How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About On/Off Valves
More
Threaded On/Off Valves with Garden Hose Outlet
- Valve Type: Ball
- For Use With:
Brass Body: Water, Air, Helium, Butane, Ethanol, Ethylene Glycol, Gasoline, Kerosene, Mineral Spirits, Natural Gas, Propane, Soap Solutions, Methanol
Nickel-Plated Brass Body: Water, Air, Helium, Butane, Ethanol, Ethylene Glycol, Gasoline, Kerosene, Mineral Spirits, Natural Gas, Propane, Soap Solutions, Isopropyl Alcohol
Turn the flow to any garden hose on and off. These valves have garden hose threads, which are a standard size, so they're universally compatible with all standard garden hoses. They do not restrict flow when open—they’re full port.
Nickel-plated brass valves stand up to corrosion better than plain brass valves. They have a fluoroelastomer seal that withstands chemicals and temperature fluctuations, making them a good choice for lines flushed with hot fluids or cleaners.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size  | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Handle Material | Seal Material | End-to-End Lg. | Each | |
Brass Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Female Inlet × GHT Male Outlet | |||||||||
| 3/4 | 3/4 | 8.7 | 125 psi @ 72° F | 0° to 180° | Zinc | Buna-N Rubber | 1 7/8" | 00000000 | 000000 |
GHT Female Inlet × GHT Male Outlet | |||||||||
| __ | 3/4 | 8.7 | 125 psi @ 72° F | 0° to 180° | Zinc | Buna-N Rubber | 1 7/8" | 00000000 | 00000 |
Nickel-Plated Brass Body | |||||||||
NPT Female Inlet × GHT Male Outlet | |||||||||
| 3/4 | 3/4 | 8.7 | 125 psi @ 72° F | 0° to 180° | Zinc | Viton® Fluoroelastomer | 1 7/8" | 00000000 | 00000 |
GHT Female Inlet × GHT Male Outlet | |||||||||
| __ | 3/4 | 8.7 | 125 psi @ 72° F | 0° to 180° | Zinc | Viton® Fluoroelastomer | 1 7/8" | 00000000 | 00000 |
Plastic Threaded On/Off Valves with Garden Hose Threads
- Valve Type: Ball
- For Use With: Air, Water
- Seat Material:
NPT Male × GHT Male: Buna-N Rubber
Socket Female × GHT Male: Buna-N Rubber
All Other Valves: PTFE Plastic
Control flow through any garden hose—the threads on these valves are universally compatible with garden hose connections. Made of PVC, they’re a lightweight and corrosion resistant alternative to metal valves. A Buna-N rubber seal gives them good resistance to water and oil. The threaded connections on these valves let you take apart and reassemble your setup as needed for maintenance.
Valves with a barbed inlet make quick connections to unthreaded hose and tubing.
Valves with a socket-connect inlet bond to unthreaded pipe with primer and cement (both not included) to create a permanent, leak-tight connection. The connection is stronger than that of threaded or barbed connections.
Full-port valves have a wider bore than standard-port valves, so they won’t restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Light Gray PVC Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/4 | 3/4 | Not Rated | 125 psi @ 72° F | 35° to 140° | Full | 2 15/16" | 0000000 | 000000 |
| Pipe Size | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Light Gray PVC Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/4 | 3/4 | Not Rated | 125 psi @ 72° F | 35° to 140° | Full | 2 15/16" | 0000000 | 000000 |
| Pipe Size | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Light Gray PVC Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/4 | 3/4 | 8 | 125 psi @ 72° F | 35° to 140° | Standard | 2 1/16" | 0000000 | 00000 |
| Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Light Gray PVC Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
| 3/4 | 12.3 | 125 psi @ 72° F | 35° to 140° | Full | 2 15/16" | 0000000 | 000000 |
| Hose Size | For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Light Gray PVC Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/4 | 3/8" | 15.6 | 125 psi @ 72° F | 35° to 140° | Full | 2 7/8" | 00000000 | 000000 |
Threaded On/Off Valves with Garden Hose Outlet for Drinking Water
- Valve Type: Ball
- For Use With: Drinking Water
- Seal Material: PTFE Plastic
- Specifications Met: NSF/ANSI 61
Certified to meet NSF/ANSI 61, these valves control the flow of drinking water. With universally compatible threads, they’ll connect to any garden hose or garden hose fittings. The included hose cap protects them from dirt and debris.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Features | Each | |
Bronze Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Female × GHT Male | |||||||||
| 1/2 | 3/4 | 27 | 400 psi @ 400° F | -40° to 400° | Full | 2 5/8" | Hose Cap | 00000000 | 000000 |
| 3/4 | 3/4 | 50 | 400 psi @ 400° F | -40° to 400° | Full | 2 15/16" | Hose Cap | 00000000 | 00000 |
| 1 | 3/4 | 43 | 600 psi @ 100° F | -20° to 200° | Standard | 4 3/16" | Hose Cap | 000000000 | 000000 |
On/Off Valves with Press-Connect Fittings for Drinking Water
For a permanent, leak-tight connection that doesn’t require heat or soldering, these valves have press-connect fittings that crimp to metal tubing. Install them with a press-connect crimping tool (sold separately). These valves meet NSF/ANSI 61 for use in drinking water systems. All are full port, so they do not restrict flow.
Bronze valves are stronger and more durable than brass valves.
Valves with GHT threads are compatible with all standard garden hoses and fittings. They come with a hose cap to keep dirt from entering the valve; it’s attached with a chain to keep it from getting lost when not in use.
Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Drinking Water
- Seal Material: EPDM Rubber
- Tubing: Use with K, M, L copper
- Specifications Met: NSF/ANSI 61
| Copper Tube Size | For Tube OD | Hose Size | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Features | Each | |
Brass Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 5/8" | 3/4 | 200 psi @ 250° F | -20° to 250° | 27 | 3 1/8" | Hose Cap and Chain | 00000000 | 000000 |
| 3/4 | 7/8" | 3/4 | 200 psi @ 250° F | -20° to 250° | 27 | 3 1/2" | Hose Cap and Chain | 00000000 | 000000 |
Bronze Body | |||||||||
| 1/2 | 5/8" | 3/4 | 200 psi @ 250° F | -20° to 250° | 27 | 3 5/8" | Hose Cap and Chain | 00000000 | 000000 |
| 3/4 | 7/8" | 3/4 | 200 psi @ 250° F | -20° to 250° | 27 | 4 1/4" | Hose Cap and Chain | 00000000 | 000000 |
On/Off Valves with Solder-Connect Fittings for Drinking Water
Solder these valves to metal tubing for a permanent, leak-tight connection. They meet NSF/ANSI 61 for use with drinking water. All are full port, so they do not restrict flow.
Tee valves can be installed in your line to drain or fill your system without disassembling connections or additional fittings. They help minimize leak points.
Bronze valves are stronger and more durable than brass valves for a longer life.
Valves with GHT threads are compatible with any garden hose and fittings. They come in one standard size. All include a cap to protect against dirt and debris. It’s connected to the valve to keep it from getting lost when the valve is in use.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Drinking Water
- Seal Material: PTFE Plastic
- Specifications Met: NSF/ANSI 61
- Valve Type: Ball
- For Use With: Drinking Water
- Seal Material: EPDM Rubber
- Specifications Met: NSF/ANSI 61
Threaded On/Off Valves with Garden Hose Outlet for Chemicals
- Valve Type: Ball
- For Use With: Air, Carbon Dioxide, Chlorinated Water, Deionized Water, Dry Material, Ethylene Glycol, Phosphoric Acid, Salt Water, Soap Solutions, Water
- Ball Material: PVC Plastic
- Seal Material: Viton® Fluoroelastomer Rubber
- Inlet Seat Material: Santoprene Rubber
- Outlet Seat Material: PTFE Plastic
Control the flow of chemical solutions from any garden hose. With a fluoroelastomer seal and polypropylene body, these valves withstand strong chemicals, such as chlorinated water and phosphoric acid. This makes them a great choice for lines used to spray greasy floors with cleaning solutions or to spread fertilizer. These valves have garden hose threads, which are a standard size, so they’re compatible with all standard garden hoses. When open, these valves don’t restrict the flow—they’re full port.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
On/Off Valves with Garden Hose Threads
Start and stop the flow of water through your garden hose.
Plastic valves are lighter in weight than metal valves, but they’re typically not as durable. Zinc valves are stronger and more resistant to wear and tear than plastic valves. Brass valves are stronger and resist corrosion better than plastic, zinc, and aluminum valves. Aluminum valves resist the highest pressures. TPR-coated valves stay safe to touch because they won’t get too hot in the summer or too cold in the winter.
Valves with a toggle switch are easy to use one-handed because you can flip the water on or off with just your thumb. Valves with a contoured lever handle are easy to grip, even if they're wet, oily, or you're wearing gloves.
Add kink absorbers to eliminate sharp bends between your hose and your valve, maximizing flow and preventing damage.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Water
- Temperature Range: 35° to 100° F
| Handle Type | Flow Coefficient (Cv) | Max. Pressure | End-to-End Lg. | Body Finish | Includes | Each | |
Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
| T-Handle | 20.5 | 60 psi @ 100° F | 3" | __ | Washers | 0000000 | 00000 |
| Toggle Switch | 1.3 | 60 psi @ 72° F | 4 5/16" | TPR Coated | Washers | 00000000 | 00000 |
| Contoured Lever Handle | 41.6 | 60 psi @ 100° F | 6 7/8" | TPR Coated | Washers, Flexible Kink Absorbers | 00000000 | 00000 |
Zinc Body | |||||||
| Lever Handle | Not Rated | 120 psi @ 60° F | 1 11/16" | __ | Washers | 0000000 | 0000 |
| T-Handle | 13.1 | 120 psi @ 60° F | 3 1/4" | TPR Coated | Washers | 00000000 | 0000 |
| T-Handle | 41.6 | 60 psi @ 100° F | 3 7/16" | __ | Washers | 00000000 | 00000 |
Brass Body | |||||||
| Lever Handle | 18.1 | 60 psi @ 100° F | 1 13/16" | __ | Washers | 0000000 | 00000 |
Aluminum Body | |||||||
| Lever Handle | 4.9 | 400 psi @ 60° F | 1 3/4" | TPR Coated | Washers | 00000000 | 00000 |
Hose | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. Pressure | Lg. | Fitting Material | Material | Color | Outer Coil Material | Washer Material | Each | |
| 120 psi @ 72° F | 5 49/64" | Zinc | PVC Plastic | Green | Steel | TPR Rubber | 0000000 | 00000 |
Swivel On/Off Valves with Garden Hose Threads
- Valve Type: Ball
- For Use With: Water
- Temperature Range: 35° to 120° F
Keep fluids flowing—these valves twist and turn to prevent your hose from kinking. They connect to your faucet and swivel 360°, which makes it less likely your hose will kink when you move it side to side. Their lever handle is easy to turn, and lets you know if the valve is open or closed at a glance.
Zinc valves have good corrosion resistance. A plastic coating protects your hands by keeping the valve’s surface from getting too hot or cold.
Brass valves are more durable and corrosion resistant than zinc valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Add a kink absorber for additional protection to your hose. Connected between the valve and the hose, they prevent kinking from sharp up and down movements.
For technical drawings and 3-D models, click on a part number.
Wye-Shaped On/Off Valves with Garden Hose Threads
Convert one faucet into two, four, or five outlets.
All valves have shut-off outlets, so you can start and stop the flow to outlets individually. You can also use the shut-off to release pressure or drain residual water after disconnecting hose. Some valves also have open-flow outlets in addition to shut-off outlets. Open-flow outlets don't give you any flow control—they work like standard outlets.
Plastic valves are lighter in weight than metal valves, but they’re not as durable. Zinc valves are stronger and more resistant to wear and tear than plastic valves. Brass valves are stronger than plastic, zinc, and aluminum valves. Aluminum valves resist the highest pressures.
Contoured lever handles give you a better grip—choose them if you’ll be wearing gloves often or if they’re in an area where they’ll get wet and slippery. Toggle-switch handles easily flick on and off like a light switch.
Valves with TPR coating protect your hands by keeping the valve’s surface from getting too hot or cold.
Valves with a support brace can be secured against a wall for extra stability.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Water
- Temperature Range: 35° to 100° F
Valves with a flexible kink absorber protect your hose from sharp bends at the outlet that reduce flow and damage the hose.
| Handle Style | No. of Shut-Off Outlets | No. of Open-Flow Outlets | Flow Coefficient (Cv) | Max. Pressure | End-to-End Lg. | Body Finish | Includes | Each | |
Plastic Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lever Handle | 2 | 0 | 27 | 60 psi @ 72° F | 3 3/8" | __ | Washers, Flexible Kink Absorbers | 0000000 | 00000 |
| Contoured Lever Handle | 2 | 0 | 14.1 | 60 psi @ 72° F | 3 7/8" | TPR Coated | Washers | 0000000 | 00000 |
| Contoured Lever Handle | 2 | 0 | 15.8 | 60 psi @ 72° F | 6" | TPR Coated | Washers, Flexible Kink Absorbers | 0000000 | 00000 |
| T-Handle | 2 | 0 | Not Rated | Not Rated | 4 3/4" | __ | Washers | 0000000 | 0000 |
| Toggle Switch | 2 | 0 | 1.3 | 60 psi @ 72° F | 4 1/8" | TPR Coated | Washers | 0000000 | 00000 |
Zinc Body | |||||||||
| Lever Handle | 2 | 0 | Not Rated | 120 psi @ 72° F | 3 3/4" | TPR Coated | Washers | 0000000 | 00000 |
| Lever Handle | 2 | 0 | Not Rated | 120 psi @ 72° F | 6 11/16" | TPR Coated | Washers, Flexible Kink Absorbers | 0000000 | 00000 |
| Lever Handle | 2 | 0 | 29.2 | 60 psi @ 72° F | 3 3/8" | __ | Washers | 0000000 | 0000 |
| T-Handle | 2 | 0 | 6.5 | 60 psi @ 72° F | 4 3/4" | __ | Washers | 0000000 | 00000 |
Brass Body | |||||||||
| Lever Handle | 2 | 0 | 31.3 | 60 psi @ 72° F | 2 5/8" | __ | Washers | 0000000 | 00000 |
| Lever Handle | 2 | 0 | 44.7 | 60 psi @ 72° F | 3 5/16" | __ | Washers | 0000000 | 00000 |
Aluminum Body | |||||||||
| Lever Handle | 2 | 0 | 4.5 | 445 psi @ 72° F | 2 5/8" | __ | Washers | 0000000 | 00000 |
- Valve Type: Ball
- For Use With: Water
- Temperature Range: 35° to 100° F
| Handle Style | No. of Shut-Off Outlets | No. of Open-Flow Outlets | Flow Coefficient (Cv) | Max. Pressure | End-to-End Lg. | Body Finish | Includes | Each | |
Plastic Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Toggle Switch | 4 | 0 | 1.3 | 60 psi @ 72° F | 5 5/16" | TPR Coated | Washers | 0000000 | 000000 |
Zinc Body | |||||||||
| Lever Handle | 4 | 0 | Not Rated | 120 psi @ 72° F | 4 1/2" | TPR Coated | Washers, Support Brace | 0000000 | 00000 |
Brass Body | |||||||||
| Lever Handle | 4 | 0 | 41.6 | 60 psi @ 72° F | 3 5/16" | __ | Washers | 0000000 | 00000 |
| Lever Handle | 4 | 0 | 46.8 | 60 psi @ 72° F | 4 11/16" | __ | Washers | 0000000 | 00000 |
Aluminum Body | |||||||||
| Lever Handle | 4 | 0 | 4.6 | 415 psi @ 72° F | 3 1/8" | __ | Washers | 0000000 | 00000 |
- Valve Type: Ball
- For Use With: Water
- Temperature Range: 35° to 100° F
| Handle Style | No. of Shut-Off Outlets | No. of Open-Flow Outlets | Flow Coefficient (Cv) | Max. Pressure | End-to-End Lg. | Body Finish | Includes | Each | |
Plastic Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lever Handle | 3 | 2 | Not Rated | 120 psi @ 72° F | 3 5/16" | __ | Washers, Support Brace, Mounting Hardware | 0000000 | 00000 |
| T-Handle | 4 | 1 | 6.6 | 60 psi @ 72° F | 5" | __ | Washers | 0000000 | 00000 |
Zinc Body | |||||||||
| Lever Handle | 5 | 0 | Not Rated | 120 psi @ 72° F | 3 5/16" | TPR Coated | Washers, Support Brace, Mounting Hardware | 0000000 | 00000 |
| T-Handle | 4 | 1 | 6.6 | 60 psi @ 72° F | 5" | __ | Washers | 0000000 | 00000 |
Flexible kink absorbers protect your hose from sharp bends at the outlet that reduce flow and damage the hose.
Hose | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. Pressure | Lg. | Fitting Material | Material | Color | Outer Coil Material | Washer Material | Each | |
| 120 psi @ 72° F | 5 49/64" | Zinc | PVC Plastic | Green | Steel | TPR Rubber | 0000000 | 00000 |