We will reply to your message within an hour.
A digital display allows for easy reading of measurements.
Unlike other gauges that have multiple moving parts that can shake loose, these have only one internal part. They are the most shock-resistant gauges we offer.
The case material and connection threads are stainless steel for protection in corrosive environments, plus the dial is glycerin-filled to reduce needle flutter in high-vibration applications.
These gauges have a unique case design that eliminates the air bubble on the dial face, which can distort readings.
Gauges have an accuracy of ± 1% to ± 1.5%. They are suitable for critical processes that require high accuracy, such as hydraulic and laboratory applications.
Gauges have an accuracy of ± 2%.
These gauges can withstand both extremely cold and extremely hot temperatures.
These gauges have a liquid-filled dial that reduces needle flutter in high-vibration applications reaching 2,000 psi.
Use in low-pressure applications up to 160 psi.
Use in high-pressure applications up to 2,000 psi.
Unlike other gauges that measure the difference between your system and the atmosphere, these give measurements relative to zero pressure.
With an accuracy of ±0.25%, use these transmitters in applications that require highly accurate measurement of both pressure and vacuum, such as activating vacuum pumps.
Monitor and control vacuum pumps, air compressors, and hydraulics while viewing readings and warnings on the display.
Convert both pressure and vacuum into an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.
Remotely monitor pressure in general purpose applications such as pumping and compressing systems.
At least four times as accurate as standard pressure transmitters, these transmitters are ideal for use in laboratories and analytical testing applications.
Choose these transmitters when you need reliable pressure monitoring but not high accuracy.
FM approved and CSA certified for use in hazardous locations, these transmitters monitor pressure where combustible fumes may be present.
The diaphragm on these transmitters mounts flush with your system’s connection, leaving no room for thick liquids to clog or harden. They’re often used to monitor pressure in wastewater, paint, and adhesive-dispensing applications.
Fine-tune the pressure range on these transmitters to account for changes in pressure readings over time.
For use in sanitary applications such as food processing, these transmitters are 3-A certified.
Monitor and control pressure in portable HVAC systems, hydraulics, and oil and gas equipment. Unlike other pressure transmitters that measure the difference between your system and the atmosphere, these transmitters give measurements relative to zero pressure—regardless of altitude or temperature.
At least four times as accurate as standard vacuum transmitters, these transmitters sense vacuum at an accuracy of ±0.25%, making them ideal for use in laboratories and in analytical testing applications.
Convert vacuum into an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor vacuum or control equipment.
Account for changes in vacuum readings over time by fine-tuning the vacuum range on these transmitters.
View readings at the source with the dial indicator or remotely using a receiver—these transmitters measure the difference in pressure between two inputs in liquid applications.
Used with pumps, cooling systems, and other liquid applications, these transmitters remotely measure the difference in pressure between two inputs.
Safe for use in environments where flammable gases and vapors are present, these transmitters measure the difference in pressure between two process lines without needing to program your receiving device to correct for errors. They meet NEC safety standards for protection against an explosion.
Test and calibrate transmitters, gauges, and other equipment that measures pressure.
These gauges have a glycerin-filled dial to reduce needle flutter for precise readings in high-vibration applications.
With an accuracy of ±0.05%, these have the highest accuracy of all our test gauges.
Gauges have an accuracy of ±0.25%.
Calibrate the flow rate of metering pumps.
Install these gauges through the top of your tank to monitor diesel, fuel oil, or gasoline level.
For use with water, hydraulic fluid, and diesel, install these gauges through the top of your tank.
With a stainless steel float and float rod, these gauges resist corroding from chemicals.
Mount these gauges on the flat end of a horizontal, cylindrical tank to monitor diesel fuel, fuel oil, or gasoline level.
Using inches or centimeters instead of common levels, such as full or empty, these gauges are more precise than standard gauges when measuring liquid levels. They work with water, hydraulic fluid, or diesel.
Measure water, hydraulic fluid, or diesel fuel level in your drum.
The window and body are made from a single piece of plastic, making these sights more shatter resistant than sights with a glass window.
These sights have a glass window.
Easily view liquid movement and level changes from a distance—these sights have an indicator ball inside the glass window.
View tank contents from multiple angles through the plastic domed window.
With a thick glass window fused to a metal body, these sights resist cracking at high pressures.
Monitor food, brewery, chemical, pharmaceutical, and biotech processing lines with these sights that attach to quick-clamp fittings for fast installation and easy removal for cleaning.
Check the contents of your tank from multiple angles with the domed window. To mount these sights, fasten their extend flange to tank walls.
An extended flange makes these sights easy to bolt onto tank walls.
Press these sights into a hole in your tank wall; no additional mounting nuts are needed. They mount from the outside.
Mount these sights from the inside of your tank and secure with a lock nut.
Made with clear, shatter-resistant plastic, these indicators don't require a shield to protect them like other oil-level indicators, so you can check your hydraulic fluid or oil level from any angle.
Combine a pair of valves with a gauge glass and four guard rods to build a complete level indicator.
Avoid overfilling—these indicators pop up when your tank is almost full.
Monitor liquid level in applications that have vibration, high pressures, and high temperatures. These indicators are also known as armored level gauges.