Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Tape hides seams and smooths out corners. It has an adhesive back for bonding and requires joint compound for finishing. It can also be used to repair damaged walls.

Use this kit to prevent bull's eye breaks and minor chips from getting bigger.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

This tape has a higher density than standard tape for a better seal between threads.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

Formulated to flow into small spaces, use these sealants between fine threads.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start.

Remaining pliable over time, these high-temperature sealants protect against leaks caused by vibration and pressure—they naturally fill voids before leaks can develop.

This tape contains nickel to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals.

Press this pliable rope into place to hold glass in window frames and seal leaks.

These sealants don't degrade in sunlight.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Even when used under water, these adhesives maintain their strength.

For invisible bond lines, these adhesives dry clear.

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

Bond most materials without the strong odor of other epoxy adhesives.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

For flexible bonds that resist cracking, these adhesives stay pliable.

Invisibly bond glass and transparent plastics.

Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.

Remaining flexible after curing, these glue sticks accommodate joint movement.

Form bonds with twice the strength of our other spray adhesives.

This glue withstands temperatures up to 500° F.

Pull off a small piece of putty and stick lightweight objects to a surface.

Apply this glue-like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.

Often used on diesel engines, exhaust systems, and gas turbines, these adhesives withstand high temperatures and provide excellent electrical insulation.

Bond glass and stone to drywall, treated lumber, and subfloors.

Typically used in ovens and furnaces, these are the most efficient of our rigid high-temperature insulation sheets. Please note that they require special care when installing since the crumbly material is difficult to work with and will crack easily. Sheets lose strength over time and are intended to be installed behind another facing or insulation material.

Made of flexible composite paper, these sheets won't shrink or lose shape in the high temperatures of air furnaces and hot water tanks.

Hook-and-loop fasteners make it easy to install, remove, and reuse this flexible insulation. Use on steam, hot water, and process pipes and fittings.

Very rigid with a 0% water absorption rate, this insulation is unaffected by corrosive environments, organic solvents, and most acids. It is typically used in chemical-processing systems and underground lines.

Insulate rectangular ductwork.

Made with indium this solder is soft and malleable—even as temperatures approach absolute zero—allowing this solder to form an airtight seal between metal and certain non-metal materials. Thanks to its ribbon shape, this solder is easier to use on large, flat areas than wire solder.