We will reply to your message within an hour.
These soft expanded PTFE gaskets are made of FDA-listed material for use with food and beverage.
Made of FDA-listed material for use with food and beverage.
Because this expanded PTFE tape is thicker than other gasket tape, it fills the irregularities on rough-surfaces flanges when compressed for a tight seal.
Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.
One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.
Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.
The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.
These Buna-N O-rings are made of FDA-listed material for use with food and beverage.
Softer than standard Viton® fluoroelastomer O-rings, these offer a better seal in low-pressure applications.
These are the highest purity chemical-resistant O-rings we offer. They are made and bagged in an ISO Class 7 and Fed. Spec. Class 10,000 clean room, plus they’re USP VI certified; not for use in medical applications.
Made and bagged in an ISO Class 7 and Fed. Spec. Class 10,000 clean room.
Rigid and hard with a slippery surface, these PTFE O-rings resist harsh chemicals, such as acetone, fluorinated solvents, methanol, and boric acid.
These temperature- and chemical-resistant O-rings prevent leaks in tube fittings that have a straight-thread connection, also known as O-ring boss fittings.
The FEP casing on these O-rings provides the same level of resistance to harsh chemicals as PTFE O-rings, but the core material is soft to make these O-rings more compressible.
Made of Kalrez 6230, these O-rings are for use when high purity is essential, such as with food and semiconductors.
Made and bagged in an ISO Class 7 (Fed. Std. Class 10,000) clean room, these are the highest purity high-temperature O-rings we offer.
Made of FDA-listed material for use with food and beverage, this cord stock resists animal and vegetable oils, citric acid, sodium bicarbonate, and grease.
This cord stock is made of FDA-listed material for use with food and beverage. It resists citric acid, diluted salt solutions, glycerin, and sodium bicarbonate.
Create round-profile O-rings for sealing applications near ovens and other hot areas in your food plant.
Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.
This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications.
Rated for pressure up to 10,000 psi, these leather U-cups handle over 80 times more pressure than our Buna-N U-cups.
These seals have a beveled lip that optimizes contact against the rod, while a secondary lip keeps the seal stable.
Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our buffering seals.
Avoid common O-ring failure in dynamic applications—the square base of these seals prevents twisting, while backup rings protect against extrusion.
Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our piston seals.
These wipers seal against the cylinder housing to prevent contaminants from entering between the outside edge and the housing.
Made from MDS-filled PTFE for a slippery surface, these wipers allow rods to move three times faster than other rod wipers.
Replace wipers in open-groove cylinders—these wipers have an integral steel case so they press fit into the groove around the rod.
Multiple internal springs ensure these seals keep the sealing surfaces in contact in demanding applications, such as agricultural, chemical, and mining pumps.
These leather V-ring packing seals handle over twice the pressure as PTFE. Leather is tough, pliable, and wear resistant, so it flexes to fit uneven surfaces and fill voids.
PTFE has excellent chemical resistance and withstands a wide temperature range of -110° F to 500° F.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.