall Mount | |||||||||||
4" | 5 | PVC Plastic | 10" | Steel | No | 3/8" | 1/2" | 4 | Hose, Mounting Bracket, Nozzle | 0000000 | 000000000 |
4" | 7 | PVC Plastic | 10" | Steel | No | 3/8" | 1/2" | 4 | Hose, Mounting Bracket, Nozzle | 0000000 | 00000000 |
4" | 8.5 | PVC Plastic | 10" | Steel | No | 3/8" | 1/2" | 4 | Hose, Mounting Bracket, Nozzle | 0000000 | 00000000 |
6" | 7 | PVC Plastic | 13" | Steel | No | 3/8" | 1/2" | 6 | Hose, Mounting Bracket, Nozzle | 0000000 | 00000000 |
6" | 10 | PVC Plastic | 13" | Steel | No | 3/8" | 1/2" | 6 | Hose, Mounting Bracket, Nozzle | 0000000 | 00000000 |
8" | 10 | PVC Plastic | 14" | Steel | No | 3/8" | 1/2" | 8 | Hose, Mounting Bracket, Nozzle | 0000000 | 00000000 |
Wall-Mount Hazardous Location Fume Exhausters
This fume exhauster has a motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G locations. Use it to remove fumes, vapors, and fine dust particles from your space. It is commonly used in welding, soldering, and other operations that create fumes.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
O'all | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Airflow @ Static Pressure | Volume | Power, hp | Inlet Dia. | Outlet Dia. | Ht. | Wd. | Dp. | Housing Material | Base Material | Wheel Material | Fasteners Included | Hole Diameter | Environmental Rating | Each | |
120V AC—Hardwire | |||||||||||||||
300 cfm @ 1/2 in. of H₂O | 61 dBC @ 15 ft. | 1/4 | 4" | 4" | 16" | 17 5/8" | 8 7/8" | Galvanized Steel | Steel | Aluminum | No | 9/32" | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G | 000000 | 000000000 |
Suspended-Hood Hazardous Location Fume Exhausters
Position these exhausters above drums, tanks, and distillers to remove fumes, vapors, and fine dust particles from your space. All have a motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups F and G locations. Exhausters include a pulley system to adjust the hood height. Add an optional swivel wall bracket (sold separately) for side-to-side movement.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Exhausters | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Hose | Optional Swivel Wall Bracket | |||||||||||
Hood Dia. | Airflow @ Static Pressure | Volume | Power, hp | ID | Lg., ft. | Mounting Location | Includes | Environmental Rating | Each | Each | ||
120/230V AC—Hardwire | ||||||||||||
27" | 450 cfm @ 0 in. of H 2 O | 69 dB @ 5 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G IP54 | 00000000 | 000000000 | 00000000 | 0000000 |
32" | 450 cfm @ 0 in. of H 2 O | 69 dB @ 5 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G IP54 | 00000000 | 00000000 | 00000000 | 000000 |
37" | 450 cfm @ 0 in. of H 2 O | 69 dB @ 5 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G IP54 | 00000000 | 00000000 | 00000000 | 000000 |
44" | 450 cfm @ 0 in. of H 2 O | 69 dB @ 5 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G IP54 | 00000000 | 00000000 | 00000000 | 000000 |