Press Fit Glides | McMaster-Carr

Filter by

Leg Shape

Mount Type

Base Shape

Thread Size

For Leg OD

Base Diameter

For Leg ID

Base Material

Base Width

Overall Height

Capacity per Mount

1,000 lb. to 1,999 lb.

2,000 lb. to 3,999 lb.

Base Length

System of Measurement

Inch

Metric

Base Color

Black

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

REACH

Compliant

DFARS Specialty Metals

Thread Type

Cushion Material

Maximum Temperature

For Leg Outer Width

Thread Depth

Performance

126 Products

Press-Fit Protective Feet

Also known as glides, press these protective feet into tubular legs of tables, chairs, and other furniture to protect floors from scratches and wear.

For Round Legs

	For Leg		Base
	OD	ID	Dia.	Ht.	Pkg. Qty.		Pkg.
Black Plastic Base


		3/4"	0.59" to 0.68"	3/4"	37/64"	50	2436T61	000000
		7/8"	0.72" to 0.8"	7/8"	37/64"	50	2436T62	00000
		1"	0.84" to 0.93"	1"	37/64"	50	2436T63	00000

For Square Legs

	For Leg				Base
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Lg.	Wd.	Ht.	Pkg. Qty.		Pkg.
Black Plastic Base


		3/4"	3/4"	0.59"-0.68"	0.59"-0.68"	3/4"	3/4"	19/32"	50	2436T64	000000
		7/8"	7/8"	0.72"-0.8"	0.72"-0.8"	7/8"	7/8"	19/32"	50	2436T65	00000
		1"	1"	0.84"-0.93"	0.84"-0.93"	1"	1"	39/64"	50	2436T66	00000

For Rectangular Legs

	For Leg				Base
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Lg.	Wd.	Ht.	Pkg. Qty.		Pkg.
Black Plastic Base


		1"	2"	0.87"	1.87"	1"	2"	1/2"	25	2436T69	000000

Press-Fit Rigid Leveling Mounts

Push into the ends of chairs, tables, and other equipment with tubular legs to level them on uneven floors. Adjust these mounts up and down by turning the threaded base.

For Square Legs

Plastic Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor.

	For Leg
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount, lb.	Base Dia.	Overall Ht.		Each
Plastic Base


		3/4"	3/4"	5/8"	5/8"	220	1"	3/8" to 1 1/8"	4146T11	00000
		7/8"	7/8"	3/4"	3/4"	220	1"	3/8" to 1 1/8"	4146T12	0000
		1"	1"	7/8"	7/8"	330	1"	3/8" to 1 1/8"	4146T13	0000
		1 3/16"	1 3/16"	1 1/16"	1 1/16"	660	1 1/4"	3/8" to 1"	4146T14	0000
		1 3/8"	1 3/8"	1 1/4"	1 1/4"	660	1 1/4"	3/8" to 1"	4146T15	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	660	1 1/4"	3/8" to 1"	4146T16	0000
		1 3/4"	1 3/4"	1 5/8"	1 5/8"	660	1 3/4"	3/8" to 1 5/16"	4146T17	00000
		2"	2"	1 15/16"	1 15/16"	660	1 3/4"	3/8" to 1 5/16"	4146T18	00000

For Round Legs

Plastic Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor.

	For Leg
	ID	OD	Cap. per Mount, lb.	Base Dia.	Overall Ht.		Each
Plastic Base


		1 1/8"	1 1/4"	660	1 1/4"	3/8" to 1"	4146T21	00000
		1 3/8"	1 1/2"	660	1 1/4"	3/8" to 1"	4146T23	0000

Swivel Press-Fit Protective Feet

A swiveling base compensates for angled legs and uneven surfaces. Also known as glides, press these protective feet into tubular legs of tables, chairs, and other furniture to protect floors from scratches and wear.

For Round Legs


Plastic Base with Nickel-Plated Cover	Nickel-Plated Steel Base with Black Plastic Cushion

	For Leg		Base
	OD	ID	Dia.	Ht.		Each
Plastic Base with Nickel-Plated Cover


		3/4"	0.62" to 0.65"	1 1/8"	1 7/64"	2501T82	00000
		1"	0.87" to 0.9"	1 1/8"	11/16"	2501T86	0000

		Nickel-Plated Steel Base with Black Plastic Cushion


				7/8"	0.75" to 0.78"	1 1/8"	1 1/16"	2450T65	0000

Angled Press-Fit Protective Feet


Style 1	Style 2

Also known as glides, press these protective feet into tubular legs of tables, chairs, and other furniture to protect floors from scratches and wear.

For Square Legs


Style 1	Style 2

			For Leg				Base
	Style	For Leg Angle	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Lg.	Wd.	Ht.	Pkg. Qty.		Pkg.
Black Plastic Base


		1	Any	3/4"	3/4"	0.62"	0.62"	3/4"	3/4"	25/32"	25	2436T68	00000
		1	Any	3/4"	3/4"	0.65"	0.65"	3/4"	3/4"	25/32"	25	2436T67	0000
		1	Any	7/8"	7/8"	0.78"	0.78"	7/8"	7/8"	27/32"	25	27455T26	00000
		2	5°	3/4"	3/4"	0.62"-0.65"	0.62"-0.65"	3/4"	3/4"	21/32"	25	27455T21	00000
		2	15°	1"	1"	0.87"-0.93"	0.87"-0.93"	1"	1"	29/32"	25	27455T25	00000

High-Capacity Press-Fit Leveling Mount Inserts

Rated for high load capacity, use these inserts to connect threaded leveling mounts to machinery, instrument bases, and conveyor equipment with tubular legs. These inserts have pass-through holes that are partially threaded at the base. Tap mounts into place with a rubber hammer.

For Square Legs

Shown with

Brass

Insert

Installed

Plastic—The economical choice. These inserts can handle more weight than inserts with brass threads, but may wear out more quickly if frequently adjusted.

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount, lb.	Overall Ht.	Size	Type	Dp.	Temp., ° F		Each
Plastic


		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	3/8"-16	UNC	1 1/4"	-20 to 170	6675N32	00000
		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	1/2"-13	UNC	1 1/4"	-20 to 170	6675N42	0000
		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	5/8"-11	UNC	1 1/4"	-20 to 170	6675N52	0000
		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	3/4"-10	UNC	1 1/4"	-20 to 170	6675N62	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	3/8"-16	UNC	1 1/4"	-20 to 170	6675N31	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	1/2"-13	UNC	1 1/4"	-20 to 170	6675N41	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	5/8"-11	UNC	1 1/4"	-20 to 170	6675N51	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	3/4"-10	UNC	1 1/4"	-20 to 170	6675N61	0000
		2"	2"	1 3/4"	1 3/4"	3,500	2"	3/8"-16	UNC	1"	-20 to 170	6675N35	0000
		2"	2"	1 3/4"	1 3/4"	3,500	2"	1/2"-13	UNC	1"	-20 to 170	6675N45	0000
		2"	2"	1 3/4"	1 3/4"	3,500	2"	5/8"-11	UNC	1"	-20 to 170	6675N55	0000
		2"	2"	1 3/4"	1 3/4"	3,500	2"	3/4"-10	UNC	1"	-20 to 170	6675N65	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	3/8"-16	UNC	1"	-20 to 170	6675N34	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	1/2"-13	UNC	1"	-20 to 170	6675N44	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	5/8"-11	UNC	1"	-20 to 170	6675N54	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	3/4"-10	UNC	1"	-20 to 170	6675N64	0000

		Plastic with Brass Insert


				1"	1"	7/8"	7/8"	1,100	1 3/16"	3/8"-16	UNC	7/8"	30 to 195	60945K56	0000
				1"	1"	7/8"	7/8"	1,100	1 3/16"	1/2"-13	UNC	7/8"	30 to 195	60945K57	0000
				1 3/16"	1 3/16"	1 1/16"	1 1/16"	1,200	1 5/16"	3/8"-16	UNC	7/8"	30 to 195	60945K58	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	3/8"-16	UNC	3/4"	30 to 195	60945K25	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	1/2"-13	UNC	3/4"	30 to 195	60945K26	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	5/8"-11	UNC	15/16"	30 to 195	60945K27	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	3/4"-10	UNC	1 1/8"	30 to 195	60945K28	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,500	1 3/4"	3/8"-12	Acme	1 1/4"	-20 to 180	60945K36	0000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,500	1 3/4"	1/2"-10	Acme	1 1/4"	-20 to 180	60945K37	0000
				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	M10 × 1.5 mm	Metric	1"	-20 to 180	60945K75	0000
				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	M12 × 1.75 mm	Metric	1"	-20 to 180	60945K76	0000
				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	M16 × 2 mm	Metric	1"	-20 to 180	60945K77	0000
				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	M20 × 2.5 mm	Metric	1"	-20 to 180	60945K78	0000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	3/8"-16	UNC	3/4"	30 to 195	60945K21	00000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	1/2"-13	UNC	3/4"	30 to 195	60945K22	00000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	5/8"-11	UNC	15/16"	30 to 195	60945K23	00000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	3/4"-10	UNC	1 1/8"	30 to 195	60945K24	00000
				2"	2"	1 3/4"	1 3/4"	1,000	1 15/16"	3/8"-16	UNC	3/4"	30 to 195	60945K29	00000
				2"	2"	1 3/4"	1 3/4"	1,000	1 15/16"	1/2"-13	UNC	3/4"	30 to 195	60945K31	00000
				2"	2"	1 3/4"	1 3/4"	1,000	1 15/16"	5/8"-11	UNC	15/16"	30 to 195	60945K32	00000
				2"	2"	1 3/4"	1 3/4"	1,760	1 15/16"	3/4"-10	UNC	1 1/8"	30 to 195	60945K33	00000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	3/8"-12	Acme	1"	-20 to 180	60945K38	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	1/2"-10	Acme	1"	-20 to 180	60945K39	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	M10 × 1.5 mm	Metric	1"	-20 to 180	60945K79	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	M12 × 1.75 mm	Metric	1"	-20 to 180	60945K81	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	M16 × 2 mm	Metric	1"	-20 to 180	60945K82	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	M20 × 2.5 mm	Metric	1"	-20 to 180	60945K83	0000
				2"	2"	1 7/8"	1 7/8"	1,000	1 15/16"	3/8"-16	UNC	3/4"	30 to 195	60945K52	00000
				2"	2"	1 7/8"	1 7/8"	1,000	1 15/16"	1/2"-13	UNC	3/4"	30 to 195	60945K53	00000
				2"	2"	1 7/8"	1 7/8"	1,000	1 15/16"	5/8"-11	UNC	15/16"	30 to 195	60945K54	00000
				2"	2"	1 7/8"	1 7/8"	1,760	1 15/16"	3/4"-10	UNC	1 1/8"	30 to 195	60945K55	00000

For Rectangular Legs


Shown with Brass Insert Installed

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount, lb.	Overall Ht.	Size	Type	Dp.	Temp., ° F		Each
Plastic with Brass Insert


		3"	2"	2 3/4"	1 3/4"	1,760	1 15/16"	5/8"-11	UNC	15/16"	30 to 195	60945K49	000000
		3"	2"	2 3/4"	1 3/4"	1,760	1 15/16"	3/4"-10	UNC	1 1/8"	30 to 195	60945K51	00000

For Round Legs


Shown with Brass Insert Installed

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg				Thread
	ID	OD	Cap. per Mount, lb.	Overall Ht.	Size	Type	Dp.	Temp., ° F		Each
Plastic with Brass Insert


		1 5/16"	1 1/2"	1,500	1 11/16"	M10 × 1.5 mm	Metric	1"	-20 to 180	60945K91	00000
		1 5/16"	1 1/2"	1,500	1 11/16"	M12 × 1.75 mm	Metric	1"	-20 to 180	60945K92	0000
		1 5/16"	1 1/2"	1,500	1 11/16"	M16 × 2 mm	Metric	1"	-20 to 180	60945K93	0000
		1 3/8"	1 1/2"	1,000	1 11/16"	3/8"-16	UNC	3/4"	30 to 195	60945K13	00000
		1 3/8"	1 1/2"	1,000	1 11/16"	1/2"-13	UNC	3/4"	30 to 195	60945K14	00000
		1 3/8"	1 1/2"	1,000	1 11/16"	5/8"-11	UNC	15/16"	30 to 195	60945K15	00000
		1 3/8"	1 1/2"	1,000	1 11/16"	3/4"-10	UNC	1 1/8"	30 to 195	60945K42	00000
		1 9/16"	1 11/16"	1,000	1 11/16"	3/8"-16	UNC	7/8"	30 to 195	60945K84	00000
		1 9/16"	1 11/16"	1,000	1 11/16"	1/2"-13	UNC	7/8"	30 to 195	60945K85	00000
		1 9/16"	1 11/16"	1,000	1 11/16"	5/8"-11	UNC	7/8"	30 to 195	60945K86	00000
		1 11/16"	1 15/16"	1,000	1 15/16"	3/8"-16	UNC	3/4"	30 to 195	60945K65	00000
		1 11/16"	1 15/16"	1,000	1 15/16"	1/2"-13	UNC	3/4"	30 to 195	60945K66	00000
		1 11/16"	1 15/16"	1,000	1 15/16"	5/8"-11	UNC	15/16"	30 to 195	60945K67	00000
		1 11/16"	1 15/16"	1,760	1 15/16"	3/4"-10	UNC	1 1/8"	30 to 195	60945K68	00000
		1 11/16"	2"	2,000	1 15/16"	3/8"-16	UNC	1"	30 to 195	60945K411	0000
		1 11/16"	2"	2,000	1 15/16"	1/2"-13	UNC	1"	30 to 195	60945K412	0000
		1 13/16"	2"	2,000	1 15/16"	M10 × 1.5 mm	Metric	1"	-20 to 180	60945K95	0000
		1 13/16"	2"	2,000	1 15/16"	M12 × 1.75 mm	Metric	1"	-20 to 180	60945K96	0000
		1 13/16"	2"	2,000	1 15/16"	M16 × 2 mm	Metric	1"	-20 to 180	60945K97	0000
		1 13/16"	2"	2,000	1 15/16"	M20 × 2.5 mm	Metric	1"	-20 to 180	60945K98	0000
		1 7/8"	2"	2,000	1 15/16"	3/8"-16	UNC	1"	30 to 195	60945K413	0000
		1 7/8"	2"	2,000	1 15/16"	1/2"-13	UNC	1"	30 to 195	60945K414	0000
		1 7/8"	2"	2,000	1 15/16"	5/8"-11	UNC	1"	30 to 195	60945K415	0000
		1 15/16"	2"	1,000	1 15/16"	3/8"-16	UNC	3/4"	30 to 195	60945K16	00000
		1 15/16"	2"	1,000	1 15/16"	1/2"-13	UNC	3/4"	30 to 195	60945K17	00000
		1 15/16"	2"	1,000	1 15/16"	5/8"-11	UNC	15/16"	30 to 195	60945K46	00000
		1 15/16"	2"	1,760	1 15/16"	3/4"-10	UNC	1 1/8"	30 to 195	60945K48	00000
		2 1/4"	2 3/8"	1,700	1 15/16"	5/8"-11	UNC	1 1/2"	30 to 195	60945K88	00000

Press-Fit Leveling Mount Inserts

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

For Square Legs

Square inserts have flexible spring steel walls that grip the inside of the legs.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount	Overall Ht.	Size	Type	Dp.	Pkg. Qty.		Pkg.
Zinc-Plated Steel


		1"	1"	15/16"	15/16"	Not Rated	1 1/16"	1/4"-20	UNC	1/4"	4	2417T27	00000
		1"	1"	15/16"	15/16"	Not Rated	1 1/16"	5/16"-18	UNC	1/4"	4	2417T28	0000
		1"	1"	15/16"	15/16"	Not Rated	1 1/16"	3/8"-16	UNC	1/4"	4	2417T11	00000
		1 1/4"	1 1/4"	1 3/16"	1 3/16"	Not Rated	1 1/16"	1/4"-20	UNC	1/4"	4	2417T61	00000
		1 1/4"	1 1/4"	1 3/16"	1 3/16"	Not Rated	1 1/16"	5/16"-18	UNC	1/4"	4	2417T62	00000
		1 1/4"	1 1/4"	1 3/16"	1 3/16"	Not Rated	1 1/16"	3/8"-16	UNC	1/4"	4	2417T12	00000
		1 1/2"	1 1/2"	1 7/16"	1 7/16"	Not Rated	1 1/16"	3/8"-16	UNC	1/4"	4	2417T63	00000
		1 1/2"	1 1/2"	1 7/16"	1 7/16"	Not Rated	2 1/8"	1/2"-13	UNC	1/2"	1	2417T13	0000
		1 3/4"	1 3/4"	1 11/16"	1 11/16"	Not Rated	2 1/16"	1/2"-13	UNC	1/2"	1	2417T14	00000
		2"	2"	1 15/16"	1 15/16"	Not Rated	2 1/16"	1/2"-13	UNC	1/2"	1	2417T15	00000

For Round Legs

Image of Attribute. Front orientation. Contains Annotated.

Retaining clips hold the round inserts inside the legs.

	For Leg				Thread
	ID	OD	Cap. per Mount	Overall Ht.	Size	Type	Dp.	Pkg. Qty.		Pkg.
Zinc-Plated Steel


		11/16"	3/4"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	2417T26	00000
		11/16"	3/4"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	2417T29	00000
		15/16"	1"	Not Rated	9/16"	3/8"-16	UNC	3/8"	4	2417T18	00000
		15/16"	1"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	2417T16	00000
		15/16"	1"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	2417T17	00000
		1 3/16"	1 1/4"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	2417T19	00000
		1 3/16"	1 1/4"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	2417T21	00000
		1 3/16"	1 1/4"	Not Rated	5/8"	3/8"-16	UNC	3/8"	4	2417T22	00000
		1 7/16"	1 1/2"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	2417T23	00000
		1 7/16"	1 1/2"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	2417T24	00000
		1 7/16"	1 1/2"	Not Rated	5/8"	3/8"-16	UNC	3/8"	4	2417T25	00000
		1 15/16"	2"	Not Rated	3/8"	3/8"-16	UNC	3/8"	4	2417T32	00000
		1 15/16"	2"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	2417T31	00000
		2 7/16"	2 1/2"	Not Rated	5/8"	3/8"-16	UNC	3/8"	4	2417T33	00000