About Cylinder Seals
Rod wipers scrape dirt, dust, and moisture from the rod, preventing contamination inside your cylinder.
Rod seals maintain the pressure inside cylinders and prevent fluid from leaking out.
Wear rings guide the rod and piston to prevent uneven wear and optimize seal performance.
Head seals are a more reliable alternative to the standard O-ring/backup ring combination—they resist twisting and remain stable even in applications with fluctuating pressure.
Buffering seals protect hydraulic cylinders from pressure spikes and shock in high-pressure hydraulic applications.
Cushioning seals minimize wear and noise in air-powered cylinders by preventing the piston from slamming against the cylinder body.
Piston seals make a seal between their outside edge and the cylinder bore to prevent internal leaks.
Ultra-High-Temperature Vermiculite Pipe Gaskets with Bolt Holes
Our highest temperature gaskets, these are made of vermiculite to withstand temperatures up to 1800° F. They are reinforced with a stainless steel insert for added strength under pressures up to 2,900 psi. Commonly called full-face gaskets, they cover the entire face of flat-surface pipe flanges and align with the bolt holes. Gaskets are compatible with low-pressure pipe flanges; all gasket specifications are sized to meet ANSI standards.
For technical drawings and 3-D models, click on a part number.
For Pipe Size | ID | OD | Thick. | No. of Bolt Holes | Max. Pressure, psi | Temperature Range, °F | Color | Each | |
For ANSI Class 150 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 27/32" | 3 1/2" | 1/16" | 4 | 740 | -235° to 1800° | Gold | 0000000 | 000000 |
| 3/4 | 1 1/16" | 3 7/8" | 1/16" | 4 | 740 | -235° to 1800° | Gold | 0000000 | 00000 |
| 1 | 1 5/16" | 4 1/4" | 1/16" | 4 | 740 | -235° to 1800° | Gold | 0000000 | 00000 |
| 1 1/2 | 1 29/32" | 5" | 1/16" | 4 | 740 | -235° to 1800° | Gold | 0000000 | 00000 |
| 2 | 2 3/8" | 6" | 1/16" | 4 | 740 | -235° to 1800° | Gold | 0000000 | 00000 |
| 2 1/2 | 2 7/8" | 7" | 1/16" | 4 | 740 | -235° to 1800° | Gold | 0000000 | 000000 |
| 3 | 3 1/2" | 7 1/2" | 1/16" | 4 | 740 | -235° to 1800° | Gold | 0000000 | 000000 |
| 4 | 4 1/2" | 9" | 1/16" | 8 | 740 | -235° to 1800° | Gold | 0000000 | 000000 |
| 6 | 6 5/8" | 11" | 1/16" | 8 | 740 | -235° to 1800° | Gold | 0000000 | 000000 |
Ultra-High-Temperature Chemical-Resistant Vermiculite Gasket Material
In addition to handling temperatures up to 1800° F, these vermiculite gasket sheets resist acids (except hydrofluoric), alkalies, and detergents. They have a stainless steel insert that provides strength under pressure. Use them when a strong seal is required in boilers and furnaces. Cut with a flush cutter, water jet, or laser cutter.
For technical drawings and 3-D models, click on a part number.
1/16" Thick. | 1/8" Thick. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg. | Max. Pressure, psi | Temperature Range, °F | Color | Insert Material | Each | Each | ||
| 6" | 6" | 740 | -235° to 1800° | Gold | Stainless Steel | 0000000 | 000000 | 0000000 | 0000000 |
| 15" | 15" | 740 | -235° to 1800° | Gold | Stainless Steel | 0000000 | 000000 | 0000000 | 000000 |
| 30" | 30" | 740 | -235° to 1800° | Gold | Stainless Steel | 0000000 | 000000 | 0000000 | 00000000 |
High-Speed Piston Seals
PTFE gives these seals a slippery surface that allows rod speeds more than two times faster than our other piston seals.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Bore Dia. | Dia. | Wd. | O-Ring Dash Number Equivalent | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Hardness | Color | Specifications Met | Each | |
Glass-Filled PTFE Plastic with Buna-N Rubber O-Ring | |||||||||||||
| 1/2" | 0.240" | 0.083" | 010 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 00000 |
| 3/4" | 0.490" | 0.083" | 014 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 7/8" | 0.615" | 0.083" | 016 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 1" | 0.740" | 0.083" | 018 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 1 1/4" | 0.990" | 0.083" | 022 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 1 1/2" | 1.241" | 0.083" | 025 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 2" | 1.604" | 0.129" | 129 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 2 1/4" | 1.858" | 0.129" | 133 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 2 1/2" | 2.108" | 0.129" | 137 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 3" | 2.608" | 0.129" | 145 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 3 1/4" | 2.858" | 0.129" | 149 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 3 1/2" | 3.108" | 0.129" | 151 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 4" | 3.608" | 0.129" | 153 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |