In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Closed-cell foam restricts water, air, and gases from being absorbed.

For technical drawings and 3-D models, click on a part number.

Made of FDA-listed material for use with food and beverage, these PTFE seals are lubricated with mineral oil. Use them in pumps for applications involving acids, alkalies, brines, and solvents. Cut these seals to size with a knife; then pack them into place.

Also known as 100% GFO, these expanded PTFE seals contain graphite powder, which dissipates heat away from the shaft and allows pumps to run cool at high speeds. Use them in applications involving acids, alkalies, brines, and solvents. Cut these seals to size with a knife; then pack them into place.

Aramid and PTFE fibers are blended for seals that resist chemicals and abrasion. Use these seals in pumps for applications involving acids, alkalies, brines, and solvents. Cut them to size with a knife; then pack them into place.

Built for high-speed pump and valve applications, these super-tough seals are made of expanded-graphite yarn with carbon-yarn corners. Use them with acids, alkalies, brines, and solvents. Cut these seals to size with a knife; then pack them into place.

These lubricated PTFE fiber seals stand up to acids, alkalies, brines, and solvents. Use them in pumps and valves. Cut these seals to size with a knife; then pack them into place.

These seals are made of PTFE fiber without a lubricant, so they’re harder than other chemical-resistant packing seals to handle high-pressure valve applications. Use them with acids, alkalies, brines, and solvents. Cut these seals to size with a knife; then pack them into place.

Offering excellent flexibility for steam applications in pumps and valves, these seals are made of expanded graphite yarn. Cut them to size with a knife; then pack them into place.

Made of graphite-impregnated carbon, these steam-resistant seals dissipate heat from the shaft to protect pumps and valves when operating at high speeds. Cut them to size with a knife; then pack them into place.

Use these graphite-impregnated graphite seals for steam applications in pumps and valves. Cut them to size with a knife; then pack them into place.

The Inconel-wire reinforcement in these expanded-graphite yarn seals ensures they keep their shape longer than the High-Flexibility Steam-Resistant Packing Seals. Use them for steam applications in valves. Cut these seals to size with a knife; then pack them into place.

Made of PTFE-impregnated synthetic fiber, these seals are for use in pumps. They're lubricated to prevent overheating. Cut these seals to size with a knife; then pack them into place.

These seals require lighter packing pressure than standard oil- and water-resistant packing seals, so they cause less friction and reduce shaft wear. They’re made of graphite-impregnated aramid fiber and are for use in pumps and valves. Cut these seals to size with a knife; then pack them into place.

Our most compressible packing seals, these require less pressure than any other to make an effective seal. They’re made of lubricated PTFE-impregnated aramid fiber and are for use in pumps. Cut these seals to size with a knife; then pack them into place.

The most abrasion resistant of all our packing seals, these are made of PTFE-impregnated aramid fiber that has been saturated in a lubricant. They are for use in pumps. Cut these seals to size with a knife; then pack them into place.

Synthetic yarn that’s comparable in strength to aramid is combined with graphite for soft seals that dissipate heat away from the shaft to extend the life of pumps. Cut these seals to size with a knife; then pack them into place.

Install between layers of packing seals to ensure lubricants are distributed evenly. Also known as lantern rings, these lubricating rings are made of PTFE. They can be cut with a knife.