McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    21 Products

    Ultra-Thin EVOH Chemical-Resistant Gloves

    Image of ProductInUse. Gloves with Sleeve. Front orientation. Gloves. Ultra-Thin EVOH Chemical-Resistant Gloves, EVOH/Polyethylene, Gloves with Sleeve.
    Image of ProductInUse. Gloves. Front orientation. Gloves. Ultra-Thin EVOH Chemical-Resistant Gloves, EVOH/Polyethylene, Gloves, Smooth, 15" Long.

    Gloves with Sleeve

    Gloves

    Wear as a liner or over other gloves to protect against esters as well as aromatic, chlorinated, and oxygenated solvents such as ketones and alcohols. These gloves are commonly used to handle spill cleanup. They’ve been tested according to EN 374 against different classes of chemicals. A Type B rating means they resist permeation for at least 30 minutes. These silver-film gloves are made from a blend of polyethylene and EVOH (ethylene vinyl alcohol).
    Garment
    Texture
    Thk.,
    mil
    Lg.
    Color
    For Use With
    Specs. Met
    EN Chemical
    Rating
    Choose a Size (Glove Size)
    Pair
    EVOH/Polyethylene
    GlovesSmooth2 1/215"SilverAcetone, Ethyl Acetate, Hydrochloric Acid, Hydrofluoric Acid, Hydrogen Peroxide, Isopropyl Alcohol, Methyl Ethyl Ketone (MEK), Methylene Chloride, Sodium Hydroxide (Caustic Soda), Sulfuric Acid, XyleneEN 374-1 Type BACDFGXS (6), S (7), M (8), L (9), 2XL (11)6075T21000000
    Gloves with SleeveSmooth2 1/229"SilverAcetone, Ethyl Acetate, Hydrochloric Acid, Hydrofluoric Acid, Hydrogen Peroxide, Isopropyl Alcohol, Methyl Ethyl Ketone (MEK), Methylene Chloride, Sodium Hydroxide (Caustic Soda), Sulfuric Acid, XyleneEN 374-1 Type BACDFGXL (10)6075T2200000
     

    Butyl Chemical-Resistant Gloves

    Image of ProductInUse. Smooth. Front orientation. Gloves. Butyl Chemical-Resistant Gloves.
    Image of ProductInUse. Textured. Front orientation. Gloves. Butyl Chemical-Resistant Gloves.

    Smooth

    Textured

    Protect your hands from esters, highly corrosive acids, and ketones such as acetone. Better at blocking out gases and vapors than other chemical-resistant gloves, these butyl gloves are often worn in chemical handling and aircraft manufacturing. All have been tested according to EN 374 against different classes of chemicals. A Type A rating means they resist permeation for at least 30 minutes.
    Static Control—Static-control gloves minimize the buildup of electrostatic charge to protect sensitive equipment.
    Smooth—Smooth gloves are best when you need a grip on dry surfaces.
    Textured—Textured gloves give you a better hold on wet or oily objects.
    Smooth
    Textured
    Thk.,
    mil
    Lg.
    Color
    For Use With
    Specs. Met
    EN Chemical
    Rating
    Choose a Size (Glove Size)
    Pair
    Pair
    Gloves
     
    Butyl
    2814"BlackAcetone, Ethyl Acetate, Hydrochloric Acid, Hydrofluoric Acid, Hydrogen Peroxide, Isopropyl Alcohol, Methyl Ethyl Ketone (MEK), Nitric Acid, Sodium Hydroxide (Caustic Soda), Sulfuric AcidEN 374-1 Type AABCIKLMNPSTM (8), L (9), XL (10), 2XL (11)5607T1810000005607T2060000000
     
    Butyl with Cotton Fabric Lining
    5714"BlackAcetone, Ethyl Acetate, Methyl Ethyl Ketone (MEK), Nitric Acid, Sodium Hydroxide (Caustic Soda), Sulfuric AcidEN 374-1 Type AABCILMNOSS (7), M (8), L (9), XL (10)———05607T12800000
     
    Static-Control Gloves
     
    Butyl
    2014"BlackAcetone, Ethyl Acetate, Methyl Ethyl Ketone (MEK), Nitric Acid, Sodium Hydroxide (Caustic Soda), Sulfuric AcidEN 374-1 Type AABCILMNOSS (7), M (8), L (9), XL (10)———05607T13400000
     

    Neoprene Chemical-Resistant Gloves

    From acids to alkalis, these neoprene gloves protect your hands from chemicals. They resist tears, have good dexterity, and stay flexible across a wide range of temperatures. They're often used when cleaning and maintaining equipment.
    Gloves
    Image of ProductInUse. Front orientation. Gloves. Neoprene Chemical-Resistant Gloves, Gloves.
    Neoprene-Coated Neoprene—Neoprene-coated neoprene gloves have two layers of coating for extra abrasion resistance.
    Textured—Textured gloves give you extra grip on wet or oily objects.
    EN 374-1 Type A—Gloves that meet EN 374 Type A or Type B standards protect against chemical permeation for at least 30 minutes. Each letter in the rating represents a chemical that these gloves were tested against.
    EN 388—Gloves that meet ANSI/ISEA 105 or EN 388 standards are rated for various forms of protection, such as cuts, abrasions, or punctures.
    Temp.
    EN Rating
    Pair
    Thk.,
    mil
    Lg.
    Color
    Min.
    Max.
    For Use With
    Specs. Met
    Chemical
    Mechanical
    Risk
    Heat
    Protection
    Choose a Size (Glove Size)
    1-11
    12-Up
    Neoprene-Coated Neoprene
     
    Textured with Open Cuff
    1714"BlackNot RatedNot RatedAcetone, Ethyl Acetate, Hydrochloric Acid, Hydrofluoric Acid, Methyl Ethyl Ketone (MEK), Sodium Hydroxide (Caustic Soda), Sulfuric Acid, XyleneEN 374-1 Type A, EN 388ABCEFGHIJKLMNOPST1111XS (7), M (8), L (9), XL (10), 2XL (11)9878N11000000000000
     
    Neoprene-Coated Neoprene with Nylon Fabric Lining
     
    Textured with Open Cuff
    3714"BlackNot Rated212° FAcetone, Ethyl Acetate, Hydrochloric Acid, Hydrofluoric Acid, Methyl Ethyl Ketone (MEK), Sodium Hydroxide (Caustic Soda), Sulfuric Acid, XyleneEN 374-1 Type A, EN 388, EN 407ABCEFGHIJKLMNOPST2121XX1XXXXS (7), M (8), L (9), XL (10), 2XL (11)9878N120000000000
     

    Protective Clothing Tape

    Image of ProductInUse. Front orientation. Protective Clothing Tape.
    Patch rips and seal gloves, boots, and respirators to clothing with this chemical-resistant tape.
    Material
    Wd.
    Lg.,
    ft.
    Color
    Overall
    Thk.
    Roll
    Dia.
    Each
    Polyolefin2"180Yellow0.0125"6 3/4"7846A1000000

    Chemical-Resistant Arm Sleeves

    Image of ProductInUse. Front orientation. Arm Sleeves. Chemical-Resistant Arm Sleeves.
    Use these sleeves alone or with gloves to protect your arm from oils and most acids.
    Neoprene Coating—Neoprene-coated nylon sleeves resist the most chemicals of the sleeves we carry.
    PVC Coating—PVC-coated polyester sleeves provide some chemical and acid resistance. They also protect your arm from abrasive material.
    Coating
    Material
    Coating
    Coverage
    Lg.
    Thk.,
    mil
    Cuff
    Style
    Color
    Clothing
    Size
    Pair
    Standard Sleeve
     
    Nylon Fabric
    Neoprene
    Full Hand18"13ElasticYellowOne Size5564T16000000
     
    Polyester Fabric
    PVC
    Full Hand18"17ElasticGreenOne Size5564T1200000
     

    Ultra-Thin Polyethylene Chemical-Resistant Gloves

    Image of ProductInUse. Front orientation. Gloves. Ultra-Thin Polyethylene Chemical-Resistant Gloves.
    Resistant to a broad range of acids, solvents, and other chemicals, these gloves are ideal for cleaning up spills. They’re made with five layers of polyethylene that block chemicals from reaching your hands, yet they’re still thin and lightweight. They’ve been tested according to EN 374 against different classes of chemicals. A Type A rating means they resist permeation for at least 30 minutes.
    Pair
    Texture
    Thk.,
    mil
    Lg.
    Color
    For Use With
    Specs. Met
    EN Chemical
    Rating
    Choose a Size (Glove Size)
    1-11
    12-Up
    Polyethylene—Powder-Free
    Smooth2 1/215"WhiteAcetone, Ethyl Acetate, Hydrochloric Acid, Isopropyl Alcohol, Methyl Ethyl Ketone (MEK), Mineral Spirits, Nitric Acid, Sodium Hydroxide (Caustic Soda), Sulfuric Acid, Turpentine, XyleneEN 374-1 Type AABCEFGHILMSXS (6), S (7), M (8), L (9), XL (10), 2XL (11)9651N107000000000000
     

    Glove Bags

    More flexible and portable than glove boxes, these glove bags are temporary enclosures that protect you while you work with hazardous or unknown material and isolate the material from outside air and moisture. They come with built-in gloves to shield your hands and prevent hand oils from getting inside. All have one or two zipper openings for depositing material and equipment. They collapse for storage and are sturdy enough to be used again, but replace them if they become contaminated.
    Polyethylene Bags with Polyethylene Gloves
    Image of ProductInUse. Back orientation. Contains MultipleImages. Glove Boxes and Bags. Glove Bags, Polyethylene.
    Image of Product. Front orientation. Glove Boxes and Bags. Glove Bags, Polyethylene, 1 Opening.
    Image of Product. Front orientation. Glove Boxes and Bags. Glove Bags, Polyethylene, 2 Openings.

    1 Opening

    2 Openings

    Polyethylene bags have a tubing connector for inflating them with a gas supply. They come with polyethylene gloves, which resist ozone and many oxidizing chemicals. For extra protection, there are also cotton liner gloves.
    Overall
    No. of
    Openings
    Opening
    Wd.
    Ht.
    Wd.
    Dp.
    Thk.,
    mil
    Glove
    Size
    Closure
    Method
    Max. Temp.,
    ° F
    Includes
    Each
    110"11"17"17"39Zipper2003/8" Tubing Connector, Cotton Liner Gloves5441N11000000
    110"12"20"20"39Zipper2003/8" Tubing Connector, Cotton Liner Gloves5441N1600000
    110"14"30"20"39Zipper2003/8" Tubing Connector, Cotton Liner Gloves5441N17000000
    118 3/4"12"27"17"39Zipper2003/8" Tubing Connector, Cotton Liner Gloves5441N12000000
    122 1/2"15"27"27"39Zipper2003/8" Tubing Connector, Cotton Liner Gloves5441N13000000
    133 1/2"18"37"27"39Zipper2003/8" Tubing Connector, Cotton Liner Gloves5441N14000000
    133 1/2"25"37"37"39Zipper2003/8" Tubing Connector, Cotton Liner Gloves5441N15000000
    210"12"20"20"39Zipper2003/8" Tubing Connector, Cotton Liner Gloves5441N18000000
    210"14"30"20"39Zipper2003/8" Tubing Connector, Cotton Liner Gloves5441N19000000
    back to top