McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    224 Products

    Hammer-Driven Hole Punches

    Image of Product. Front orientation. Hole Punches. Hammer-Driven Hole Punches.
    Strengthened edges cut holes in soft metal. These punches are also known as arch punches.
    For Hole
    Dia.
    Lg.
    Material
    Each
    For Brass, Copper, Fabric, Leather, Rubber
     
    Round
    3/16"4 1/2"Steel3427A57000000
    1/4"4 1/2"Steel3427A1100000
    5/16"4 1/2"Steel3427A1200000
    3/8"4 5/8"Steel3427A1300000
    7/16"4 3/4"Steel3427A1400000
    1/2"4 7/8"Steel3427A1500000
    9/16"4 7/8"Steel3427A1600000
    5/8"5"Steel3427A1700000
    11/16"5"Steel3427A1800000
    3/4"5 1/8"Steel3427A1900000
    13/16"5 1/8"Steel3427A2100000
    7/8"5 1/4"Steel3427A2200000
    15/16"5 1/4"Steel3427A2300000
    1"5 3/8"Steel3427A2400000
    1 1/16"5 5/8"Steel3427A2500000
    1 1/8"5 5/8"Steel3427A2600000
    1 3/16"5 5/8"Steel3427A2700000
    1 1/4"5 3/4"Steel3427A2800000
    1 5/16"5 3/4"Steel3427A2900000
    1 3/8"5 7/8"Steel3427A3100000
    1 7/16"5 7/8"Steel3427A32000000
    1 1/2"6"Steel3427A33000000
    1 5/8"6 1/4"Steel3427A34000000
    1 3/4"6 3/8"Steel3427A35000000
    1 7/8"6 7/8"Steel3427A36000000
    2"7"Steel3427A37000000
    2 1/8"7 3/8"Steel3427A38000000
    2 1/4"7 3/8"Steel3427A39000000
    2 3/8"7 3/8"Steel3427A41000000
    2 1/2"6 3/4"Steel3427A42000000
    2 5/8"6 3/4"Steel3427A43000000
    2 3/4"6 3/4"Steel3427A44000000
    2 7/8"6 3/4"Steel3427A45000000
    3"6 3/4"Steel3427A46000000
    3 1/8"6 3/4"Steel3427A47000000
    3 1/4"6 3/4"Steel3427A48000000
    3 3/8"8 1/2"Steel3427A49000000
    3 1/2"8 1/2"Steel3427A51000000
    3 5/8"8 1/2"Steel3427A52000000
    3 3/4"8 1/2"Steel3427A53000000
    3 7/8"8 1/2"Steel3427A54000000
    4"8 1/2"Steel3427A55000000
    2 mm4 1/4"Steel3418A5600000
    3 mm4 3/8"Steel3418A5700000
    4 mm4 3/8"Steel3418A5400000
    5 mm4 3/8"Steel3418A5500000
    6 mm4 1/2"Steel3418A600000
    7 mm4 1/2"Steel3418A700000
    8 mm4 1/2"Steel3418A800000
    9 mm4 3/4"Steel3418A900000
    10 mm4 7/8"Steel3418A100000
    11 mm4 7/8"Steel3418A1100000
    12 mm4 7/8"Steel3418A1200000
    13 mm5 1/2"Steel3418A1300000
    14 mm5 1/2"Steel3418A1400000
    15 mm5 1/2"Steel3418A1500000
    16 mm5 1/2"Steel3418A1600000
    17 mm5 1/2"Steel3418A1700000
    18 mm5 1/2"Steel3418A1800000
    19 mm5 1/2"Steel3418A1900000
    20 mm5 1/2"Steel3418A200000
    21 mm5 3/8"Steel3418A2100000
    22 mm5 1/2"Steel3418A2200000
    23 mm5 1/2"Steel3418A2300000
    24 mm5 1/2"Steel3418A2400000
    25 mm5 7/8"Steel3418A2500000
    26 mm5 7/8"Steel3418A2600000
    27 mm5 3/8"Steel3418A2700000
    28 mm6"Steel3418A2800000
    29 mm5 7/8"Steel3418A2900000
    30 mm5 7/8"Steel3418A3000000
    31 mm5 3/4"Steel3418A31000000
    32 mm6 1/8"Steel3418A32000000
    33 mm6"Steel3418A33000000
    34 mm6"Steel3418A34000000
    35 mm6 1/2"Steel3418A35000000
    36 mm6 3/8"Steel3418A36000000
    37 mm6 3/8"Steel3418A37000000
    38 mm6 5/8"Steel3418A38000000
    39 mm6 5/8"Steel3418A39000000
    40 mm6 1/2"Steel3418A4000000
    41 mm6 3/8"Steel3418A41000000
    42 mm6 3/8"Steel3418A42000000
    43 mm6 3/8"Steel3418A43000000
    44 mm7 1/4"Steel3418A44000000
    45 mm7 1/8"Steel3418A45000000
    46 mm7 1/8"Steel3418A46000000
    47 mm6 3/4"Steel3418A47000000
    48 mm7"Steel3418A48000000
    49 mm6 7/8"Steel3418A49000000
    50 mm7 1/2"Steel3418A5000000
    51 mm7 1/2"Steel3418A51000000
    52 mm7 1/2"Steel3418A52000000
     

    One-Step Hammer-Driven Gasket and Washer Hole Punch Sets

    Image of Product. Front orientation. Hole Punches. One-Step Hammer-Driven Gasket and Washer Hole Punch Sets.
    Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.
    Includes
    For Hole Dia.
    Material
    Container
    Type
    Each
    For Aluminum, Cork, Fabric, Leather, Plastic, Rubber
    10 Punches, Handle1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"SteelPlastic Case33785A510000000
    10 Punches, Handle3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mmSteelPlastic Case33785A52000000
    15 Punches, Handle1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16"SteelPlastic Case33785A11000000
    15 Punches, Handle3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 24 mm, 26 mm, 28 mm, 30 mmSteelPlastic Case33785A14000000
    25 Punches, Handle1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 7/8", 2"SteelPlastic Case33785A12000000
    29 Punches, Handle2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 24 mm, 26 mm, 28 mm, 30 mm, 32 mm, 34 mm, 36 mm, 38 mm, 40 mm, 42 mm, 44 mm, 46 mm, 48 mm, 50 mmSteelPlastic Case33785A15000000
     
    Replacement Punches
    For Hole
    Dia.
    Material
    Each
    1/8"Steel33785A21000000
    3/16"Steel33785A2200000
    1/4"Steel33785A2300000
    5/16"Steel33785A2400000
    3/8"Steel33785A2500000
    7/16"Steel33785A2600000
    1/2"Steel33785A2700000
    9/16"Steel33785A2800000
    5/8"Steel33785A2900000
    3/4"Steel33785A3100000
    7/8"Steel33785A3200000
    1"Steel33785A3300000
    1 1/16"Steel33785A3400000
    1 1/8"Steel33785A3500000
    1 3/16"Steel33785A3600000
    1 1/4"Steel33785A3700000
    1 5/16"Steel33785A3800000
    1 3/8"Steel33785A3900000
    1 7/16"Steel33785A4100000
    1 1/2"Steel33785A4200000
    1 5/8"Steel33785A4300000
    1 11/16"Steel33785A4400000
    1 3/4"Steel33785A4500000
    1 7/8"Steel33785A4600000
    2"Steel33785A4700000
    2 mmSteel33785A17500000
    3 mmSteel33785A11400000
    4 mmSteel33785A15700000
    5 mmSteel33785A18200000
    6 mmSteel33785A5600000
    8 mmSteel33785A5700000
    10 mmSteel33785A5800000
    12 mmSteel33785A5900000
    14 mmSteel33785A6100000
    16 mmSteel33785A6200000
    18 mmSteel33785A6300000
    20 mmSteel33785A6400000
    22 mmSteel33785A33100000
    24 mmSteel33785A34500000
    26 mmSteel33785A50400000
    28 mmSteel33785A54500000
    30 mmSteel33785A55500000
    32 mmSteel33785A63300000
    34 mmSteel33785A68500000
    36 mmSteel33785A68800000
    38 mmSteel33785A70600000
    40 mmSteel33785A7300000
    42 mmSteel33785A80100000
    44 mmSteel33785A81200000
    46 mmSteel33785A9300000
    48 mmSteel33785A94600000
    50 mmSteel33785A95500000

    Hammer-Driven Small Hole Punches

    Image of Product. Front orientation. Hole Punches. Hammer-Driven Small Hole Punches.
    Use these punches to make round holes in soft, nonmetallic materials.
    For Hole
    Dia.
    Lg.
    Material
    Each
    For Fabric, Leather, Rubber
     
    Round
    1/16"3 3/4"Steel3424A57000000
    5/64"3 3/4"Steel3424A3100000
    3/32"3 3/4"Steel3424A1100000
    1/8"3 3/4"Steel3424A1200000
    9/64"3 3/4"Steel3424A1300000
    5/32"3 3/4"Steel3424A1400000
    11/64"3 3/4"Steel3424A1500000
    3/16"3 3/4"Steel3424A1600000
    13/64"3 3/4"Steel3424A1700000
    7/32"3 3/4"Steel3424A1800000
    1/4"3 3/4"Steel3424A1900000
    17/64"4 1/2"Steel3424A2100000
    9/32"4 1/2"Steel3424A2200000
    5/16"4 1/2"Steel3424A2300000
    11/32"4 1/2"Steel3424A2400000
    3/8"4 1/2"Steel3424A2500000
    13/32"4 1/2"Steel3424A2600000
    7/16"4 1/2"Steel3424A2700000
    1/2"4 3/4"Steel3424A2800000
    9/16"5"Steel3424A2900000
    5/8"5"Steel3424A3200000
    3/4"5"Steel3424A5100000
    13/16"5"Steel3424A5800000
    7/8"5"Steel3424A5200000
    1"5"Steel3424A5300000
    2 mm3 3/4"Steel3424A5900000
    3 mm3 3/4"Steel3424A6100000
    4 mm3 3/4"Steel3424A6200000
    5 mm3 3/4"Steel3424A6300000
    6 mm3 3/4"Steel3424A6400000
    7 mm4 1/4"Steel3424A6500000
    8 mm4 1/4"Steel3424A6600000
    9 mm4 1/4"Steel3424A6700000
    10 mm4 1/4"Steel3424A6800000
    11 mm4 1/4"Steel3424A6900000
    12 mm4 1/4"Steel3424A7100000
    13 mm4 1/4"Steel3424A7200000
    14 mm5"Steel3424A7300000
    15 mm5"Steel3424A7400000
    16 mm5"Steel3424A7500000
    18 mm5"Steel3424A7600000
    20 mm5"Steel3424A7700000
     

    Hammer-Driven Hole Punch Sets

    Image of Product. Front orientation. Hole Punches. Hammer-Driven Hole Punch Sets.
    The handle and punch are one complete tool.
    Includes
    For Hole Dia.
    Material
    Container
    Type
    Each
    For Cork, Fabric, Leather, Rubber
    6 Punches1/8", 5/32", 3/16", 1/4", 5/16", 3/8"SteelPlastic Pouch3424A41000000
    6 Punches1/2", 9/16", 5/8", 3/4", 7/8", 1"SteelPlastic Pouch3424A42000000
     
    For Brass, Copper, Fabric, Leather, Rubber
    5 Punches, 5"-Lg. Awl, 7"-Lg. Snips with a 1 3/4" Cut Length1/4", 3/8", 1/2", 5/8", 3/4"SteelNylon Pouch3491A11000000
    5 Punches1 1/16", 1 1/4", 1 3/8", 1 5/8", 1 3/4"SteelNylon Pouch3429A67000000
    7 Punches3/16", 5/16", 7/16", 9/16", 11/16", 13/16", 15/16"SteelNylon Pouch3429A12000000
    7 Punches1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1"SteelNylon Pouch3429A11000000
     
    For Brass, Copper, Cork, Fabric, Leather, Rubber
    6 Punches3/16", 1/4", 5/16", 3/8", 7/16", 1/2"SteelPlastic Pouch3507A1100000
     

    Economy Hammer-Driven Gasket and Washer Hole Punch Sets

    Image of Product. Front orientation. Hole Punches. Economy Hammer-Driven Gasket and Washer Hole Punch Sets.
    This set includes common ID and OD sizes to create gaskets and washers in two strikes.
    Includes
    For Hole Dia.
    Material
    Container
    Type
    Each
    For Brass, Cork, Fabric, Leather, Plastic, Rubber
    10 Punches, Handle1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1"SteelPlastic Case3430A12000000
     
    Replacement Punches
    For Hole
    Dia.
    Material
    Each
    1/4"Steel3430A21100000
    5/16"Steel3430A2120000
    3/8"Steel3430A2130000
    7/16"Steel3430A2140000
    1/2"Steel3430A2150000
    9/16"Steel3430A2160000
    5/8"Steel3430A2170000
    3/4"Steel3430A2180000
    7/8"Steel3430A2190000
    1"Steel3430A22100000

    Self-Centering Hammer-Driven Gasket and Washer Hole Punch Sets for Thin Materials

    Image of Product. Front orientation. Hole Punches. Self-Centering Hammer-Driven Gasket and Washer Hole Punch Sets for Thin Materials.
    For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.
    Includes
    For Hole Dia.
    Pilot Dia.
    For Max.
    Steel Thk.
    Material
    Container
    Type
    Each
    For Aluminum, Brass, Copper, Cork, Fiberglass, Iron, Leather, Plastic, Rubber, Stainless Steel, Steel
    4 Punches, 4 Pilots7/8", 1", 1 1/8", 1 1/4"3/4", 7/8", 1", 1 1/8"1/64"SteelPlastic Case3455A720000000
    9 Punches, 8 Pilots1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"1/64"SteelPlastic Case3455A71000000
    10 Punches, 9 Pilots3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 10 mm, 12 mm, 16 mm0.6 mmSteelPlastic Case3455A73000000
     

    Quick-Release Hammer-Driven Gasket and Washer Hole Punch Sets

    Image of Product. Front orientation. Hole Punches. Quick-Release Hammer-Driven Gasket and Washer Hole Punch Sets.
    Quickly switch between inner and outer punches to create washers faster than with standard sets.
    Includes
    For Hole Dia.
    Material
    Container
    Type
    Each
    For Cork, Fabric, Fiberglass, Leather, Plastic, Rubber
    7 Punches, Centering Pin, Handle, Punch Cutting Pad1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1"SteelPlastic Case3466A150000000
    13 Punches, Centering Pin, Handle, Punch Cutting Pad1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"SteelPlastic Case3466A16000000
     

    Hammer-Driven Oblong Hole Punches

    Image of Product. Front orientation. Hole Punches. Hammer-Driven Oblong Hole Punches.
    Make oblong holes in soft, nonmetallic materials. These punches are also known as arch punches.
    For
    Hole
    Lg.
    Wd.
    Lg.
    Material
    Each
    For Fabric, Leather, Rubber
     
    Oblong
    1/2"7/64"4 3/4"Steel3503A11000000
    5/8"1/8"4 3/4"Steel3503A1500000
    3/4"9/64"5 1/4"Steel3503A1600000
    1"5/32"5 1/8"Steel3503A1200000
    1 1/4"11/64"5 1/4"Steel3503A1700000
    1 1/2"13/64"6 3/4"Steel3503A14000000
     

    Hammer-Driven Gasket and Washer Hole Punch Sets for Thin Materials

    Image of Product. Front orientation. Hole Punches. Hammer-Driven Gasket and Washer Hole Punch Sets for Thin Materials.
    Slide thin sheets of material into the included die block then punch an inner and outer hole to create a shim or washer.
    Includes
    For Hole Dia.
    For Max.
    Steel Thk.
    Material
    Container
    Type
    Each
    For Aluminum, Brass, Copper, Cork, Fabric, Fiberglass, Iron, Leather, Plastic, Rubber, Stainless Steel, Steel
    9 Punches1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"1/64"SteelPlastic Case3472A110000000
    9 Punches3.5 mm, 5 mm, 7 mm, 8.5 mm, 10 mm, 11.5 mm, 13.5 mm, 16.5 mm, 19.5 mm0.6 mmSteelPlastic Case3861A56000000
     
    back to top