Rated to ANSI/ISEA 105 and 138 standards, these gloves offer complete protection from cuts, abrasions, and impacts. The higher the rating, the greater the protection. They’re often worn to handle sheet metal, install pipes, or maintain HVAC equipment. They fit snugly, so they won't limit your dexterity.

Handle sharp objects in cramped spaces where your hands might bump into heavy machinery. These gloves have bumpers on the back to protect against impacts. Made with polyethylene, they’ll also shield you from cuts and punctures. They’re textured for a secure grip, even when working with slippery objects.

All have an ANSI/ISEA 105 cut rating, which reflects the amount of force required to cut through them with a razor blade.

They’re also rated ANSI/ISEA 138 for how much impact they can absorb on a scale of 1 to 3. Higher ratings signify better protection for knuckles and fingers from impact injuries.

Often used in glass manufacturing and metal fabrication, these gloves protect your hands from sharp edges and intermittent heat. They’re rated to ANSI/ISEA 105 standards for cut and heat resistance. The ANSI heat rating reflects the amount of heat they can withstand before there’s a risk of second-degree burns. The higher the number, the greater the protection. Holding heavy objects may decrease the temperature rating.

ANSI cut ratings reflect the amount of force required to cut through them with a razor blade.

Made of leather, these gloves are more durable and wear-resistant than standard cut-protection gloves. All are rated to ANSI/ISEA 105 standards for cuts, punctures, abrasion, or heat.

All of these gloves have an ANSI cut rating, which reflects the amount of force required to cut through them with a razor blade. A4 is the common required minimum in industrial settings. The higher the rating, the greater the protection.

Often used for maintaining low-voltage electrical equipment, these gloves protect you from arc flashes and sharp edges. They meet ANSI/ISEA 105 standards for cut, abrasion, puncture, or heat resistance. They’re also tested to meet either NFPA 70E or ASTM F2675 standards for arc-flash protection. All have an arc rating, which measures their ability to insulate the wearer from burns. The higher the arc rating, the greater the flame resistance. Made with Aramid fabric, these gloves resist radiant heat and flames.

They also have an ANSI cut rating, which reflects the amount of force required to cut through them with a razor blade.

Snip circuit board leads, inspect silicon wafers, and handle other sharp components in clean rooms. Not only are these gloves rated to protect your hands from cuts, they’re also lint-free and unlined to prevent shedding. They’re cleaned and bagged in environments with low levels of particulates, so they won’t contaminate your work area.

All meet ANSI/ISEA 105 standards for various forms of protection, such as cuts, abrasions, and punctures.

Lined to keep hands warm and coated to prevent cuts, these gloves are often worn for work with sharp tools in cold environments. They meet ANSI/ISEA 105 standards for cut, abrasion, puncture, and impact resistance.

All have an ANSI cut rating, which reflects the amount of force required to cut through them with a razor blade. The higher the rating, the more protection they provide.

A coating on the palm adds grip and wear resistance to these cut-protection gloves. They’re rated to ANSI/ISEA standards for protecting hands from cuts, abrasions, and punctures. The thicker the gloves, the more wear they’ll withstand, but you’ll have less touch sensitivity.

All have an ANSI/ISEA 105 cut rating, which reflects the amount of force needed to cut through them with a razor blade.

Rated to ANSI/ISEA 105 standards for cut protection, these gloves shield hands from sharp tools and materials. All have an ANSI/ISEA 105 cut rating, which reflects the amount of force needed to cut through them with a razor blade.

Safeguard hands from cuts, impacts, and wintry weather—these gloves are tougher than standard cold-protection gloves. They’re packed with insulation to keep you warm while you work. All meet ANSI/ISEA 105 standards for resistance to cuts, abrasions, punctures, or heat. They also meet ANSI/ISEA 138 standards for impact resistance. The higher the rating, the greater the protection.

Protect your arms from the heat and flames of electrical arc flashes. These sleeves are tested to ASTM F2675 for arc-flash protection. Their arc rating measures their ability to protect against burns; the higher the arc rating, the greater the flame resistance. Check the minimum arc rating and PPE category provided for your workplace.

These sleeves also meet ANSI/ISEA 105 standards for cut protection. Rated A5, they are safe to use with cutting blades, knives, and sharp wire.

Often used in metal fabrication and glass manufacturing, these sleeves protect your arms from cuts and heat. They meet ANSI/ISEA 105 standards for various forms of protection, such as cut, abrasion, puncture, and heat resistance.

All have an ANSI cut rating, which reflects the amount of force needed to cut through them with a razor blade.

Use these sleeves alone or with gloves to protect your arms when handling sharp objects. They meet ANSI/ISEA 105 standards for various forms of protection, such as cut, abrasion, and puncture resistance.

All have an ANSI cut rating, which reflects the amount of force needed to cut through them with a razor blade.